Attachment 97795 Details for Bug 76711 – dmesg

dmesg

3200X1800_with_patch.dmesg (text/plain), 82.03 KB, created by Guo Jinxian on 2014-04-23 03:21:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-04-23 03:21:46 UTC

Size: 82.03 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.0_prts_7525cd_20140423 (buildcustomizedkernel@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2 SMP Wed Apr 23 11:05:10 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//prts/7525cd2f9a8edcb84dde5a69ea51af70f3118bad/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe log_bug_len=4M modules_path=kernels//prts/7525cd2f9a8edcb84dde5a69ea51af70f3118bad/modules_x86_64/lib/modules/3.14.0_prts_7525cd_20140423 acpi_rsdp=0xab7e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a80b2fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a80b3000-0x00000000a80d0fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a80d1000-0x00000000ab0f5fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ab0f6000-0x00000000ab75dfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab75e000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03222000, 0x03222fff] PGTABLE
>[    0.000000] BRK [0x03223000, 0x03223fff] PGTABLE
>[    0.000000] BRK [0x03224000, 0x03224fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03225000, 0x03225fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa80b2fff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa7ffffff] page 2M
>[    0.000000]  [mem 0xa8000000-0xa80b2fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa80d1000-0xab0f5fff]
>[    0.000000]  [mem 0xa80d1000-0xa81fffff] page 4k
>[    0.000000]  [mem 0xa8200000-0xaaffffff] page 2M
>[    0.000000]  [mem 0xab000000-0xab0f5fff] page 4k
>[    0.000000] BRK [0x03226000, 0x03226fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x03227000, 0x03227fff] PGTABLE
>[    0.000000] ACPI: RSDP 00000000ab7e1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 00000000ab7c9188 000114 (v01 INTEL   BDW-ULT 00000000      01000013)
>[    0.000000] ACPI: FACP 00000000ab7d7000 0000F4 (v05 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 00000000a80b3000 01DFE9 (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 00000000ab799000 000040
>[    0.000000] ACPI: TCPA 00000000ab7df000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 00000000ab79c000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 00000000ab7de000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7dd000 00004E (v01 MeSsdt  MeSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 00000000ab7dc000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 00000000ab7db000 0005B1 (v01  Intel PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 00000000ab7da000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 00000000ab7d9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 00000000ab7d8000 000094 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 00000000ab7d6000 000038 (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 00000000ab7d5000 0000BC (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 00000000ab7d4000 00003C (v01 INTEL   BDW-ULT 00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 00000000ab7d3000 000104 (v01 INTEL   BDW-ULT 00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 00000000ab7d2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7cf000 002E26 (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7ce000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7cd000 00017F (v01 INTEL     zpodd 00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 00000000ab7cc000 000028 (v01  INTEL TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 00000000ab7cb000 00053B (v01  PmRef  Cpu0Ist 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7ca000 000B74 (v01 CpuRef  CpuSsdt 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7c2000 006F06 (v01 SaSsdt  SaSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7e0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 00000000ab7c1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 00000000ab7c0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 00000000ab7bf000 0000C4 (v01   INTL  BDW-ULT 00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 00000000ab7be000 0000F0 (v01 INTEL      BDW  00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 00000000ab7bd000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 00000000ab7bc000 0000A0 (v32 INTEL       HCG 00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 00000000ab7bb000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xa80b2fff]
>[    0.000000]   node   0: [mem 0xa80d1000-0xab0f5fff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1026194
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10884 pages used for memmap
>[    0.000000]   DMA32 zone: 696565 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa80b3000-0xa80d0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab0f6000-0xab75dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab75e000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74560 r8192 d23744 u262144
>[    0.000000] pcpu-alloc: s74560 r8192 d23744 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1010132
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//prts/7525cd2f9a8edcb84dde5a69ea51af70f3118bad/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe log_bug_len=4M modules_path=kernels//prts/7525cd2f9a8edcb84dde5a69ea51af70f3118bad/modules_x86_64/lib/modules/3.14.0_prts_7525cd_20140423 acpi_rsdp=0xab7e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3937144K/4104776K available (7316K kernel code, 706K rwdata, 3552K rodata, 22728K init, 596K bss, 167632K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.835 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.67 BogoMIPS (lpj=1795835)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000016] ACPI: Core revision 20131218
>[    0.022334] ACPI: All ACPI Tables successfully acquired
>[    0.022366] Security Framework initialized
>[    0.022671] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.023563] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.023965] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.023974] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.024205] CPU: Physical Processor ID: 0
>[    0.024208] CPU: Processor Core ID: 0
>[    0.025426] mce: CPU supports 7 MCE banks
>[    0.025439] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.025448] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>tlb_flushall_shift: 6
>[    0.025904] Freeing SMP alternatives memory: 32K (ffffffff83184000 - ffffffff8318c000)
>[    0.026581] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.036582] smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 1.80GHz (fam: 06, model: 3d, stepping: 03)
>[    0.036594] TSC deadline timer enabled
>[    0.036602] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.036610] ... version:                3
>[    0.036613] ... bit width:              48
>[    0.036615] ... generic registers:      4
>[    0.036617] ... value mask:             0000ffffffffffff
