Attachment 98442 Details for Bug 78269 – dmesg

dmesg

testdisplay.dmesg (text/plain), 76.59 KB, created by Guo Jinxian on 2014-05-05 03:23:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-05-05 03:23:10 UTC

Size: 76.59 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.0_drm-intel-next-queued_e5c03c_20140504+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2282 SMP Sun May 4 11:49:57 CST 2014
>[    0.000000] Disabled fast string operations
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009ebff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f3f7fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007f3f8000-0x000000007f43dfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f43e000-0x000000007f444fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007f445000-0x000000007f447fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f448000-0x000000007f46bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007f46c000-0x000000007f46cfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007f46d000-0x000000007f476fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f477000-0x000000007f497fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007f498000-0x000000007f49efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f49f000-0x000000007f5fffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-N014/MS-N014, BIOS EN014IMS.10B 11/30/2009
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7f600 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-E7FFF uncachable
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask 080000000 write-back
>[    0.000000]   1 base 07F600000 mask 0FFF00000 write-through
>[    0.000000]   2 base 07F700000 mask 0FFF00000 uncachable
>[    0.000000]   3 base 07F800000 mask 0FF800000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [mem 0x000fcac0-0x000fcacf] mapped at [c00fcac0]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x033fffff]
>[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
>[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
>[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
>[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
>[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
>[    0.000000] BRK [0x02e7f000, 0x02e7ffff] PGTABLE
>[    0.000000] ACPI: RSDP 000f0410 000024 (v03 MSI_NB)
>[    0.000000] ACPI: XSDT 7f43e080 00004C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 7f444ad0 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0x7F473F40/0x000000007F473F80, using 64-bit address (20131218/tbfadt-271)
>[    0.000000] ACPI: DSDT 7f43e158 006975 (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
>[    0.000000] ACPI: FACS 7f473f80 000040
>[    0.000000] ACPI: APIC 7f444bc8 000062 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 7f444c30 00003C (v01 A M I  ITL 945. 01072009 MSFT 00000097)
>[    0.000000] ACPI: SLIC 7f444c70 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
>[    0.000000] ACPI: HPET 7f444de8 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000003)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1150MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000] BRK [0x02e80000, 0x02e80fff] PGTABLE
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
>[    0.000000]   HighMem  [mem 0x377fe000-0x7f5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0x7f3f7fff]
>[    0.000000]   node   0: [mem 0x7f46c000-0x7f46cfff]
>[    0.000000]   node   0: [mem 0x7f49f000-0x7f5fffff]
>[    0.000000] On node 0 totalpages: 521463
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2301 pages used for memmap
>[    0.000000]   HighMem zone: 294236 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 12 pages/cpu @f67da000 s26400 r0 d22752 u49152
>[    0.000000] pcpu-alloc: s26400 r0 d22752 u49152 alloc=12*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519687
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_04/drm-intel-next-queued/e5c03ca362819ba8ffbe5674340b61b9cd75de8f/bzImage_i386 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_04/drm-intel-next-queued/e5c03ca362819ba8ffbe5674340b61b9cd75de8f/modules_i386/lib/modules/3.14.0_drm-intel-next-queued_e5c03c_20140504+
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
>[    0.000000] Initializing Movable for node 0 (00000000:00000000)
>[    0.000000] Memory: 2037220K/2085852K available (6785K kernel code, 414K rwdata, 3236K rodata, 20312K init, 384K bss, 48632K reserved, 1176944K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1a33000 - 0xc2e09000   (20312 kB)
>      .data : 0xc16a0785 - 0xc1a329c0   (3656 kB)
>      .text : 0xc1000000 - 0xc16a0785   (6785 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS:2304 nr_irqs:512 16
>[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1662.377 MHz processor
>[    0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.75 BogoMIPS (lpj=1662377)
>[    0.002312] pid_max: default: 32768 minimum: 301
>[    0.003033] ACPI: Core revision 20131218
>[    0.009190] ACPI: All ACPI Tables successfully acquired
>[    0.009488] Security Framework initialized
>[    0.009660] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.009821] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.010418] Disabled fast string operations
>[    0.010576] CPU: Physical Processor ID: 0
>[    0.010724] CPU: Processor Core ID: 0
>[    0.010873] mce: CPU supports 5 MCE banks
>[    0.011027] CPU0: Thermal monitoring enabled (TM2)
>[    0.011198] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
>tlb_flushall_shift: 6
>[    0.011787] Freeing SMP alternatives memory: 32K (c2e09000 - c2e11000)
>[    0.012115] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.012656] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.022822] smpboot: CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
>[    0.024000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
>[    0.024000] ... version:                3
>[    0.024000] ... bit width:              40
>[    0.024000] ... generic registers:      2
>[    0.024000] ... value mask:             000000ffffffffff
>[    0.024005] ... max period:             000000007fffffff
>[    0.024159] ... fixed-purpose events:   3
>[    0.024309] ... event mask:             0000000700000003
>[    0.025078] CPU 1 irqstacks, hard=f60ae000 soft=f60b4000
>[    0.025083] x86: Booting SMP configuration:
>[    0.025237] .... node  #0, CPUs:      #1
>[    0.003000] Initializing CPU#1
>[    0.003000] Disabled fast string operations
>[    0.037093] x86: Booted up 1 node, 2 CPUs
>[    0.038006] smpboot: Total of 2 processors activated (6649.50 BogoMIPS)
>[    0.039004] devtmpfs: initialized
>[    0.040019] PM: Registering ACPI NVS region [mem 0x7f3f8000-0x7f43dfff] (286720 bytes)
>[    0.040287] PM: Registering ACPI NVS region [mem 0x7f445000-0x7f447fff] (12288 bytes)
>[    0.040544] PM: Registering ACPI NVS region [mem 0x7f46d000-0x7f476fff] (40960 bytes)
>[    0.040801] PM: Registering ACPI NVS region [mem 0x7f498000-0x7f49efff] (28672 bytes)
>[    0.041213] xor: measuring software checksum speed
>[    0.050497]    pIII_sse  :  5192.000 MB/sec
>[    0.060497]    prefetch64-sse:  5728.000 MB/sec
>[    0.060651] xor: using function: prefetch64-sse (5728.000 MB/sec)
>[    0.060831] RTC time: 15:57:47, date: 05/05/14
>[    0.061096] NET: Registered protocol family 16
>[    0.062105] cpuidle: using governor ladder
>[    0.062192] cpuidle: using governor menu
>[    0.062526] ACPI: bus type PCI registered
>[    0.063145] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>[    0.063324] PCI: not using MMCONFIG
