Bug 70162

Summary: K8M890CE/K8N890CE [Chrome 9] [1106:3230] not detected
Product: DRI Reporter: Paul Menzel <paulepanter>
Component: DRM/ViaAssignee: Openchrome development list <openchrome-devel>
Status: CLOSED INVALID QA Contact:
Severity: normal    
Priority: medium CC: paulepanter, xavier
Version: XOrg git   
Hardware: Other   
OS: All   
Whiteboard:
i915 platform: i915 features:

Description Paul Menzel 2013-10-05 09:51:10 UTC
Using an ASUS M2V-MX SE board with K8M890CE/K8N890CE [Chrome 9], starting Debian Wheezy with Linux 3.10 from Debian Backports, an SSD and sytemd 44-11, the system hangs after reaching the login console and the text on the screen suddenly is garbled and nothing is shown on serial console and I am not able to enter anything.

With a slower system (hard drive, SysV init sytem, Debian Sid/unstable, Linux 3.10-3-686-pae) the system freezes earlier but with the same kind of text corruption.

Looking through the Linux kernel output and comparing it with the Troubleshooting Wiki page [1], it might be during loading the DRM(?) module.

Please find everything pasted below.

[1] http://www.freedesktop.org/wiki/Openchrome/Troubleshooting/

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:0336]
	Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge [1106:0336]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Region 0: Memory at <ignored> (32-bit, prefetchable)
	Capabilities: <access denied>
	Kernel driver in use: agpgart-amd64

00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:1336]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes

00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:2336]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes

00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:3336]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes

00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:4336]
	Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes

00:00.5 PIC [0800]: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller [1106:5336] (prog-if 20 [IO(X)-APIC])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes

00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:7336]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fa000000-fbefffff
	Prefetchable memory behind bridge: d0000000-dfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:02.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:a238] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 80000000-801fffff
	Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:c238] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 80400000-805fffff
	Prefetchable memory behind bridge: 0000000080600000-00000000807fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0f.0 IDE interface [0101]: VIA Technologies, Inc. Device [1106:5372] (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin B routed to IRQ 21
	Region 0: I/O ports at ec00 [size=8]
	Region 1: I/O ports at e880 [size=4]
	Region 2: I/O ports at e800 [size=8]
	Region 3: I/O ports at e480 [size=4]
	Region 4: I/O ports at e400 [size=16]
	Region 5: I/O ports at e000 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sata_via

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at fc00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_via

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at d480 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 22
	Region 4: I/O ports at d800 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at d880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 23
	Region 4: I/O ports at dc00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 21
	Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237S PCI to ISA Bridge [1106:3372]
	Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e]
	Subsystem: VIA Technologies, Inc. Device [1106:337e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 128
	Capabilities: <access denied>

00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 7c)
	Subsystem: ASUSTeK Computer Inc. A7V600-X Motherboard [1043:80ed]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at d000 [size=256]
	Region 1: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: via-rhine

00:13.0 Host bridge [0600]: VIA Technologies, Inc. VT8237A Host Bridge [1106:337b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge [1106:337a] (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: amd64_edac

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at fbef0000 [disabled] [size=64K]
	Capabilities: <access denied>

20:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8290]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