>[    0.036619] ... max period:             0000ffffffffffff
>[    0.036622] ... fixed-purpose events:   3
>[    0.036624] ... event mask:             000000070000000f
>[    0.036859] x86: Booting SMP configuration:
>[    0.036862] .... node  #0, CPUs:      #1
>[    0.049234] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.051350]  #2
>[    0.063756] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.078257]  #3
>[    0.078257] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.080327] x86: Booted up 1 node, 4 CPUs
>[    0.080334] smpboot: Total of 4 processors activated (14366.68 BogoMIPS)
>[    0.085451] devtmpfs: initialized
>[    0.085840] PM: Registering ACPI NVS region [mem 0xab75e000-0xab7b5fff] (360448 bytes)
>[    0.086002] xor: automatically using best checksumming function:
>[    0.095196]    avx       : 17116.000 MB/sec
>[    0.095225] RTC time: 19:20:55, date: 01/02/01
>[    0.095268] NET: Registered protocol family 16
>[    0.095687] cpuidle: using governor ladder
>[    0.095690] cpuidle: using governor menu
>[    0.095824] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.095827] ACPI: bus type PCI registered
>[    0.095889] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.095894] PCI: not using MMCONFIG
>[    0.095896] PCI: Using configuration type 1 for base access
>[    0.106012] bio: create slab <bio-0> at 0
>[    0.122235] raid6: sse2x1    5562 MB/s
>[    0.139252] raid6: sse2x2    6632 MB/s
>[    0.156271] raid6: sse2x4    7953 MB/s
>[    0.173287] raid6: avx2x1   10816 MB/s
>[    0.190305] raid6: avx2x2   12347 MB/s
>[    0.207323] raid6: avx2x4   14406 MB/s
>[    0.207326] raid6: using algorithm avx2x4 (14406 MB/s)
>[    0.207329] raid6: using avx2x2 recovery algorithm
>[    0.207393] ACPI: Added _OSI(Module Device)
>[    0.207396] ACPI: Added _OSI(Processor Device)
>[    0.207398] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.207401] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.220621] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.246496] ACPI: SSDT 00000000ab723a18 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.247462] ACPI: Dynamic OEM Table Load:
>[    0.247466] ACPI: SSDT           (null) 0004AE (v01  PmRef  Cpu0Cst 00003001 INTL 20130927)
>[    0.251657] ACPI: SSDT 00000000ab724818 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.252696] ACPI: Dynamic OEM Table Load:
>[    0.252699] ACPI: SSDT           (null) 000792 (v01  PmRef    ApIst 00003000 INTL 20130927)
>[    0.257497] ACPI: SSDT 00000000ab722d98 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.258459] ACPI: Dynamic OEM Table Load:
>[    0.258462] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20130927)
>[    0.266785] ACPI: Interpreter enabled
>[    0.266795] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
>[    0.266805] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.266829] ACPI: (supports S0 S3 S4 S5)
>[    0.266832] ACPI: Using IOAPIC for interrupt routing
>[    0.266857] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.269197] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.280267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.281023] ACPI: ACPI Dock Station Driver: 1 docks/bays found
>[    0.281768] ACPI: Power Resource [PG00] (on)
>[    0.287830] ACPI: Power Resource [PG01] (on)
>[    0.292820] ACPI: Power Resource [PG02] (on)
>[    0.353317] ACPI: Power Resource [FN00] (off)
>[    0.353450] ACPI: Power Resource [FN01] (off)
>[    0.353584] ACPI: Power Resource [FN02] (off)
>[    0.353713] ACPI: Power Resource [FN03] (off)
>[    0.353840] ACPI: Power Resource [FN04] (off)
>[    0.355205] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.355214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.355763] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.356397] PCI host bridge to bus 0000:00
>[    0.356401] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.356407] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.356411] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.356414] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.356418] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.356429] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.356721] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.356736] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.356744] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.356750] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.357020] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.357029] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.357319] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.357339] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.357402] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.357615] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.357683] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.357704] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.357769] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.358034] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.358052] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.358061] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.358069] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.358132] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.358336] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.358408] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.358778] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.358795] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.358803] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.358811] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.358819] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.358827] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.358836] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.358875] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.359125] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.359140] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.359161] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.359429] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.359458] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.359790] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.365811] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.365870] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.365926] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.365981] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.366035] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.366089] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.366143] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.366198] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.366500] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.366730] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.366911] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.366916] vgaarb: loaded
>[    0.366918] vgaarb: bridge control possible 0000:00:02.0
>[    0.367056] SCSI subsystem initialized
>[    0.367153] libata version 3.00 loaded.