>[    0.085193] PCI: Using configuration type 1 for base access
>[    0.130162] bio: create slab <bio-0> at 0
>[    0.147116] raid6: mmxx1      382 MB/s
>[    0.164072] raid6: mmxx2      742 MB/s
>[    0.181095] raid6: sse1x1     308 MB/s
>[    0.198027] raid6: sse1x2     570 MB/s
>[    0.215061] raid6: sse2x1     613 MB/s
>[    0.232011] raid6: sse2x2    1136 MB/s
>[    0.232160] raid6: using algorithm sse2x2 (1136 MB/s)
>[    0.232313] raid6: using ssse3x1 recovery algorithm
>[    0.232509] ACPI: Added _OSI(Module Device)
>[    0.232509] ACPI: Added _OSI(Processor Device)
>[    0.232509] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.233013] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.236390] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.236958] ACPI Error: No handler for Region [EC__] (f602dae0) [EmbeddedControl] (20131218/evregion-162)
>[    0.237303] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131218/exfldio-299)
>[    0.237648] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node f602f2a0), AE_NOT_EXIST (20131218/psparse-536)
>[    0.239170] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.244649] ACPI: SSDT 7f46e918 000444 (v01    AMI      IST 00000001 MSFT 03000001)
>[    0.246372] ACPI: Dynamic OEM Table Load:
>[    0.246605] ACPI: SSDT   (null) 000444 (v01    AMI      IST 00000001 MSFT 03000001)
>[    0.248234] ACPI: Interpreter enabled
>[    0.248421] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.249031] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.249184] ACPI: Using IOAPIC for interrupt routing
>[    0.249400] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>[    0.252634] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in ACPI motherboard resources
>[    0.252903] PCI: not using MMCONFIG
>[    0.253048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.254270] ACPI: No dock devices found.
>[    0.276258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.276258] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.276401] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
>[    0.276849] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>[    0.277151] PCI host bridge to bus 0000:00
>[    0.278011] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.278170] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.278331] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.278503] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.278666] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xffffffff]
>[    0.278842] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
>[    0.279161] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
>[    0.279161] pci 0000:00:02.0: reg 0x10: [mem 0xfea80000-0xfeafffff]
>[    0.279161] pci 0000:00:02.0: reg 0x14: [io  0xf0f0-0xf0f7]
>[    0.279161] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
>[    0.279161] pci 0000:00:02.0: reg 0x1c: [mem 0xfe700000-0xfe7fffff]
>[    0.279317] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
>[    0.279317] pci 0000:00:02.1: reg 0x10: [mem 0xfea00000-0xfea7ffff]
>[    0.279317] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.279317] pci 0000:00:1b.0: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
>[    0.280089] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.280290] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.280290] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.280290] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.280561] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
>[    0.281075] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.281169] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.281451] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.281451] pci 0000:00:1d.0: reg 0x20: [io  0xf080-0xf09f]
>[    0.281451] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.281451] pci 0000:00:1d.1: reg 0x20: [io  0xf060-0xf07f]
>[    0.282159] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.282159] pci 0000:00:1d.2: reg 0x20: [io  0xf040-0xf05f]
>[    0.282326] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.282326] pci 0000:00:1d.3: reg 0x20: [io  0xf020-0xf03f]
>[    0.282326] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.282326] pci 0000:00:1d.7: reg 0x10: [mem 0xfeb05000-0xfeb053ff]
>[    0.283099] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.283310] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.283310] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.283509] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
>[    0.284225] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
>[    0.284225] pci 0000:00:1f.2: reg 0x10: [io  0xf0e0-0xf0e7]
>[    0.284225] pci 0000:00:1f.2: reg 0x14: [io  0xf0d0-0xf0d3]
>[    0.284225] pci 0000:00:1f.2: reg 0x18: [io  0xf0c0-0xf0c7]
>[    0.284225] pci 0000:00:1f.2: reg 0x1c: [io  0xf0b0-0xf0b3]
>[    0.284225] pci 0000:00:1f.2: reg 0x20: [io  0xf0a0-0xf0af]
>[    0.284225] pci 0000:00:1f.2: reg 0x24: [mem 0xfeb04000-0xfeb043ff]
>[    0.284225] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.284428] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.284428] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
>[    0.285146] pci 0000:01:00.0: [1814:3090] type 00 class 0x028000
>[    0.285146] pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe90ffff]
>[    0.287049] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.287211] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.287221] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    0.287233] pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
>[    0.287365] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
>[    0.287365] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
>[    0.287365] pci 0000:02:00.0: reg 0x18: [mem 0xe0010000-0xe0010fff 64bit pref]
>[    0.287365] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe000ffff 64bit pref]
>[    0.287365] pci 0000:02:00.0: reg 0x30: [mem 0xfe800000-0xfe81ffff pref]
>[    0.287365] pci 0000:02:00.0: supports D1 D2
>[    0.287365] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.289029] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.289190] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>[    0.289199] pci 0000:00:1c.3:   bridge window [mem 0xfe800000-0xfe8fffff]
>[    0.289211] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
>[    0.289312] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>[    0.289312] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.289312] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.289312] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.289312] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
>[    0.289324] pci_bus 0000:00: on NUMA node 0
>[    0.290389] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.291443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.292322] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>[    0.293132] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.294016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.294974] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.295906] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.296901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>[    0.297683] ACPI: Enabled 2 GPEs in block 00 to 1F
>[    0.297683] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>[    0.298084] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.299029] vgaarb: loaded
>[    0.299175] vgaarb: bridge control possible 0000:00:02.0
>[    0.299512] SCSI subsystem initialized
>[    0.300055] libata version 3.00 loaded.