Loading Linux 3.10-0.bpo.2-686-pae ...
Loading initial ramdisk ...
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10-0.bpo.2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.10.5-1~bpo70+1 (2013-08-11)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e9c20-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000037fbe000-0x0000000037fdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000037fe0000-0x0000000037ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000] RAMDISK: [mem 0x368ca000-0x3745cfff]
[    0.000000] ACPI: RSDP 000fa8b0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 37fb0100 0005C (v01 103007 XSDT1341 20071030 MSFT 00000097)
[    0.000000] ACPI: FACP 37fb0290 000F4 (v03 103007 FACP1341 20071030 MSFT 00000097)
[    0.000000] ACPI: DSDT 37fb0490 0547E (v01  A0692 A0692000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 37fbe000 00040
[    0.000000] ACPI: APIC 37fb0390 00068 (v01 103007 APIC1341 20071030 MSFT 00000097)
[    0.000000] ACPI: MCFG 37fb0400 0003C (v01 103007 OEMMCFG  20071030 MSFT 00000097)
[    0.000000] ACPI: WDRT 37fb0440 00047 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[    0.000000] ACPI: OEMB 37fbe040 00075 (v01 103007 OEMB1341 20071030 MSFT 00000097)
[    0.000000] ACPI: HPET 37fb5910 00038 (v01 103007 VT-8237S 20071030 MSFT 00000097)
[    0.000000] ACPI: SSDT 37fb5950 000D3 (v01 A_M_I_ POWERNOW 00000001 AMD  00000001)
[    0.000000] 5MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x37faffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009afff]
[    0.000000]   node   0: [mem 0x00100000-0x37faffff]
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[    0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[    0.000000] e820: [mem 0x38000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79dc000 s34560 r0 d22784 u57344
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227414
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-0.bpo.2-686-pae root=/dev/mapper/sda2crypt ro console=ttyS0,115200n8 console=tty0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:00037fb0)
[    0.000000] Memory: 891000k/917184k available (3085k kernel code, 25776k reserved, 1572k data, 460k init, 5832k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd34000 - 0xfffff000   (2860 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc148d000 - 0xc1500000   ( 460 kB)
[    0.000000]       .data : 0xc130357c - 0xc148c800   (1572 kB)
[    0.000000]       .text : 0xc1000000 - 0xc130357c   (3085 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1801.010 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3602.02 BogoMIPS (lpj=7204040)
[    0.018851] pid_max: default: 32768 minimum: 301
[    0.020059] Security Framework initialized
[    0.024007] AppArmor: AppArmor disabled by boot time parameter
[    0.028003] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.032028] Mount-cache hash table entries: 512
[    0.036289] Initializing cgroup subsys memory
[    0.040026] Initializing cgroup subsys devices
[    0.044004] Initializing cgroup subsys freezer
[    0.048004] Initializing cgroup subsys net_cls
[    0.052004] Initializing cgroup subsys blkio
[    0.056004] Initializing cgroup subsys perf_event
[    0.060049] mce: CPU supports 5 MCE banks
[    0.064010] LVT offset 0 assigned for vector 0xf9
[    0.068006] process: using AMD E400 aware idle routine
[    0.072012] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.072012] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.072012] tlb_flushall_shift: 4
[    0.080193] ACPI: Core revision 20130328
[    0.087173] ACPI: All ACPI Tables successfully acquired
[    0.096116] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.100527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.143938] smpboot: CPU0: AMD Sempron(tm) Processor 3200+ (fam: 0f, model: 4f, stepping: 02)
[    0.156000] Performance Events: AMD PMU driver.
[    0.156004] ... version:                0
[    0.160001] ... bit width:              48
[    0.164001] ... generic registers:      4
[    0.168001] ... value mask:             0000ffffffffffff
[    0.172001] ... max period:             00007fffffffffff
[    0.176001] ... fixed-purpose events:   0
[    0.180001] ... event mask:             000000000000000f
[    0.184320] Brought up 1 CPUs
[    0.188008] smpboot: Total of 1 processors activated (3602.02 BogoMIPS)
[    0.192085] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.196426] devtmpfs: initialized
[    0.200347] PM: Registering ACPI NVS region [mem 0x37fbe000-0x37fdffff] (139264 bytes)
[    0.204253] regulator-dummy: no parameters
[    0.208091] NET: Registered protocol family 16
[    0.212146] TOM: 0000000040000000 aka 1024M
[    0.216068] ACPI: bus type PCI registered
[    0.220003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.224080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.228003] PCI: not using MMCONFIG
[    0.232744] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.236087] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.240001] PCI: Using configuration type 1 for base access
[    0.244964] bio: create slab <bio-0> at 0
[    0.248135] ACPI: Added _OSI(Module Device)
[    0.252008] ACPI: Added _OSI(Processor Device)
[    0.256002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.260002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.266972] ACPI: Executed 1 blocks of module-level executable AML code
[    0.277894] ACPI: Interpreter enabled
[    0.280022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.290252] ACPI: (supports S0 S1 S3 S4 S5)
[    0.292002] ACPI: Using IOAPIC for interrupt routing
[    0.296032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.301744] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.304002] PCI: Using MMCONFIG for extended config space