>[    0.367274] ACPI: bus type USB registered
>[    0.367335] usbcore: registered new interface driver usbfs
>[    0.367369] usbcore: registered new interface driver hub
>[    0.367409] usbcore: registered new device driver usb
>[    0.367504] pps_core: LinuxPPS API ver. 1 registered
>[    0.367507] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.367531] PTP clock support registered
>[    0.367665] PCI: Using ACPI for IRQ routing
>[    0.373948] PCI: pci_cache_line_size set to 64 bytes
>[    0.373974] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.373976] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.373978] e820: reserve RAM buffer [mem 0xa80b3000-0xabffffff]
>[    0.373980] e820: reserve RAM buffer [mem 0xab0f6000-0xabffffff]
>[    0.373982] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.373983] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.374160] NetLabel: Initializing
>[    0.374163] NetLabel:  domain hash size = 128
>[    0.374165] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.374179] NetLabel:  unlabeled traffic allowed by default
>[    0.374326] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.374335] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.376362] Switched to clocksource hpet
>[    0.376440] pnp: PnP ACPI init
>[    0.376452] ACPI: bus type PNP registered
>[    0.376786] system 00:00: [io  0x06a4] has been reserved
>[    0.376790] system 00:00: [io  0x06a0] has been reserved
>[    0.376794] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.376898] pnp 00:01: [dma 4]
>[    0.376953] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.377009] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.377153] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.377246] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.377250] system 00:04: [io  0xffff] has been reserved
>[    0.377253] system 00:04: [io  0xffff] has been reserved
>[    0.377257] system 00:04: [io  0xffff] has been reserved
>[    0.377260] system 00:04: [io  0x1800-0x18fe] could not be reserved
>[    0.377264] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.377268] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.377358] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.377443] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.377448] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.377608] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.377768] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.378452] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.378457] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.378461] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.378465] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.378469] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.378472] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.378476] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.378480] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.378629] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active)
>[    0.393465] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active)
>[    0.398466] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active)
>[    0.399198] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.399203] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.399207] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.399211] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.399215] system 00:0d: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.399219] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.399222] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.399226] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.399229] system 00:0d: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.399233] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.399237] system 00:0d: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.399240] system 00:0d: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.399245] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.399580] system 00:0e: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.399585] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.399732] pnp: PnP ACPI: found 15 devices
>[    0.399734] ACPI: bus type PNP unregistered
>[    0.408593] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.408596] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.408598] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.408601] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff]
>[    0.408635] NET: Registered protocol family 2
>[    0.408803] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.408883] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.408956] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.408980] TCP: reno registered
>[    0.408991] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.409010] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.409075] NET: Registered protocol family 1
>[    0.409171] RPC: Registered named UNIX socket transport module.
>[    0.409177] RPC: Registered udp transport module.
>[    0.409179] RPC: Registered tcp transport module.
>[    0.409182] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.409192] pci 0000:00:02.0: Boot video device
>[    0.409293] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.409297] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    0.409406] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.409424] PCI: CLS 0 bytes, default 64
>[    0.931485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.931494] software IO TLB [mem 0xa40b3000-0xa80b3000] (64MB) mapped at [ffff8800a40b3000-ffff8800a80b2fff]
>[    0.931644] Simple Boot Flag at 0x47 set to 0x80
>[    0.933121] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.933196] audit: initializing netlink subsys (disabled)
>[    0.933213] audit: type=2000 audit(978463255.896:1): initialized
>[    0.963992] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.967445] VFS: Disk quotas dquot_6.5.2
>[    0.967525] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.968957] NFS: Registering the id_resolver key type
>[    0.968965] Key type id_resolver registered
>[    0.968968] Key type id_legacy registered
>[    0.968972] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.969242] fuse init (API version 7.22)
>[    0.969420] msgmni has been set to 7689
>[    0.969736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.969740] io scheduler noop registered
>[    0.969743] io scheduler deadline registered
>[    0.969802] io scheduler cfq registered (default)
>[    0.969994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.970115] efifb: probing for efifb
>[    0.971342] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 22500k, total 22500k
>[    0.971346] efifb: mode is 3200x1800x32, linelength=12800, pages=5625
>[    0.971349] efifb: scrolling: redraw
>[    0.971352] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.989858] Console: switching to colour frame buffer device 400x112
>[    1.007528] fb0: EFI VGA frame buffer device
>[    1.007708] ACPI: Fan [FAN0] (off)
>[    1.007787] ACPI: Fan [FAN1] (off)
>[    1.007863] ACPI: Fan [FAN2] (off)
>[    1.007937] ACPI: Fan [FAN3] (off)
>[    1.008012] ACPI: Fan [FAN4] (off)
>[    1.008456] Monitor-Mwait will be used to enter C-1 state
>[    1.008461] Monitor-Mwait will be used to enter C-2 state
>[    1.008464] Monitor-Mwait will be used to enter C-3 state
>[    1.008474] ACPI: acpi_idle registered with cpuidle
>[    1.010628] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.010662] ACPI: Thermal Zone [TZ00] (46 C)
>[    1.011479] thermal LNXTHERM:01: registered as thermal_zone1
>[    1.011512] ACPI: Thermal Zone [TZ01] (46 C)
>[    1.011644] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.032351] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.033253] Non-volatile memory driver v1.3
>[    1.033279] Linux agpgart interface v0.103
>[    1.035859] brd: module loaded
>[    1.036230] Loading iSCSI transport class v2.0-870.