>[    0.300084] ACPI: bus type USB registered
>[    0.301021] usbcore: registered new interface driver usbfs
>[    0.301213] usbcore: registered new interface driver hub
>[    0.301213] usbcore: registered new device driver usb
>[    0.302045] pps_core: LinuxPPS API ver. 1 registered
>[    0.302192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.302478] PTP clock support registered
>[    0.303061] PCI: Using ACPI for IRQ routing
>[    0.303192] PCI: pci_cache_line_size set to 64 bytes
>[    0.303262] Expanded resource reserved due to conflict with PCI Bus 0000:01
>[    0.303429] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
>[    0.303435] e820: reserve RAM buffer [mem 0x7f3f8000-0x7fffffff]
>[    0.303441] e820: reserve RAM buffer [mem 0x7f46d000-0x7fffffff]
>[    0.303446] e820: reserve RAM buffer [mem 0x7f600000-0x7fffffff]
>[    0.304081] NetLabel: Initializing
>[    0.304232] NetLabel:  domain hash size = 128
>[    0.304382] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.304572] NetLabel:  unlabeled traffic allowed by default
>[    0.304902] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.305031] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.305352] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.307035] Switched to clocksource hpet
>[    0.307438] pnp: PnP ACPI init
>[    0.307621] ACPI: bus type PNP registered
>[    0.308071] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
>[    0.308240] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.308466] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.308964] system 00:02: [io  0x0800-0x087f] could not be reserved
>[    0.309160] system 00:02: [io  0x0480-0x04bf] has been reserved
>[    0.309325] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.309490] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.309652] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.309815] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
>[    0.309977] system 00:02: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.310189] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.310228] pnp 00:03: [dma 4]
>[    0.310384] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.310640] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.310807] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.311065] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.311230] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.311419] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.311646] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>[    0.311886] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>[    0.312722] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.313119] pnp: PnP ACPI: found 11 devices
>[    0.313274] ACPI: bus type PNP unregistered
>[    0.360974] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.361223] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.361390] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
>[    0.361555] pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
>[    0.361819] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.361976] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>[    0.362165] pci 0000:00:1c.3:   bridge window [mem 0xfe800000-0xfe8fffff]
>[    0.362330] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
>[    0.362593] pci 0000:00:1e.0: PCI bridge to [bus 03]
>[    0.362761] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.362767] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.362774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.362780] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff]
>[    0.362787] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.362793] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
>[    0.362800] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff 64bit pref]
>[    0.362806] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>[    0.362813] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
>[    0.362819] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
>[    0.362826] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>[    0.362832] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>[    0.362839] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.362845] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff]
>[    0.362918] NET: Registered protocol family 2
>[    0.363400] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.363594] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.363805] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.364033] TCP: reno registered
>[    0.364190] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.364361] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.364647] NET: Registered protocol family 1
>[    0.364988] RPC: Registered named UNIX socket transport module.
>[    0.365183] RPC: Registered udp transport module.
>[    0.365336] RPC: Registered tcp transport module.
>[    0.365487] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.365661] pci 0000:00:02.0: Boot video device
>[    0.366638] PCI: CLS 64 bytes, default 64
>[    1.373578] futex hash table entries: 512 (order: 2, 16384 bytes)
>[    1.373843] audit: initializing netlink subsys (disabled)
>[    1.374044] audit: type=2000 audit(1399305468.373:1): initialized
>[    1.433950] bounce pool size: 64 pages
>[    1.434170] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    1.446472] VFS: Disk quotas dquot_6.5.2
>[    1.446864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.450795] NFS: Registering the id_resolver key type
>[    1.450969] Key type id_resolver registered
>[    1.451148] Key type id_legacy registered
>[    1.451308] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.451963] fuse init (API version 7.22)
>[    1.452728] msgmni has been set to 1680
>[    1.453862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.454160] io scheduler noop registered
>[    1.454311] io scheduler deadline registered
>[    1.454847] io scheduler cfq registered (default)
>[    1.455955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.457202] Monitor-Mwait will be used to enter C-1 state
>[    1.457226] Monitor-Mwait will be used to enter C-2 state
>[    1.457247] Monitor-Mwait will be used to enter C-3 state
>[    1.457265] tsc: Marking TSC unstable due to TSC halts in idle
>[    1.457445] ACPI: acpi_idle registered with cpuidle
>[    1.460594] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.460757] ACPI: Thermal Zone [THRM] (70 C)
>[    1.461267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.464092] Non-volatile memory driver v1.3
>[    1.464261] Linux agpgart interface v0.103
>[    1.464731] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
>[    1.465066] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>[    1.465521] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>[    1.466155] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    1.475183] brd: module loaded
>[    1.476463] Loading iSCSI transport class v2.0-870.
>[    1.478498] iscsi: registered transport (tcp)
>[    1.479186] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.479487] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.480297] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
>[    1.480866] iscsi: registered transport (qla4xxx)
>[    1.481186] QLogic iSCSI HBA Driver
>[    1.481337] Emulex LightPulse Fibre Channel SCSI driver 8.3.43
>[    1.481493] Copyright(c) 2004-2013 Emulex.  All rights reserved.