[    0.308026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.312123] ACPI: No dock devices found.
[    0.329847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
[    0.332399] PCI host bridge to bus 0000:00
[    0.336007] pci_bus 0000:00: root bus resource [bus 00-1f]
[    0.340004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.344003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.348004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.352003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.356003] pci_bus 0000:00: root bus resource [mem 0x38000000-0xdfffffff]
[    0.360003] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbefffff]
[    0.368369] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.372172] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.380018] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.384172] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.388186] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.392475] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.400655] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.404099] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.408085] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.416004] pci 0000:00:13.1: PCI bridge to [bus 04] (subtractive decode)
[    0.420057] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.424003] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.432396] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.440069] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.448068] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.456067] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.463318] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.468314] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.478127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.487410] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.495191] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-ff])
[    0.496296] PCI host bridge to bus 0000:20
[    0.500006] pci_bus 0000:20: root bus resource [bus 20-ff]
[    0.504004] pci_bus 0000:20: root bus resource [mem 0xfbf00000-0xfbffffff]
[    0.508140] pci 0000:20:01.0: System wakeup disabled by ACPI
[    0.512088] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.516003] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.520495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.524007] vgaarb: loaded
[    0.526764] vgaarb: bridge control possible 0000:01:00.0
[    0.528083] PCI: Using ACPI for IRQ routing
[    0.532276] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.536009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.541120] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.546095] Switching to clocksource hpet
[    0.550108] pnp: PnP ACPI init
[    0.553270] ACPI: bus type PNP registered
[    0.558950] system 00:04: [io  0x03e0-0x03e7] has been reserved
[    0.564951] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.570931] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.576910] system 00:04: [io  0x0400-0x041f] has been reserved
[    0.582893] system 00:04: [mem 0xfecc0000-0xfecc0fff] could not be reserved
[    0.589911] system 00:04: [mem 0xfed02000-0xfed02fff] has been reserved
[    0.597143] system 00:08: [io  0x0c00-0x0c0f] has been reserved
[    0.603140] system 00:08: [io  0x0d00-0x0d0f] has been reserved
[    0.609118] system 00:08: [io  0x0a20-0x0a2f] has been reserved
[    0.615096] system 00:08: [io  0x0a30-0x0a3f] has been reserved
[    0.622219] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.629255] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.635925] system 00:0a: [mem 0x38000000-0x3fffffff] has been reserved
[    0.642696] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.649765] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.656794] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.663815] system 00:0c: [mem 0x00100000-0x37ffffff] could not be reserved
[    0.670835] system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.678083] pnp: PnP ACPI: found 13 devices
[    0.682326] ACPI: bus type PNP unregistered
[    0.686565] PnPBIOS: Disabled by ACPI PNP
[    0.727509] pci 0000:00:02.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[    0.734445] pci 0000:00:02.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[    0.742347] pci 0000:00:03.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[    0.749279] pci 0000:00:03.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[    0.757176] pci 0000:00:02.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.763416] pci 0000:00:03.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.769656] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.774686] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbefffff]
[    0.781530] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.788820] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.793843] pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
[    0.800000] pci 0000:00:02.0:   bridge window [mem 0x40000000-0x401fffff]
[    0.806847] pci 0000:00:02.0:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
[    0.814657] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.819680] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.825836] pci 0000:00:03.0:   bridge window [mem 0x40400000-0x405fffff]
[    0.832683] pci 0000:00:03.0:   bridge window [mem 0x40600000-0x407fffff 64bit pref]
[    0.840494] pci 0000:00:13.1: PCI bridge to [bus 04]
[    0.845537] pci 0000:00:02.0: enabling device (0104 -> 0107)
[    0.851368] pci 0000:00:03.0: enabling device (0104 -> 0107)
[    0.857280] NET: Registered protocol family 2
[    0.861911] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.869070] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.875617] TCP: Hash tables configured (established 8192 bind 8192)