>[    1.036853] iscsi: registered transport (tcp)
>[    1.037038] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.037109] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.037344] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
>[    1.037477] iscsi: registered transport (qla4xxx)
>[    1.037546] QLogic iSCSI HBA Driver
>[    1.037651] DC390: clustering now enabled by default. If you get problems load
>[    1.037690]        with "disable_clustering=1" and report to maintainers
>[    1.037811] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.037966] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.038036] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.038172] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.038282] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.038581] SCSI Media Changer driver v0.25 
>[    1.038688] ahci 0000:00:1f.2: version 3.0
>[    1.038811] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    1.038851] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    1.038897] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.039756] scsi0 : ahci
>[    1.039931] scsi1 : ahci
>[    1.040100] scsi2 : ahci
>[    1.040282] scsi3 : ahci
>[    1.040401] ata1: DUMMY
>[    1.040420] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    1.040460] ata3: DUMMY
>[    1.040474] ata4: DUMMY
>[    1.043053] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    1.043126] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.043297] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.043331] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.043405] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.043443] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.043528] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.043560] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.043735] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.043801] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.206841] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.206878] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
>[    1.206920] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.206995] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.207094] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.207132] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.207305] usbcore: registered new interface driver zd1201
>[    1.207383] usbcore: registered new interface driver catc
>[    1.207452] usbcore: registered new interface driver kaweth
>[    1.207483] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.207562] usbcore: registered new interface driver pegasus
>[    1.207635] usbcore: registered new interface driver rtl8150
>[    1.207708] usbcore: registered new interface driver asix
>[    1.207779] usbcore: registered new interface driver ax88179_178a
>[    1.207852] usbcore: registered new interface driver cdc_ether
>[    1.207924] usbcore: registered new interface driver dm9601
>[    1.207996] usbcore: registered new interface driver gl620a
>[    1.208073] usbcore: registered new interface driver net1080
>[    1.208144] usbcore: registered new interface driver plusb
>[    1.208214] usbcore: registered new interface driver rndis_host
>[    1.208288] usbcore: registered new interface driver cdc_subset
>[    1.208361] usbcore: registered new interface driver zaurus
>[    1.208434] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.208519] usbcore: registered new interface driver cdc_ncm
>[    1.208759] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.208795] ehci-pci: EHCI PCI platform driver
>[    1.208903] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.208938] ohci-pci: OHCI PCI platform driver
>[    1.209005] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.209211] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.209249] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
>[    1.209314] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.211803] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.214240] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.214262] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.214325] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.216670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.219030] usb usb1: Product: xHCI Host Controller
>[    1.221365] usb usb1: Manufacturer: Linux 3.14.0_prts_7525cd_20140423 xhci_hcd
>[    1.223706] usb usb1: SerialNumber: 0000:00:14.0
>[    1.226258] hub 1-0:1.0: USB hub found
>[    1.228595] hub 1-0:1.0: 11 ports detected
>[    1.234493] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.236942] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.239342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.241685] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.244021] usb usb2: Product: xHCI Host Controller
>[    1.246346] usb usb2: Manufacturer: Linux 3.14.0_prts_7525cd_20140423 xhci_hcd
>[    1.248682] usb usb2: SerialNumber: 0000:00:14.0
>[    1.251285] hub 2-0:1.0: USB hub found
>[    1.253642] hub 2-0:1.0: 4 ports detected
>[    1.257583] usbcore: registered new interface driver usb-storage
>[    1.260114] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.262468] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.265285] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.267806] mousedev: PS/2 mouse device common for all mice
>[    1.270416] rtc_cmos 00:05: RTC can wake from S4
>[    1.272962] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.275383] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.277817] i2c /dev entries driver
>[    1.280361] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.283617] usbcore: registered new interface driver usbhid
>[    1.286018] usbhid: USB HID core driver
>[    1.288597] TCP: cubic registered
>[    1.291022] Initializing XFRM netlink socket
>[    1.293478] NET: Registered protocol family 17
>[    1.295912] Key type dns_resolver registered
>[    1.299012] registered taskstats version 1
>[    1.301850] bio: create slab <bio-1> at 1
>[    1.304641] Btrfs loaded
>[    1.307286]   Magic number: 1:404:343
>[    1.309724] tty tty60: hash matches
>[    1.312141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.313107] PM: Hibernation image not present or could not be loaded.
>[    1.313126] Warning: unable to open an initial console.
>[    1.345081] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.347749] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.350155] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.352906] ata2.00: configured for UDMA/133
>[    1.355407] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5
>[    1.358259] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.358378] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.363074] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.365493] sd 1:0:0:0: [sda] Write Protect is off
>[    1.367861] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.367874] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.374902]  sda: sda1 sda2 sda3 sda4 sda5
>[    1.377916] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.384640] Freeing unused kernel memory: 22728K (ffffffff81b52000 - ffffffff83184000)
>[    1.426808] dracut: dracut-018-35.git20120510.fc17
>[    1.461661] udevd[1416]: starting version 182
>[    1.479687] [drm] Initialized drm 1.1.0 20060810
>[    1.485672] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    1.489625] ACPI: Lid Switch [LID0]
>[    1.493358] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>[    1.495901] ACPI: Power Button [PWRB]
>[    1.496237] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>[    1.496317] ACPI: Sleep Button [SLPB]
>[    1.496407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.496469] ACPI: Power Button [PWRF]
>[    1.499876] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,
>[    1.499876] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.500423] [drm] Memory usable by graphics device = 4096M
>[    1.500424] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.500425] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.500427] checking generic (b0000000 15f9000) vs hw (b0000000 10000000)
>[    1.500428] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
>[    1.533166] Console: switching to colour dummy device 80x25
>[    1.547877] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018
>[    1.547886] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.547888] [drm:intel_opregion_setup] SWSCI supported
>[    1.552999] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.553004] [drm:intel_opregion_setup] ASLE supported
>[    1.553055] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.553070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.553075] [drm] Driver supports precise vblank timestamp query.