>[    1.482351] DC390: clustering now enabled by default. If you get problems load
>[    1.482607]        with "disable_clustering=1" and report to maintainers
>[    1.483063] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.483621] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
>[    1.484055] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.484346] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.484800] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.485224] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.486278] SCSI Media Changer driver v0.25 
>[    1.487606] ata_piix 0000:00:1f.2: version 2.13
>[    1.487748] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>[    1.491536] scsi0 : ata_piix
>[    1.492243] scsi1 : ata_piix
>[    1.492741] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
>[    1.492907] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
>[    1.500654] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    1.500996] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.501669] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.501830] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.502172] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.502337] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.502645] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.502804] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.503207] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.503370] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.503810] usbcore: registered new interface driver zd1201
>[    1.504116] usbcore: registered new interface driver catc
>[    1.507106] usbcore: registered new interface driver kaweth
>[    1.507265] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.507646] usbcore: registered new interface driver pegasus
>[    1.507935] usbcore: registered new interface driver rtl8150
>[    1.508280] usbcore: registered new interface driver asix
>[    1.508560] usbcore: registered new interface driver ax88179_178a
>[    1.508844] usbcore: registered new interface driver cdc_ether
>[    1.509165] usbcore: registered new interface driver dm9601
>[    1.509452] usbcore: registered new interface driver gl620a
>[    1.509734] usbcore: registered new interface driver net1080
>[    1.510042] usbcore: registered new interface driver plusb
>[    1.510327] usbcore: registered new interface driver rndis_host
>[    1.510616] usbcore: registered new interface driver cdc_subset
>[    1.510901] usbcore: registered new interface driver zaurus
>[    1.511234] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.511635] usbcore: registered new interface driver cdc_ncm
>[    1.512452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.512617] ehci-pci: EHCI PCI platform driver
>[    1.512965] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    1.513425] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    1.513705] ehci-pci 0000:00:1d.7: debug port 1
>[    1.517768] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    1.517813] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeb05000
>[    1.523071] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.523329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.523493] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.523747] usb usb1: Product: EHCI Host Controller
>[    1.523901] usb usb1: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ ehci_hcd
>[    1.524175] usb usb1: SerialNumber: 0000:00:1d.7
>[    1.524966] hub 1-0:1.0: USB hub found
>[    1.525184] hub 1-0:1.0: 8 ports detected
>[    1.526468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.526639] ohci-pci: OHCI PCI platform driver
>[    1.526931] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.527296] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.527716] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.528037] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
>[    1.528445] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.528609] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.528864] usb usb2: Product: UHCI Host Controller
>[    1.529054] usb usb2: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ uhci_hcd
>[    1.529322] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.530077] hub 2-0:1.0: USB hub found
>[    1.530274] hub 2-0:1.0: 2 ports detected
>[    1.530882] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.531350] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    1.531645] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
>[    1.532065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.532228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.532481] usb usb3: Product: UHCI Host Controller
>[    1.532635] usb usb3: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ uhci_hcd
>[    1.532895] usb usb3: SerialNumber: 0000:00:1d.1
>[    1.533677] hub 3-0:1.0: USB hub found
>[    1.533862] hub 3-0:1.0: 2 ports detected
>[    1.534535] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.534953] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    1.535308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
>[    1.535700] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.535864] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.536143] usb usb4: Product: UHCI Host Controller
>[    1.536306] usb usb4: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ uhci_hcd
>[    1.536566] usb usb4: SerialNumber: 0000:00:1d.2
>[    1.537369] hub 4-0:1.0: USB hub found
>[    1.537554] hub 4-0:1.0: 2 ports detected
>[    1.538239] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    1.538667] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    1.538987] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
>[    1.539418] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.539583] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.539838] usb usb5: Product: UHCI Host Controller
>[    1.539992] usb usb5: Manufacturer: Linux 3.14.0_drm-intel-next-queued_e5c03c_20140504+ uhci_hcd
>[    1.540292] usb usb5: SerialNumber: 0000:00:1d.3
>[    1.541080] hub 5-0:1.0: USB hub found
>[    1.541266] hub 5-0:1.0: 2 ports detected
>[    1.542307] usbcore: registered new interface driver usb-storage
>[    1.542763] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    1.566214] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.566389] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.567159] mousedev: PS/2 mouse device common for all mice
>[    1.567790] rtc_cmos 00:04: RTC can wake from S4
>[    1.568367] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.568570] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.568963] i2c /dev entries driver
>[    1.569500] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.572378] usbcore: registered new interface driver usbhid
>[    1.572539] usbhid: USB HID core driver
>[    1.572828] TCP: cubic registered
>[    1.572976] Initializing XFRM netlink socket
>[    1.573211] NET: Registered protocol family 17
>[    1.573432] Key type dns_resolver registered
>[    1.574547] Using IPI No-Shortcut mode
>[    1.575414] registered taskstats version 1
>[    1.576220] bio: create slab <bio-1> at 1
>[    1.577738] Btrfs loaded
>[    1.578539]   Magic number: 14:401:992
>[    1.579046] PM: Hibernation image not present or could not be loaded.
>[    1.579100] Warning: unable to open an initial console.
>[    1.592361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.992913] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
>[    1.993100] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    1.999577] ata1.00: configured for UDMA/133
>[    2.000002] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
>[    2.001177] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    2.001673] sd 0:0:0:0: [sda] Write Protect is off
>[    2.001834] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.001959] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.002212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.010514]  sda: sda1 sda2
>[    2.011912] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.029122] Freeing unused kernel memory: 20312K (c1a33000 - c2e09000)
>[    2.142306] dracut: dracut-018-35.git20120510.fc17
>[    2.187087] usb 4-1: new full-speed USB device number 2 using uhci_hcd
>[    2.258845] udevd[1212]: starting version 182
>[    2.317004] [drm] Initialized drm 1.1.0 20060810
>[    2.325369] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input3
>[    2.332055] ACPI: Lid Switch [LID0]
>[    2.339424] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>[    2.342759] ACPI: Power Button [PWRB]
>[    2.354181] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    2.355465] ACPI: Power Button [PWRF]
>[    2.371513] [drm:i915_dump_device_info] i915 device info: gen=3, pciid=0xa011 flags=is_mobile,is_g33,need_gfx_hws,is_pineview,has_hotplug,has_overlay,
>[    2.371689] [drm:intel_detect_pch] No PCH found.
