Bug 108529

This also got hit in the same way in https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1981/issues.html

Also seen in https://patchwork.freedesktop.org/series/51215/ and https://patchwork.freedesktop.org/series/51258/

Please attach /sys/kernel/debug/dri/0/i915_vbt from the failing device.

Created attachment 142272 [details]
BIOS(VBT) information from failed machine.

Swati tested LSPCON probing on Bangalore APL system, where:
 	- LSPCON HW is on port B,
 	- VBT was bad, and was showing LSPCON on all ports A, B C
 	- On Port B, the probe was successful, but probe was failure on port 
 A and C (as there was no LSPCON)
 
 - On FI-CI Build APL system:
 	- the VBT seems showing LSPCON only on Port B
 	- but we are seeing a failure during the probe itself, even on LSPCON port
 
 So technically, Swati is not able to reproduce this issue yet (as the 
 probe failures were on non-LSPCON ports A and C, due to wrong VBT 
 reports)
 
 Next steps for debug:
 Lakshmi: Can you please share the BIOS(VBT) which is being flashed 
 on CI- APL system where the failure has been observed ?
 
 Swati: Please flash this BIOS(VBT) on Bangalore APL system, and see 
 if you are able to reproduce this issue.
 	- If yes: Lets debug this issue further and root cause.
 	- If no: We might need to get access to CI-APL system, for root causing.

Created attachment 142273 [details]
BIOS VBT file

Adding KBL platform based on the latest results.

In the boot log of https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_5021/fi-apl-guc/boot0.log, it can be seen
<7>[    6.938880] [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 0.0

DPCD version is read incorrectly, after that lspcon probe error comes. 

Failure of following i-g-t subtests has this thing common:
kms_pipe_crc_basic@suspend-read-crc-pipe-a
igt@drv_module_reload@basic-reload
igt@drv_module_reload@basic-reload-inject
igt@pm_rpm@module-reload

The same thing is happening for APL and KBL.

KBL NUC on which I am trying to reproduce this issue, DPCD version is read correctly and probe failure is not observed.

Swati, how to proceed further?

Last seen this issue CI_DRM_5629 (11 hours, 1 minute / 5 runs ago).
https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_5629/fi-kbl-7567u/igt@pm_rpm@module-reload.html

A CI Bug Log filter associated to this bug has been updated:

{- LSPCON fi-apl-guc fi-kbl-7567u: igt@drv_module_reload@basic-reload(-inject)? igt@pm_rpm@module-reload - dmesg-warn - *ERROR* Failed to probe lspcon -}
{+ LSPCON fi-apl-guc fi-kbl-7567u: igt@drv_module_reload@basic-reload(-inject)? igt@pm_rpm@module-reload - dmesg-warn - *ERROR* Failed to probe lspcon +}

 No new failures caught with the new filter

A CI Bug Log filter associated to this bug has been updated:

{- LSPCON fi-apl-guc fi-kbl-7567u: igt@drv_module_reload@basic-reload(-inject)? igt@pm_rpm@module-reload - dmesg-warn - *ERROR* Failed to probe lspcon -}
{+ LSPCON fi-apl-guc SKL fi-kbl-7567u: igt@drv_module_reload@basic-reload(-inject)? igt@pm_rpm@module-reload -dmesg-warn - *ERROR* Failed to probe lspcon +}

 No new failures caught with the new filter

SKL is added to this bug as there is a failure from pre-merge testing.

https://patchwork.freedesktop.org/series/57037/#rev1

https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12276/fi-skl-6770hq/igt@i915_module_load@reload-with-fault-injection.html

<4> [327.445661] drm_dp_i2c_do_msg: 2 callbacks suppressed
<3> [327.543286] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [327.543340] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<3> [328.252606] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [328.252661] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<3> [329.682570] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [329.682643] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<3> [331.082274] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [331.082329] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<4> [332.446796] drm_dp_i2c_do_msg: 48 callbacks suppressed
<3> [332.455316] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [332.455374] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<3> [333.853294] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [333.853351] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<3> [335.249472] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [335.249529] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<3> [336.649781] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [336.649886] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
<4> [337.953550] drm_dp_i2c_do_msg: 28 callbacks suppressed
<3> [338.051282] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
<3> [338.051339] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B

The CI Bug Log issue associated to this bug has been updated.

### New filters associated

* SKL: igt@i915_module_load@reload-with-fault-injection - dmesg-warn -  Too many retries, giving up. First error: -110 (No new failures associated)

A CI Bug Log filter associated to this bug has been updated:

{- SKL: igt@i915_module_load@reload-with-fault-injection - dmesg-warn -  Too many retries, giving up. First error: -110 -}
{+ SKL: igt@i915_module_load@reload-with-fault-injection - dmesg-warn -  Too many retries, giving up. First error: -110 +}

 No new failures caught with the new filter

Swati was unable to reproduce this issue locally. Needs further investigation.
Dropping the priority to high as the issue not seen locally and occurs only on one machine.

Lakshmi, can you please check if this error is seen in CI with latest FW 1.75.01 or not. If not change state to resolved?

(In reply to Swati Sharma from comment #17)
> Lakshmi, can you please check if this error is seen in CI with latest FW
> 1.75.01 or not. If not change state to resolved?

Should we close this?

(In reply to Swati Sharma from comment #18)
> (In reply to Swati Sharma from comment #17)
> > Lakshmi, can you please check if this error is seen in CI with latest FW
> > 1.75.01 or not. If not change state to resolved?
> 
> Should we close this?

Sorry for the delay. This issue used to occur once in 1-56 runs. Last seen on CI_DRM_5870, so we can close this issue if there is no new failures till CI_DRM_6430.

Dropping the priority to Medium as last seen 1 month ago.

@lakshmi, should we close this issue?

Last seen CI_DRM_5870 (3 months, 2 weeks old). Till then, this issue used to occur on once in 6 BAT runs. Current run is CI_DRM_6537.
Closing this issue as WORKSFORME.

The CI Bug Log issue associated to this bug has been archived.

New failures matching the above filters will not be associated to this bug anymore.