>[    1.553078] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.553081] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.553084] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.553085] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.553087] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.553090] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.553094] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 0 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x8 0xa
>[    1.553096] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    1.553098] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.553101] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.553104] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.553105] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.553107] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.553109] [drm:parse_mipi] No MIPI config BDB found
>[    1.553112] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.553114] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.553116] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.553118] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.553119] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.553121] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.553193] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.553199] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.553202] [drm:intel_display_power_get] enabling always-on
>[    1.553203] [drm:intel_display_power_get] enabling display
>[    1.553207] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.553268] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.553270] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.553271] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.553273] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.553275] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.553277] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.553279] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.553280] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.553282] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.553283] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.553285] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.553287] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.553288] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.553290] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.553292] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.553294] [drm:intel_modeset_init] 3 display pipes available.
>[    1.553310] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    1.553616] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.553771] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.553774] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.553776] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.553778] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.553779] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.553925] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.553932] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.554235] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00
>[    1.554404] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[    1.554406] [drm:intel_dp_get_dpcd] Displayport TPS3 supported
>[    1.554417] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.578239] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.578242] [drm] VBT doesn't support DRRS
>[    1.578337] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.578349] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.578440] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.583954] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[    1.583958] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[    1.583960] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[    1.583963] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x00000000
>[    1.583968] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[    1.583970] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A
>[    1.583972] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[    1.583976] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[    1.583979] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled
>[    1.583981] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled
>[    1.583983] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[    1.583986] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    1.583987] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.583989] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    1.583991] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.583994] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 3157174, gmch_n: 8388608, link_m: 350797, link_n: 524288, tu: 64
>[    1.583995] [drm:intel_dump_pipe_config] requested mode:
>[    1.583998] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 3200 0 0 0 1800 0 0 0 0x0 0x0
>[    1.584000] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.584002] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.584005] [drm:intel_dump_crtc_timings] crtc timings: 361309 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x0 flags: 0xa
>[    1.584007] [drm:intel_dump_pipe_config] port clock: 540000
>[    1.584008] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    1.584010] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.584012] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x0c800708, enabled
>[    1.584014] [drm:intel_dump_pipe_config] ips: 0
>[    1.584015] [drm:intel_dump_pipe_config] double wide: 0
>[    1.584017] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[    1.584019] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.584020] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.584022] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.584024] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.584025] [drm:intel_dump_pipe_config] requested mode:
>[    1.584028] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.584029] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.584032] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.584034] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.584036] [drm:intel_dump_pipe_config] port clock: 0
>[    1.584037] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.584039] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.584041] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.584042] [drm:intel_dump_pipe_config] ips: 0
>[    1.584043] [drm:intel_dump_pipe_config] double wide: 0
>[    1.584045] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[    1.584047] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.584048] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.584050] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.584052] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.584053] [drm:intel_dump_pipe_config] requested mode:
>[    1.584056] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.584057] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.584059] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.584062] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.584063] [drm:intel_dump_pipe_config] port clock: 0
>[    1.584065] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.584066] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.584068] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.584069] [drm:intel_dump_pipe_config] ips: 0
>[    1.584071] [drm:intel_dump_pipe_config] double wide: 0
>[    1.584077] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    1.584080] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    1.584082] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    1.584084] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    1.584086] [drm:check_crtc_state] [CRTC:5]
>[    1.584094] [drm:check_crtc_state] [CRTC:8]
>[    1.584097] [drm:check_crtc_state] [CRTC:11]
>[    1.584102] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=3200x1800@32, offset=0, pitch 12800, size 0x15f9000
>[    1.584104] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=15f9000
>[    1.584107] [drm:i915_pages_create_for_stolen] offset=0x0, size=23040000
>[    1.584111] [drm:intel_alloc_plane_obj] plane fb obj ffff880149d46180
>[    1.584114] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 15f9000
>[    1.584116] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [15f9000, fffff000]
>[    1.586706] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.586709] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.586711] [drm:i915_gem_context_init] HW context support initialized
>[    1.586791] [drm:init_status_page] render ring hws offset: 0x0160b000
>[    1.586964] usb 1-2: new high-speed USB device number 2 using xhci_hcd
>[    1.586968] [drm:init_pipe_control] render ring pipe control offset: 0x0162c000
>[    1.586974] [drm:init_status_page] bsd ring hws offset: 0x0162d000
>[    1.587042] [drm:init_status_page] blitter ring hws offset: 0x0164e000
>[    1.587103] [drm:init_status_page] video enhancement ring hws offset: 0x0166f000