>[    2.371702] [drm] Memory usable by graphics device = 512M
>[    2.371915] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    2.371921] [drm:i915_gem_gtt_init] GTT stolen size = 8M
>[    2.380664] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7f445018
>[    2.380691] [drm:intel_opregion_setup] Public ACPI methods supported
>[    2.380693] [drm:intel_opregion_setup] SWSCI supported
>[    2.390097] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
>[    2.390106] [drm:intel_opregion_setup] ASLE supported
>[    2.390206] i915 0000:00:02.0: irq 40 for MSI/MSI-X
>[    2.390235] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.390432] [drm] Driver supports precise vblank timestamp query.
>[    2.390594] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[    2.390601] [drm:validate_vbt] Using VBT from OpRegion: $VBT PINEVIEW       d
>[    2.390608] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.390613] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    2.390618] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    2.390624] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    2.390633] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 0 45000 1024 1072 1104 1200 600 603 609 625 0x8 0xa
>[    2.390638] [drm:parse_lfp_panel_data] VBT initial LVDS value 40300300
>[    2.390644] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0
>[    2.390649] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    2.390657] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.390662] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    2.390667] [drm:parse_driver_features] DRRS State Enabled:0
>[    2.390672] [drm:parse_mipi] No MIPI config BDB found
>[    2.390695] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    2.390712] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0x7f800000 - 0x80000000]
>[    2.390978] [drm:intel_display_power_get] enabling always-on
>[    2.391100] [drm:intel_modeset_init] 2 display pipes available.
>[    2.391127] [drm:intel_modeset_init] pipe A sprite A init failed: -19
>[    2.391152] [drm:intel_modeset_init] pipe B sprite B init failed: -19
>[    2.391162] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.421068] [drm:intel_lvds_init] using preferred mode from EDID: 
>[    2.421082] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.421097] [drm:intel_lvds_init] detected single-link lvds configuration
>[    2.421637] [drm:intel_panel_setup_backlight] failed to setup backlight for connector LVDS-1
>[    2.422099] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled
>[    2.422113] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled
>[    2.422121] [drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: enabled, pipe B
>[    2.422128] [drm:intel_modeset_readout_hw_state] [ENCODER:15:DAC-15] hw state readout: disabled, pipe A
>[    2.422135] [drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: enabled
>[    2.422141] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:VGA-1] hw state readout: disabled
>[    2.422149] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[    2.422153] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    2.422157] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    2.422163] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.422169] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.422173] [drm:intel_dump_pipe_config] requested mode:
>[    2.422180] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.422184] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.422191] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.422198] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.422202] [drm:intel_dump_pipe_config] port clock: 0
>[    2.422206] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    2.422212] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.422217] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.422221] [drm:intel_dump_pipe_config] ips: 0
>[    2.422225] [drm:intel_dump_pipe_config] double wide: 0
>[    2.422231] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B
>[    2.422235] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    2.422239] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    2.422245] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.422251] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.422255] [drm:intel_dump_pipe_config] requested mode:
>[    2.422262] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
>[    2.422266] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.422273] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    2.422280] [drm:intel_dump_crtc_timings] crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x0 flags: 0xa
>[    2.422284] [drm:intel_dump_pipe_config] port clock: 45000
>[    2.422289] [drm:intel_dump_pipe_config] pipe src size: 640x400
>[    2.422294] [drm:intel_dump_pipe_config] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
>[    2.422299] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.422303] [drm:intel_dump_pipe_config] ips: 0
>[    2.422307] [drm:intel_dump_pipe_config] double wide: 0
>[    2.422313] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[    2.422320] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[    2.422325] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[    2.422331] [drm:check_crtc_state] [CRTC:5]
>[    2.422336] [drm:check_crtc_state] [CRTC:7]
>[    2.422354] [drm:i9xx_get_plane_config] pipe/plane 1/1 with fb: size=640x400@32, offset=0, pitch 3200, size 0x139000
>[    2.422362] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 1ffff000]
>[    2.423808] [drm:init_status_page] render ring hws offset: 0x00001000
>[    2.424146] [drm] initialized overlay support
>[    2.424316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[    2.424321] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[    2.424341] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[    2.424350] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.424356] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[    2.424362] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[    2.425579] usb 4-1: New USB device found, idVendor=0db0, idProduct=3801
>[    2.425750] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.438043] [drm:intel_crt_detect] CRT not detected via hotplug
>[    2.439126] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.439132] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.439137] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.439143] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.439431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.439436] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.439440] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.439449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[    2.439455] [drm:drm_setup_crtcs] 
>[    2.439460] [drm:drm_enable_connectors] connector 8 enabled? yes
>[    2.439465] [drm:drm_enable_connectors] connector 14 enabled? no
>[    2.439471] [drm:intel_fb_initial_config] looking for cmdline mode on connector 8
>[    2.439475] [drm:intel_fb_initial_config] looking for preferred mode on connector 8
>[    2.439481] [drm:intel_fb_initial_config] connector LVDS-1 on crtc 7: 1024x600
>[    2.439485] [drm:intel_fb_initial_config] connector 14 not enabled, skipping
>[    2.439490] [drm:drm_setup_crtcs] desired mode 1024x600 set on crtc 7
>[    2.439498] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    2.444086] [drm:intelfb_create] allocated 1024x600 fb: 0x00030000, bo f5889e00
>[    2.444433] fbcon: inteldrmfb (fb0) is primary device
>[    2.446592] [drm:intel_crtc_cursor_set] cursor off
>[    2.446596] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    2.446602] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    2.446607] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    2.446610] [drm:intel_crtc_cursor_set] cursor off
>[    2.446614] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[    2.446617] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[    2.446619] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    2.446625] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.446631] [drm:drm_mode_debug_printmodeline] Modeline 16:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.446634] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[    2.446637] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    2.446642] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    2.446647] [drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[    2.446652] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[    2.446660] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[    2.446663] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe B
>[    2.446665] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    2.446667] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    2.446671] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.446674] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.446675] [drm:intel_dump_pipe_config] requested mode:
>[    2.446681] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.446683] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.446689] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    2.446694] [drm:intel_dump_crtc_timings] crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x48 flags: 0xa