[    0.882103] TCP: reno registered
[    0.885396] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.891385] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.897905] NET: Registered protocol family 1
[    0.902409] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.908319] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.914127] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.921808] Unpacking initramfs...
[    1.342682] Freeing initrd memory: 11852k freed
[    1.358361] audit: initializing netlink socket (disabled)
[    1.363858] type=2000 audit(1380961638.360:1): initialized
[    1.389848] bounce pool size: 64 pages
[    1.394087] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.400764] VFS: Disk quotas dquot_6.5.2
[    1.404798] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.411515] msgmni has been set to 1751
[    1.415682] alg: No test for stdrng (krng)
[    1.419901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.427410] io scheduler noop registered
[    1.431403] io scheduler deadline registered
[    1.435748] io scheduler cfq registered (default)
[    1.440807] ioapic: probe of 0000:00:00.5 failed with error -22
[    1.446810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.452479] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.459305] GHES: HEST is not enabled!
[    1.463131] isapnp: Scanning for PnP cards...
[    1.821497] isapnp: No Plug & Play device found
[    1.826175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.852910] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.859245] Linux agpgart interface v0.103
[    1.863545] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    1.874167] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xc8000000
[    1.881278] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.888574] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.893612] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.898865] mousedev: PS/2 mouse device common for all mice
[    1.904593] rtc_cmos 00:07: RTC can wake from S4
[    1.909492] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.915687] rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.923356] cpuidle: using governor ladder
[    1.927515] cpuidle: using governor menu
[    1.931536] drop_monitor: Initializing network drop monitor service
[    1.938068] TCP: cubic registered
[    1.941462] NET: Registered protocol family 10
[    1.946200] mip6: Mobile IPv6
[    1.949242] NET: Registered protocol family 17
[    1.953954] Using IPI No-Shortcut mode
[    1.957896] registered taskstats version 1
[    1.962637] rtc_cmos 00:07: setting system clock to 2013-10-05 08:27:20 UTC (1380961640)
[    1.971064] Freeing unused kernel memory: 460k freed
[    1.976566] Write protecting the kernel text: 3088k
[    1.981556] Write protecting the kernel read-only data: 1240k
[    1.987359] NX-protecting the kernel data: 3056k
[    2.064272] udevd[54]: starting version 175
[    2.171835] SCSI subsystem initialized
[    2.183705] ACPI: bus type ATA registered
[    2.248239] ACPI: bus type USB registered
[    2.275987] sata_via 0000:00:0f.0: routed to hard irq line 5
[    2.292718] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    2.304579] usbcore: registered new interface driver usbfs
[    2.315893] scsi0 : sata_via
[    2.330789] scsi1 : sata_via
[    2.336212] usbcore: registered new interface driver hub
[    2.347337] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 21
[    2.354568] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 21
[    2.372203] usbcore: registered new device driver usb
[    2.394652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.401895] uhci_hcd: USB Universal Host Controller Interface driver
[    2.410142] scsi2 : pata_via
[    2.415492] scsi3 : pata_via
[    2.425576] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    2.432634] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    2.441360] ehci-pci: EHCI PCI platform driver
[    2.446724] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1d000, 00:1e:8c:b9:4b:2a, IRQ 23
[    2.455956] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7949 advertising 0de1 Link 0000
[    2.466299] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.473131] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    2.480956] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480
[    2.486873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.493725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.504883] usb usb1: Product: UHCI Host Controller
[    2.509821] usb usb1: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[    2.516494] usb usb1: SerialNumber: 0000:00:10.0
[    2.521517] hub 1-0:1.0: USB hub found
[    2.525364] hub 1-0:1.0: 2 ports detected
[    2.529832] ehci-pci 0000:00:10.4: EHCI Host Controller
[    2.535251] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[    2.542735] ehci-pci 0000:00:10.4: debug port 1
[    2.547365] ehci-pci 0000:00:10.4: irq 21, io mem 0xf9fffc00
[    2.564028] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[    2.570331] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.576177] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.583026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.590313] usb usb2: Product: EHCI Host Controller
[    2.595257] usb usb2: Manufacturer: Linux 3.10-0.bpo.2-686-pae ehci_hcd
[    2.601927] usb usb2: SerialNumber: 0000:00:10.4
[    2.607312] hub 2-0:1.0: USB hub found
[    2.611176] hub 2-0:1.0: 8 ports detected
[    2.636278] hub 1-0:1.0: USB hub found
[    2.640128] hub 1-0:1.0: 2 ports detected
[    2.644562] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.656092] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.664342] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800