>[    1.587341] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
>[    1.587344] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[    1.587536] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    1.587711] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.587723] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.587728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
>[    1.587734] [drm:drm_mode_debug_printmodeline] Modeline 15:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.587738] [drm:drm_mode_debug_printmodeline] Modeline 16:"3200x1800" 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa
>[    1.587742] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1]
>[    1.587745] [drm:intel_dp_detect] [CONNECTOR:23:DP-1]
>[    1.587750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected
>[    1.587753] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1]
>[    1.587756] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1]
>[    1.587912] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.587915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.587918] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected
>[    1.587921] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
>[    1.587930] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[    1.588091] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.588093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.588096] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
>[    1.588098] [drm:drm_setup_crtcs] 
>[    1.588101] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.588104] [drm:drm_enable_connectors] connector 23 enabled? no
>[    1.588106] [drm:drm_enable_connectors] connector 24 enabled? no
>[    1.588108] [drm:drm_enable_connectors] connector 26 enabled? no
>[    1.588111] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14
>[    1.588114] [drm:intel_fb_initial_config] looking for preferred mode on connector 14
>[    1.588117] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 3200x1800
>[    1.588119] [drm:intel_fb_initial_config] connector 23 not enabled, skipping
>[    1.588121] [drm:intel_fb_initial_config] connector 24 not enabled, skipping
>[    1.588124] [drm:intel_fb_initial_config] connector 26 not enabled, skipping
>[    1.588126] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 5
>[    1.588130] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.588133] [drm:i915_gem_object_create_stolen] creating stolen object: size=15f9000
>[    1.609593] [drm:intelfb_create] allocated 3200x1800 fb: 0x01690000, bo ffff8800aae78600
>[    1.609725] fbcon: inteldrmfb (fb0) is primary device
>[    1.609825] [drm:intel_crtc_cursor_set] cursor off
>[    1.609828] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    1.609830] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.609832] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.609835] [drm:drm_mode_debug_printmodeline] Modeline 28:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.609836] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[    1.609838] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    1.609840] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.609843] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[    1.609845] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
>[    1.609846] [drm:intel_dp_compute_config] clamping bpp for eDP panel to BIOS-provided 18
>[    1.609848] [drm:intel_dp_compute_config] DP link bw 14 lane count 2 clock 540000 bpp 18
>[    1.609849] [drm:intel_dp_compute_config] DP link bw required 650358 available 864000
>[    1.609851] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[    1.609852] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[    1.609853] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.609854] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    1.609856] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.609857] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6314349, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    1.609858] [drm:intel_dump_pipe_config] requested mode:
>[    1.609860] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.609861] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.609863] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.609865] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    1.609865] [drm:intel_dump_pipe_config] port clock: 540000
>[    1.609866] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    1.609868] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.609869] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.609869] [drm:intel_dump_pipe_config] ips: 1
>[    1.609870] [drm:intel_dump_pipe_config] double wide: 0
>[    1.626972] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.626978] [drm:intel_edp_backlight_off] 
>[    1.643165] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.766101] usb 1-2: New USB device found, idVendor=0b95, idProduct=772a
>[    1.766104] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.766106] usb 1-2: Product: AX88x72A
>[    1.766108] usb 1-2: Manufacturer: ASIX Elec. Corp.
>[    1.766110] usb 1-2: SerialNumber: 0000BF
>[    1.827991] [drm:wait_panel_off] Wait for panel power off time
>[    1.827995] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.882972] [drm:wait_panel_status] Wait complete
>[    1.882978] [drm:intel_update_fbc] no output, disabling
>[    1.882983] [drm:intel_display_power_put] disabling display
>[    1.882984] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.882997] [drm:ironlake_update_primary_plane] Writing base 01690000 00000000 0 0 12800
>[    1.883005] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    1.883008] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:3200x1800]
>[    1.883009] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
>[    1.883011] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.883014] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.932822] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    2.070725] asix 1-2:1.0 eth1: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, 00:24:8c:01:85:04
>[    2.223772] usb 1-5: new low-speed USB device number 3 using xhci_hcd
>[    2.392084] usb 1-5: New USB device found, idVendor=413c, idProduct=3010
>[    2.392086] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.392346] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.395054] input: HID 413c:3010 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:3010.0001/input/input5
>[    2.395258] hid-generic 0003:413C:3010.0001: input,hidraw0: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:14.0-5/input0
>[    2.428777] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.428780] [drm:wait_panel_status] Wait complete
>[    2.428783] [drm:wait_panel_on] Wait for panel power on
>[    2.428786] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.547642] usb 1-6: new low-speed USB device number 4 using xhci_hcd
>[    2.637699] [drm:wait_panel_status] Wait complete
>[    2.637705] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.637711] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.638826] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.639298] [drm:intel_dp_set_signal_levels] Using signal levels 03000000
>[    2.639761] [drm:intel_dp_set_signal_levels] Using signal levels 06000000
>[    2.640224] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.640997] [drm:intel_dp_set_signal_levels] Using signal levels 07000000
>[    2.641761] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.641973] [drm:intel_edp_backlight_on] 
>[    2.641976] [drm:intel_panel_enable_backlight] pipe A
>[    2.641981] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.641984] [drm:intel_edp_psr_match_conditions] PSR disable by flag
>[    2.661546] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression
>[    2.661551] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[    2.661555] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[    2.661558] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
>[    2.661560] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.661561] [drm:check_crtc_state] [CRTC:5]
>[    2.661570] [drm:check_crtc_state] [CRTC:8]
>[    2.661571] [drm:check_crtc_state] [CRTC:11]
>[    2.661574] [drm:intel_crtc_cursor_set] cursor off
>[    2.661576] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.661578] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.661581] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.661583] [drm:intel_crtc_cursor_set] cursor off
>[    2.661584] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.661586] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.661587] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.661593] Console: switching to colour frame buffer device 400x112
>[    2.661602] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.661604] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.661606] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.698545] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.698609] i915 0000:00:02.0: registered panic notifier