>[    2.446696] [drm:intel_dump_pipe_config] port clock: 45000
>[    2.446698] [drm:intel_dump_pipe_config] pipe src size: 1024x600
>[    2.446701] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.446704] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.446706] [drm:intel_dump_pipe_config] ips: 0
>[    2.446708] [drm:intel_dump_pipe_config] double wide: 0
>[    2.711116] [drm:i9xx_pfit_disable] disabling pfit, current: 0x80002668
>[    2.711124] [drm:pineview_update_wm] Self-refresh is disabled
>[    2.711132] [drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[    2.712949] [drm:i9xx_update_primary_plane] Writing base 00030000 00000000 0 0 4096
>[    2.712955] [drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:1024x600]
>[    2.713652] [drm:intel_calculate_wm] FIFO entries required for mode: 10
>[    2.713654] [drm:intel_calculate_wm] FIFO watermark level: 492
>[    2.713657] [drm:pineview_update_wm] DSPFW1 register is f6030f0f
>[    2.713659] [drm:intel_calculate_wm] FIFO entries required for mode: 12
>[    2.713661] [drm:intel_calculate_wm] FIFO watermark level: 495
>[    2.713664] [drm:intel_calculate_wm] FIFO entries required for mode: 95
>[    2.713665] [drm:intel_calculate_wm] FIFO watermark level: 407
>[    2.713668] [drm:intel_calculate_wm] FIFO entries required for mode: 96
>[    2.713670] [drm:intel_calculate_wm] FIFO watermark level: 411
>[    2.713673] [drm:pineview_update_wm] DSPFW3 register is 3f3f0197
>[    2.713675] [drm:pineview_update_wm] Self-refresh is enabled
>[    2.728762] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 430020
>[    2.813602] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>[    3.115125] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[    3.115132] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[    3.115136] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[    3.115139] [drm:check_crtc_state] [CRTC:5]
>[    3.115143] [drm:check_crtc_state] [CRTC:7]
>[    3.115200] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[    3.115206] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    3.115209] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.122687] Console: switching to colour frame buffer device 128x37
>[    3.122698] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[    3.122702] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    3.122706] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.130893] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.131028] i915 0000:00:02.0: registered panic notifier
>[    3.137133] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.140750] acpi device:20: registered as cooling_device2
>[    3.141470] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    3.142279] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    3.156408] dracut: Starting plymouth daemon
>[    3.178881] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[    3.178890] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    3.178894] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.195907] [drm:i915_gem_open] 
>[    3.195947] [drm:intel_crtc_cursor_set] cursor off
>[    3.195953] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    3.195961] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.195968] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.195973] [drm:intel_crtc_cursor_set] cursor off
>[    3.195980] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[    3.195986] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    3.195992] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.196089] [drm:i915_gem_open] 
>[    3.196111] [drm:intel_crtc_cursor_set] cursor off
>[    3.196116] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[    3.196122] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.196128] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.196133] [drm:intel_crtc_cursor_set] cursor off
>[    3.196138] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[    3.196144] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    3.196150] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[    3.196174] [drm:i915_gem_open] 
>[    3.196342] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[    3.196351] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[    3.196369] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[    3.196376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[    3.196382] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[    3.196402] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[    3.196411] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[    3.196419] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[    3.201439] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[    3.201451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[    3.201458] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[    3.215115] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.216116] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.216123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.216128] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.216133] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.216422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.216427] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.216431] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.216438] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[    3.216452] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[    3.216457] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[    3.216463] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[    3.230111] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.231114] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.231119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.231124] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.231129] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.231415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.231420] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.231425] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.231431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[    3.596729] ACPI: AC Adapter [ADP1] (on-line)
>[    3.660738] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    3.664172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    3.664533] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
>[    3.738694] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[    3.771154] ACPI: Battery Slot [BAT1] (battery present)
>[    3.781570] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.789610] iTCO_vendor_support: vendor-support=0
>[    3.796705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    3.796779] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
>[    3.797218] r8169 0000:02:00.0 eth0: RTL8102e at 0xf86ea000, 40:61:86:1a:f7:ec, XID 04c00000 IRQ 41
>[    3.823682] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.836788] msi_laptop: Identified laptop model 'MSI N014'
>[    3.838973] wmi: Mapper loaded
>[    3.839789] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[    3.846819] msi_laptop: Brightness ignored, must be controlled by ACPI video driver
>[    3.856940] input: MSI Laptop hotkeys as /devices/virtual/input/input8
>[    3.863486] msi_laptop: driver 0.5 successfully loaded
>[    3.869059] ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x4006922d
>[    3.869068] ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1
>[    3.869075] ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x0
>[    3.869081] ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000006
>[    3.869087] ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x00000092
>[    3.869093] ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x5
>[    3.869099] ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x1
>[    3.869105] ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0
>[    3.869111] ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1
>[    3.869401] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
>[    3.869409] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    3.869414] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    3.869419] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    3.869423] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    3.869429] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x19
>[    3.869435] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[    3.869441] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x4006922d for NID 0x1d
>[    3.869447] ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0x922d CODEC_ID=10ec0662
>[    4.122864] random: nonblocking pool is initialized
>[    4.188893] dracut: Checking ext4: /dev/sda2
>[    4.193517] dracut: issuing e2fsck -a  /dev/sda2
>[    4.361448] dracut: /dev/sda2: clean, 785956/9641984 files, 17331680/38558720 blocks
>[    4.367109] dracut: Remounting /dev/sda2 with -o ro
>[    4.391997] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.508567] dracut: Mounted root filesystem /dev/sda2
>[    4.683992] device-mapper: uevent: version 1.0.3
>[    4.689197] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    4.825384] dracut: Switching root
>[    5.736676] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    5.908160] systemd[1]: Failed to insert module 'ipv6'
>[    5.978266] systemd[1]: Set hostname to <x-pnv2>.