[    2.670277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.677150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.684451] usb usb3: Product: UHCI Host Controller
[    2.689397] usb usb3: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[    2.696070] usb usb3: SerialNumber: 0000:00:10.1
[    2.701353] hub 3-0:1.0: USB hub found
[    2.705201] hub 3-0:1.0: 2 ports detected
[    2.709702] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.715080] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.722604] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880
[    2.728636] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.735485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.742773] usb usb4: Product: UHCI Host Controller
[    2.747713] usb usb4: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[    2.754385] usb usb4: SerialNumber: 0000:00:10.2
[    2.759369] ata1.00: ATA-8: SAMSUNG 470 Series SSD, AXM09B1Q, max UDMA/133
[    2.766305] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.773441] hub 4-0:1.0: USB hub found
[    2.777290] hub 4-0:1.0: 2 ports detected
[    2.781606] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    2.787092] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    2.794863] ata1.00: configured for UDMA/133
[    2.799355] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG 470 Seri AXM0 PQ: 0 ANSI: 5
[    2.807559] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00
[    2.813955] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.820844] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.828134] usb usb5: Product: UHCI Host Controller
[    2.833073] usb usb5: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[    2.839747] usb usb5: SerialNumber: 0000:00:10.3
[    2.844816] hub 5-0:1.0: USB hub found
[    2.848660] hub 5-0:1.0: 2 ports detected
[    3.016024] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    3.199801] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    3.208102] sd 0:0:0:0: [sda] Write Protect is off
[    3.212996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.224432]  sda: sda1 sda2
[    3.227907] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.235857] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.297231] device-mapper: uevent: version 1.0.3
[    3.302721] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    7.368540] bio: create slab <bio-1> at 1
[    7.534039] bio: create slab <bio-1> at 1
[    7.625339] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[    7.632294] EXT4-fs (dm-0): write access will be enabled during recovery
[    7.644541] EXT4-fs (dm-0): recovery complete
[    7.649323] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    8.441222] udevd[297]: starting version 175
[    8.796212] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[    8.833021] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    8.930877] ACPI: Sleep Button [SLPB]
[    8.956570] parport_pc 00:03: reported by Plug and Play ACPI
[    8.971608] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    8.981060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.088124] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.134202] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    9.150368] ACPI: Power Button [PWRB]
[    9.204230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    9.257709] microcode: AMD CPU family 0xf not supported
[    9.297722] ACPI: Power Button [PWRF]
[    9.331033] snd_hda_intel 0000:20:01.0: PCI: Disallowing DAC for device
[    9.343875] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[    9.348940] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    9.380621] powernow-k8: Found 1 AMD Sempron(tm) Processor 3200+ (1 cpu cores) (version 2.20.00)
[    9.530206] input: HDA VIA VT82xx Line Out as /devices/pci0000:20/0000:20:01.0/sound/card0/input5
[    9.593744] input: HDA VIA VT82xx Line as /devices/pci0000:20/0000:20:01.0/sound/card0/input6
[    9.613041] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:20/0000:20:01.0/sound/card0/input7
[    9.852850] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[   11.177950] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439028
[   11.216246] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x439020
[   11.581733] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x23902c
[   11.585498] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x23902c
[   11.585498] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x23902c
[   11.585498] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x23902c
[   11.611709] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last cmd=0x43902c
[   14.683170] postgres (1058): /proc/1058/oom_adj is deprecated, please use /proc/1058/oom_score_adj instead.
Comment 1 Xavier Bachelot 2013-10-06 20:28:00 UTC
Are you able to start the system in non-graphical mode or does the hang happens even before X starts ?
If it works with non-graphical, what happen when you start X manually ? Can you provide the X log ?
Comment 2 Paul Menzel 2013-10-07 06:39:22 UTC
I just start into text mode and the hang happens there already. The strange thing is there is nothing, Linux outputs to the ring buffer.
Comment 3 Paul Menzel 2013-10-07 19:17:44 UTC
Using another RAM module and the system works fine. So the crash was due to a bad RAM module. Unfortunately, Memtest86+ did not find that error, so I was unsure about it and had to get another module first. Sorry for the noise.

No, idea if INVALID would be more appropriate than NOTABUG. Please change that, if I made the wrong choice.
Comment 4 Xavier Bachelot 2013-10-08 12:35:43 UTC
Thanks for the follow up.

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.