>[    2.705381] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.706312] acpi device:17: registered as cooling_device9
>[    2.706515] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    2.707242] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.711102] dracut: Starting plymouth daemon
>[    2.719429] usb 1-6: New USB device found, idVendor=045e, idProduct=0750
>[    2.719505] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.719586] usb 1-6: Product: Wired Keyboard 600
>[    2.719635] usb 1-6: Manufacturer: Microsoft
>[    2.719824] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.719827] usb 1-6: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.719895] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.719898] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.719900] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.723724] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0750.0002/input/input7
>[    2.723883] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-6/input0
>[    2.729627] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:045E:0750.0003/input/input8
>[    2.729795] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-6/input1
>[    2.743260] [drm:i915_gem_open] 
>[    2.743284] [drm:intel_crtc_cursor_set] cursor off
>[    2.743288] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.743292] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.743295] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743298] [drm:intel_crtc_cursor_set] cursor off
>[    2.743299] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.743301] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.743303] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743305] [drm:intel_crtc_cursor_set] cursor off
>[    2.743306] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.743308] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.743310] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743320] [drm:i915_gem_open] 
>[    2.743330] [drm:intel_crtc_cursor_set] cursor off
>[    2.743332] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.743334] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.743336] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743337] [drm:intel_crtc_cursor_set] cursor off
>[    2.743339] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.743341] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.743343] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743344] [drm:intel_crtc_cursor_set] cursor off
>[    2.743345] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.743347] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.743349] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743355] [drm:i915_gem_open] 
>[    2.743612] [drm:intel_crtc_cursor_set] cursor off
>[    2.743616] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.743619] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.743623] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743626] [drm:intel_crtc_cursor_set] cursor off
>[    2.743628] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.743631] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.743634] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743636] [drm:intel_crtc_cursor_set] cursor off
>[    2.743638] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[    2.743641] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[    2.743644] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.743889] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.750292] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.750294] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.750296] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.830990] ACPI: AC Adapter [ADP1] (on-line)
>[    2.847615] ppdev: user-space parallel port driver
>[    2.850664] ACPI: Battery Slot [BAT0] (battery present)
>[    2.850739] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.850847] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.864084] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.864331] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[    2.864336] [drm:intel_display_power_get] enabling display
>[    2.864340] [drm:hsw_set_power_well] Enabling power well
>[    2.864378] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.871012] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
>[    2.871145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.871203] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    2.871288] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    2.871373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.871427] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[    2.871544] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
>[    2.871630] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\_PR_.IO_D) (20131218/utaddress-258)
>[    2.871716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.871769] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    2.872422] iTCO_vendor_support: vendor-support=0
>[    2.873037] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    2.873110] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.873608] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.875836] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.876066] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[    2.876241] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.877788] input: PC Speaker as /devices/platform/pcspkr/input/input9
>[    2.905997] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    2.906000] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.906003] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    2.919501] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    2.933537] Switched to clocksource tsc
>[    2.946595] dracut: Checking ext4: /dev/sda4
>[    2.946773] dracut: issuing e2fsck -a  /dev/sda4
>[    2.953291] dracut: /dev/sda4: clean, 435036/3276800 files, 10307981/13107200 blocks
>[    2.953745] dracut: Remounting /dev/sda4 with -o ro
>[    2.961098] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    2.964793] dracut: Mounted root filesystem /dev/sda4
>[    2.976682] device-mapper: uevent: version 1.0.3
>[    2.976909] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.996820] dracut: Switching root
>[    3.045069] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    3.048517] systemd[1]: Failed to insert module 'ipv6'
>[    3.048728] systemd[1]: Set hostname to <x-bdw07>.
>[    3.049783] random: systemd urandom read with 75 bits of entropy available
>[    3.066440] LVM: Logical Volume autoactivation enabled.
>[    3.066476] LVM: Activation generator successfully completed.
>[    3.105720] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    3.105808] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    3.105863] systemd[1]: Starting Syslog Socket.
>[    3.105995] systemd[1]: Listening on Syslog Socket.
>[    3.106045] systemd[1]: Starting Replay Read-Ahead Data...
>[    3.106550] systemd[1]: Starting Collect Read-Ahead Data...
>[    3.108248] systemd-readahead[2747]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    3.114247] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    3.115417] systemd-readahead[2748]: Failed to create fanotify object: Function not implemented
>[    3.125782] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    3.129489] systemd[1]: Starting Delayed Shutdown Socket.
>[    3.136950] systemd[1]: Listening on Delayed Shutdown Socket.
>[    3.140682] systemd[1]: Starting udev Kernel Socket.
>[    3.148070] systemd[1]: Listening on udev Kernel Socket.
>[    3.151761] systemd[1]: Starting udev Control Socket.
>[    3.159096] systemd[1]: Listening on udev Control Socket.
>[    3.162727] systemd[1]: Starting Encrypted Volumes.
>[    3.170016] systemd[1]: Reached target Encrypted Volumes.
>[    3.173655] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    3.181140] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    3.184817] systemd[1]: Starting Journal Socket.
>[    3.192186] systemd[1]: Listening on Journal Socket.
>[    3.195885] systemd[1]: Starting Create static device nodes in /dev...
>[    3.203572] systemd[1]: Mounting POSIX Message Queue File System...
>[    3.211280] systemd[1]: Starting udev Coldplug all Devices...
>[    3.219469] systemd[1]: Mounting Debug File System...
>[    3.227291] systemd[1]: Starting Journal Service...
>[    3.239521] systemd[1]: Started Journal Service.
>[    3.243270] systemd[1]: Mounting Huge Pages File System...
>[    3.250857] systemd[1]: Starting LVM2 metadata daemon socket.
>[    3.255715] random: nonblocking pool is initialized
>[    3.262004] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    3.265573] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    3.272790] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    3.276352] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    3.283937] systemd[1]: Expecting device dev-disk-by\x2duuid-1a1b79a3\x2d6d33\x2d48d2\x2da27e\x2d1b5805d88291.device...