>[    6.387426] LVM: Logical Volume autoactivation enabled.
>[    6.391165] LVM: Activation generator successfully completed.
>[    7.592773] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    7.596683] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    7.600455] systemd[1]: Starting Syslog Socket.
>[    7.604375] systemd[1]: Listening on Syslog Socket.
>[    7.604509] systemd[1]: Starting Replay Read-Ahead Data...
>[    7.613519] systemd[1]: Starting Collect Read-Ahead Data...
>[    7.622284] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    7.632268] systemd-readahead[2268]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    7.635071] systemd-readahead[2269]: Failed to create fanotify object: Function not implemented
>[    7.635502] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    7.635566] systemd[1]: Starting Delayed Shutdown Socket.
>[    7.654749] systemd[1]: Listening on Delayed Shutdown Socket.
>[    7.654822] systemd[1]: Starting Encrypted Volumes.
>[    7.663198] systemd[1]: Reached target Encrypted Volumes.
>[    7.663476] systemd[1]: Starting udev Kernel Socket.
>[    7.674685] systemd[1]: Listening on udev Kernel Socket.
>[    7.674926] systemd[1]: Starting udev Control Socket.
>[    7.683259] systemd[1]: Listening on udev Control Socket.
>[    7.683402] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    7.691195] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    7.691292] systemd[1]: Starting Journal Socket.
>[    7.702520] systemd[1]: Listening on Journal Socket.
>[    7.702664] systemd[1]: Mounting Huge Pages File System...
>[    7.711047] systemd[1]: Mounting Debug File System...
>[    7.719141] systemd[1]: Starting Create static device nodes in /dev...
>[    7.727602] systemd[1]: Starting udev Coldplug all Devices...
>[    7.736208] systemd[1]: Starting Journal Service...
>[    7.748097] systemd[1]: Started Journal Service.
>[    7.749234] systemd[1]: Mounting POSIX Message Queue File System...
>[    7.761435] systemd[1]: Starting LVM2 metadata daemon socket.
>[    7.768534] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    7.768616] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    7.779876] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    7.779952] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    7.792100] systemd[1]: Expecting device dev-disk-by\x2duuid-7096f098\x2daaba\x2d44e6\x2db8f0\x2dbc6243220e51.device...
>[    7.799137] systemd[1]: Mounting Temporary Directory...
>[    8.109870] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    8.116776] systemd[1]: Started Replay Read-Ahead Data.
>[    8.121863] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    8.129749] systemd[1]: Started Collect Read-Ahead Data.
>[    8.130678] systemd[1]: Starting Load legacy module configuration...
>[    8.143192] systemd[1]: Started File System Check on Root Device.
>[    8.143331] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    8.468308] systemd[1]: Starting Apply Kernel Variables...
>[    8.473937] systemd[1]: Starting Setup Virtual Console...
>[    8.906967] systemd[1]: Started Load Kernel Modules.
>[    8.911206] systemd[1]: Mounting FUSE Control File System...
>[    8.916680] systemd[1]: Mounted Configuration File System.
>[    9.331485] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    9.548509] systemd[1]: Started Set Up Additional Binary Formats.
>[    9.553926] systemd[1]: Mounted Temporary Directory.
>[    9.562676] systemd[1]: Mounted Debug File System.
>[    9.580753] systemd[1]: Mounted FUSE Control File System.
>[    9.585336] systemd[1]: Mounted Huge Pages File System.
>[    9.596589] systemd[1]: Mounted POSIX Message Queue File System.
>[    9.605627] systemd[1]: Started Create static device nodes in /dev.
>[    9.615828] systemd[1]: Started Remount Root and Kernel File Systems.
>[    9.624742] systemd[1]: Started Apply Kernel Variables.
>[    9.631183] systemd[1]: Started Import network configuration from initramfs.
>[    9.631298] systemd[1]: Starting Configure read-only root support...
>[    9.647586] systemd[1]: Starting udev Kernel Device Manager...
>[    9.658086] systemd[1]: Starting LVM2 metadata daemon...
>[    9.777554] systemd-udevd[2676]: starting version 204
>[   11.049831] audit: type=1305 audit(1399305478.048:2): audit_pid=3076 old=0 auid=4294967295 ses=4294967295 res=1
>[   14.112184] systemd-udevd[3097]: renamed network interface p1p1 to enp2s0
>[   15.702993] Adding 2047996k swap on /dev/sda1.  Priority:-1 extents:1 across:2047996k 
>[   21.598267] r8169 0000:02:00.0 enp2s0: link down
>[   21.600646] r8169 0000:02:00.0 enp2s0: link down
>[   23.176122] r8169 0000:02:00.0 enp2s0: link up
>[   26.879619] [drm:intel_crtc_cursor_set] cursor off
>[   26.879632] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   26.879645] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   26.879655] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   26.879663] [drm:intel_crtc_cursor_set] cursor off
>[   26.879673] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[   26.879683] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   26.879692] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   27.040798] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[   27.040807] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   27.040814] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   65.243589] [drm:i915_gem_open] 
>[   65.243631] [drm:intel_crtc_cursor_set] cursor off
>[   65.243638] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   65.243646] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   65.243653] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   65.243658] [drm:intel_crtc_cursor_set] cursor off
>[   65.243665] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[   65.243672] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   65.243678] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   65.243699] [drm:i915_gem_open] 
>[   65.243996] [drm:i915_gem_open] 
>[   65.245134] [drm:i915_gem_open] 
>[   65.246315] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   65.246341] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   65.246374] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   65.246383] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   65.246394] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   65.246402] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1]
>[   65.246408] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1]
>[   65.246428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes :
>[   65.246438] [drm:drm_mode_debug_printmodeline] Modeline 11:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[   65.246446] [drm:drm_mode_getconnector] [CONNECTOR:8:?]
>[   65.246468] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   65.246476] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   65.246526] [drm:drm_mode_addfb2] [FB:18]
>[   66.121306] [drm:drm_mode_setcrtc] [CRTC:7]
>[   66.121327] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1]
>[   66.121336] [drm:intel_crtc_set_config] [CRTC:7] [FB:18] #connectors=1 (x y) (0 0)
>[   66.121346] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=1
>[   66.121355] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   66.121434] [drm:i9xx_update_primary_plane] Writing base 00290000 00000000 0 0 4096
>[   71.123295] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[   71.123307] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[   71.123313] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [NOCRTC]
>[   71.123318] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   71.123322] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   71.123327] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   71.123334] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[   71.413120] [drm:pineview_update_wm] Self-refresh is disabled
>[   71.413139] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[   71.413145] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   71.413151] [drm:check_crtc_state] [CRTC:5]
>[   71.413156] [drm:check_crtc_state] [CRTC:7]
>[   71.413199] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   71.413211] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
>[   71.413221] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   71.413229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   71.413235] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   71.427112] [drm:intel_crt_detect] CRT not detected via hotplug
>[   71.428201] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   71.428211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   71.428218] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   71.428226] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   71.428535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   71.428545] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   71.428551] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   71.428562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   71.428585] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   71.428594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1]
>[   71.428602] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   71.442119] [drm:intel_crt_detect] CRT not detected via hotplug
>[   71.443245] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   71.443255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   71.443262] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   71.443269] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   71.443576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   71.443585] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   71.443592] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   71.443602] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected
>[   71.443840] [drm:intel_crtc_cursor_set] cursor off
>[   71.443845] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   71.443853] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   71.443858] [drm:intel_crtc_cursor_set] cursor off
>[   71.443863] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[   71.443867] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   71.443873] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[   71.443875] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   71.443881] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   71.443884] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   71.443887] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   71.443894] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[   71.443903] [drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains
>[   71.443909] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[   71.443919] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   71.443923] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe B
>[   71.443926] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   71.443929] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   71.443934] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   71.443939] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   71.443941] [drm:intel_dump_pipe_config] requested mode:
>[   71.443949] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[   71.443951] [drm:intel_dump_pipe_config] adjusted mode:
>[   71.443958] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa
>[   71.443968] [drm:intel_dump_crtc_timings] crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x48 flags: 0xa
>[   71.443971] [drm:intel_dump_pipe_config] port clock: 45000
>[   71.443974] [drm:intel_dump_pipe_config] pipe src size: 1024x600
>[   71.443978] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   71.443982] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   71.443985] [drm:intel_dump_pipe_config] ips: 0
>[   71.443987] [drm:intel_dump_pipe_config] double wide: 0
>[   71.443997] [drm:i9xx_get_refclk] using SSC reference clock of 100000 kHz
>[   71.447157] [drm:i9xx_update_primary_plane] Writing base 00030000 00000000 0 0 4096
>[   71.447168] [drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:1024x600]
>[   71.447893] [drm:intel_calculate_wm] FIFO entries required for mode: 10
>[   71.447897] [drm:intel_calculate_wm] FIFO watermark level: 492
>[   71.447901] [drm:pineview_update_wm] DSPFW1 register is f6030f0f
>[   71.447904] [drm:intel_calculate_wm] FIFO entries required for mode: 12
>[   71.447907] [drm:intel_calculate_wm] FIFO watermark level: 495
>[   71.447911] [drm:intel_calculate_wm] FIFO entries required for mode: 95
>[   71.447914] [drm:intel_calculate_wm] FIFO watermark level: 407
>[   71.447918] [drm:intel_calculate_wm] FIFO entries required for mode: 96
>[   71.447921] [drm:intel_calculate_wm] FIFO watermark level: 411
>[   71.447925] [drm:pineview_update_wm] DSPFW3 register is 3f3f0197
>[   71.447928] [drm:pineview_update_wm] Self-refresh is enabled
>[   71.825126] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1]
>[   71.825133] [drm:check_encoder_state] [ENCODER:9:LVDS-9]
>[   71.825136] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   71.825141] [drm:check_crtc_state] [CRTC:5]
>[   71.825144] [drm:check_crtc_state] [CRTC:7]
>[   71.835742] [drm:intel_crtc_cursor_set] cursor off
>[   71.835751] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[   71.835759] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   71.835766] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[   71.835772] [drm:intel_crtc_cursor_set] cursor off
>[   71.835778] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[   71.835786] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   71.835791] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[  104.598990] [drm:i915_gem_open] 
>[  104.599266] [drm:intel_crtc_cursor_set] cursor off
>[  104.599277] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
>[  104.599287] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  104.599297] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[  104.599305] [drm:intel_crtc_cursor_set] cursor off
>[  104.599315] [drm:intel_crtc_set_config] [CRTC:7] [FB:17] #connectors=1 (x y) (0 0)
>[  104.599324] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[  104.599333] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:7]
>[  104.599374] [drm:i915_gem_open] 
>[  104.599773] [drm:i915_gem_open] 
>[  104.599812] [drm:i915_gem_open]

Actions: View

Attachments on bug 78269: 98442

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.