>[    3.291463] systemd[1]: Mounting Temporary Directory...
>[    3.299750] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    3.303822] systemd[1]: Expecting device dev-disk-by\x2duuid-ABCD\x2d535B.device...
>[    3.311625] systemd[1]: Expecting device dev-disk-by\x2duuid-0a7e090c\x2dd2b9\x2d498e\x2dbc0d\x2d05c33717cb8c.device...
>[    3.319260] systemd[1]: Expecting device dev-disk-by\x2duuid-d79f918f\x2d693d\x2d4480\x2d91cf\x2d6840792221db.device...
>[    3.331063] systemd[1]: Started Replay Read-Ahead Data.
>[    3.334790] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    3.342451] systemd[1]: Started Collect Read-Ahead Data.
>[    3.350324] systemd[1]: Started Create static device nodes in /dev.
>[    3.358130] systemd[1]: Mounted POSIX Message Queue File System.
>[    3.365976] systemd[1]: Mounted Debug File System.
>[    3.375370] systemd[1]: Mounted Huge Pages File System.
>[    3.386056] systemd[1]: Mounted Temporary Directory.
>[    3.394876] systemd[1]: Started udev Coldplug all Devices.
>[    3.398499] systemd[1]: Starting udev Kernel Device Manager...
>[    3.406141] systemd[1]: Starting Load legacy module configuration...
>[    3.407664] systemd-udevd[3769]: starting version 204
>[    3.417131] systemd[1]: Started File System Check on Root Device.
>[    3.420651] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    3.430163] systemd[1]: Started Load Kernel Modules.
>[    3.433602] EXT4-fs (sda4): re-mounted. Opts: (null)
>[    3.433674] systemd[1]: Mounting FUSE Control File System...
>[    3.449399] systemd[1]: Mounted Configuration File System.
>[    3.454138] systemd[1]: Started Set Up Additional Binary Formats.
>[    3.457973] systemd[1]: Starting Setup Virtual Console...
>[    3.466595] systemd[1]: Starting Apply Kernel Variables...
>[    3.480609] systemd[1]: Started udev Kernel Device Manager.
>[    3.491636] systemd[1]: Mounted FUSE Control File System.
>[    3.496991] systemd[1]: Starting LVM2 metadata daemon...
>[    3.497056] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    3.497060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.497063] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[    3.533390] systemd[1]: Started Load legacy module configuration.
>[    3.543740] systemd[1]: Started Remount Root and Kernel File Systems.
>[    3.553086] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[    3.561745] systemd[1]: Started Setup Virtual Console.
>[    3.570942] systemd[1]: Started Apply Kernel Variables.
>[    3.579105] systemd[1]: Started LVM2 metadata daemon.
>[    3.579297] systemd-udevd[3776]: renamed network interface eth0 to enp0s25
>[    3.589033] systemd[1]: Starting Show Plymouth Boot Screen...
>[    3.599867] systemd[1]: Starting Local File Systems (Pre).
>[    3.609456] systemd[1]: Reached target Local File Systems (Pre).
>[    3.612895] systemd[1]: Starting Configure read-only root support...
>[    3.616698] systemd[1]: Started Import network configuration from initramfs.
>[    3.620305] systemd-udevd[3774]: renamed network interface eth1 to enp0s20u2
>[    3.621951] systemd[1]: Starting Sound Card.
>[    3.628500] systemd[1]: Reached target Sound Card.
>[    3.633658] systemd[1]: Started Configure read-only root support.
>[    3.637706] systemd[1]: Starting Load Random Seed...
>[    3.644658] systemd[1]: Started Load Random Seed.
>[    3.650046] systemd[1]: Found device INTEL_SSDSC2BB240G4.
>[    3.653351] systemd[1]: Starting File System Check on /dev/disk/by-uuid/d79f918f-693d-4480-91cf-6840792221db...
>[    3.658570] systemd[1]: Found device INTEL_SSDSC2BB240G4.
>[    3.663327] systemd[1]: Found device INTEL_SSDSC2BB240G4.
>[    3.666752] systemd[1]: Starting File System Check on /dev/disk/by-uuid/0a7e090c-d2b9-498e-bc0d-05c33717cb8c...
>[    3.678974] Adding 3964924k swap on /dev/sda3.  Priority:-1 extents:1 across:3964924k SS
>[    3.705191] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    3.712508] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.725428] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    3.736795] audit: type=1305 audit(978463258.700:2): audit_pid=3870 old=0 auid=4294967295 ses=4294967295 res=1
>[    4.561877] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.561887] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    4.888946] asix 1-2:1.0 enp0s20u2: link down
>[    4.905836] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    5.006888] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    6.552809] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0x45E1
>[    8.092452] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[    8.092456] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    8.092459] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   30.991259] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   30.991262] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   30.991265] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   31.012230] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   31.012233] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   31.012235] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   31.575149] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   31.575153] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   31.575157] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   33.598411] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   33.598414] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   33.598416] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.014266] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   34.014269] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   34.014271] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.454108] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   34.454112] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   34.454114] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[   34.475783] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0)
>[   34.475786] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   34.475788] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]

Actions: View

Attachments on bug 76711: 96497 | 96498 | 96499 | 96741 | 97114 | 97762 | 97763 | 97795 | 97934 | 97936 | 98112 | 98590 | 98651 | 98652 | 98718 | 98719 | 98720 | 98721 | 98722 | 98723

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.