Created attachment 132322 [details] dmesg.log The following test cases causes assertion failure on GLK and latest configuration test output ==================================== IGT-Version: 1.19-g9918014 (x86_64) (Linux: 4.12.0-rc7-drm-tip-ww26-commit-85a692e+ x86_64) (kms_concurrent:1419) igt-core-DEBUG: Test requirement passed: !igt_run_in_simulation() (kms_concurrent:1419) drmtest-DEBUG: Test requirement passed: !(fd<0) (kms_concurrent:1419) igt-debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0' (kms_concurrent:1419) drmtest-DEBUG: Test requirement passed: drmSetMaster(fd) == 0 (kms_concurrent:1419) igt-kms-DEBUG: VT: graphics mode set (mode was 0x0) (kms_concurrent:1419) igt-kms-DEBUG: display: init { (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 60 to 1 (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 68 to 1 (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 72 to 1 (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 75 to 1 (kms_concurrent:1419) igt-kms-DEBUG: display: } (kms_concurrent:1419) DEBUG: Test requirement passed: data.display.n_pipes > 0 (kms_concurrent:1419) DEBUG: Test requirement passed: data.display.is_atomic (kms_concurrent:1419) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes) (kms_concurrent:1419) DEBUG: Test requirement passed: data->display.pipes[pipe].n_planes > 0 (kms_concurrent:1419) DEBUG: Test requirement passed: valid_tests (kms_concurrent:1419) igt-core-DEBUG: Starting subtest: pipe-A Testing resolution with connector eDP-1 using pipe A with seed 1498684117 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 60 to 1 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:1419) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:1419) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) (kms_concurrent:1419) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (kms_concurrent:1419) igt-kms-DEBUG: display: A.0: plane_set_fb(62) (kms_concurrent:1419) igt-kms-DEBUG: display: commit { (kms_concurrent:1419) igt-kms-DEBUG: display: A: Setting mode 1920x1080 from eDP-1 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.0, fb 62 (kms_concurrent:1419) igt-kms-DEBUG: display: src = (0, 0) 1920 x 1080 dst = (0, 0) 1920 x 1080 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: B: Setting NULL mode (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: C: Setting NULL mode (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_concurrent:1419) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: } (kms_concurrent:1419) DEBUG: Test requirement passed: !(ret != 0) (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:1420) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 60 to 1 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:1419) igt-kms-DEBUG: display: commit { (kms_concurrent:1419) igt-kms-DEBUG: display: A: Setting mode Custom 1024x768 from eDP-1 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.0, fb 62 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_concurrent:1420) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 60 to 1 (kms_concurrent:1419) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:1420) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:1419) igt-kms-DEBUG: display: } (kms_concurrent:1419) igt-kms-CRITICAL: Test assertion failure function do_display_commit, file igt_kms.c:2703: (kms_concurrent:1419) igt-kms-CRITICAL: Failed assertion: ret == 0 (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=256, height=256, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:1420) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) (kms_concurrent:1419) igt-kms-CRITICAL: Last errno: 22, Invalid argument (kms_concurrent:1419) igt-kms-CRITICAL: error: -22 != 0 Stack trace: (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=1024) (kms_concurrent:1420) igt-kms-DEBUG: display: A.1: plane_set_position(871,614) (kms_concurrent:1420) igt-kms-DEBUG: display: A.1: plane_set_fb(110) (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=256, height=256, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:1420) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=1024) (kms_concurrent:1420) igt-kms-DEBUG: display: A.2: plane_set_position(1129,35) (kms_concurrent:1420) igt-kms-DEBUG: display: A.2: plane_set_fb(112) (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=256, height=256, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:1420) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) #0 [__igt_fail_assert+0x101] (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=4, pitch=1024) (kms_concurrent:1420) igt-kms-DEBUG: display: A.3: plane_set_position(209,287) (kms_concurrent:1420) igt-kms-DEBUG: display: A.3: plane_set_fb(114) (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=128, height=128, format=0x34325241, tiling=0x0, size=0) (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=5, pitch=512) #1 [do_display_commit+0xaf5] (kms_concurrent:1420) igt-kms-DEBUG: display: A.4: plane_set_position(1354,660) (kms_concurrent:1420) igt-kms-DEBUG: display: A.4: plane_set_fb(118) (kms_concurrent:1420) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:1420) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) #2 [<unknown>+0xaf5] Subtest pipe-A failed. **** DEBUG **** (kms_concurrent:1419) INFO: Testing resolution with connector eDP-1 using pipe A with seed 1498684117 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 60 to 1 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:1419) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:1419) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) (kms_concurrent:1419) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (kms_concurrent:1419) igt-kms-DEBUG: display: A.0: plane_set_fb(62) (kms_concurrent:1419) igt-kms-DEBUG: display: commit { (kms_concurrent:1419) igt-kms-DEBUG: display: A: Setting mode 1920x1080 from eDP-1 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.0, fb 62 (kms_concurrent:1419) igt-kms-DEBUG: display: src = (0, 0) 1920 x 1080 dst = (0, 0) 1920 x 1080 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: B: Setting NULL mode (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: C: Setting NULL mode (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_concurrent:1419) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: } (kms_concurrent:1419) DEBUG: Test requirement passed: !(ret != 0) (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:1419) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 60 to 1 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:1419) igt-kms-DEBUG: display: commit { (kms_concurrent:1419) igt-kms-DEBUG: display: A: Setting mode Custom 1024x768 from eDP-1 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.0, fb 62 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: A.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_concurrent:1419) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_concurrent:1419) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:1419) igt-kms-DEBUG: display: } (kms_concurrent:1419) igt-kms-CRITICAL: Test assertion failure function do_display_commit, file igt_kms.c:2703: (kms_concurrent:1419) igt-kms-CRITICAL: Failed assertion: ret == 0 (kms_concurrent:1419) igt-kms-CRITICAL: Last errno: 22, Invalid argument (kms_concurrent:1419) igt-kms-CRITICAL: error: -22 != 0 **** END **** Subtest pipe-A: FAIL (0.154s) (kms_concurrent:1419) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes) (kms_concurrent:1419) DEBUG: Test requirement passed: data->display.pipes[pipe].n_planes > 0 (kms_concurrent:1419) DEBUG: Test requirement passed: valid_tests (kms_concurrent:1419) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes) (kms_concurrent:1419) DEBUG: Test requirement passed: data->display.pipes[pipe].n_planes > 0 (kms_concurrent:1419) DEBUG: Test requirement passed: valid_tests Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:354: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:354: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:354: Test requirement: !(pipe >= data->display.n_pipes) (kms_concurrent:1419) igt-core-DEBUG: Exiting with status code 99 (kms_concurrent:1419) igt-kms-DEBUG: VT: original mode 0x0 restored (kms_concurrent:1419) igt-debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0' ====================================== Software ====================================== architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety kernel driver : i915 bios revision : 50.51 bios release date : 06/02/2017 ksc : 1.32 ====================================== Graphic drivers ====================================== Component: drm tag: libdrm-2.4.80-29-g7e6bf88 commit: 7e6bf88cac315a9fa41818cf72a7b5d18a2cb1fc Component: cairo tag: 1.15.4-28-g57b4050 commit: 57b40507dda3f58dfc8635548d606b86dc7bcf51 Component: intel-gpu-tools tag: intel-gpu-tools-1.18-284-g9918014 commit: 9918014df55d0393f99a31e3c398a4b38c90bb80 Component: piglit tag: piglit-v1 commit: 1b8356e6dfa07480c154fccb47f6ef9c908ef652 ====================================== Kernel ====================================== commit 85a692e2c6a7cf93082044d776e838cb9e9b2146 Author: Chris Wilson <chris@chris-wilson.co.uk> AuthorDate: Wed Jun 28 15:25:29 2017 +0100 Commit: Chris Wilson <chris@chris-wilson.co.uk> CommitDate: Wed Jun 28 15:25:29 2017 +0100 ====================================== Hardware ====================================== platform : Geminilake motherboard model : Geminilake motherboard id : GLKRVP1DDR4(05) form factor : Hand Held manufacturer : IntelCorp. cpu family : Other cpu family id : 6 cpu information : Genuine Intel(R) CPU @ 1.10GHz gpu card : Intel Corporation Device 3184 (rev 01) (prog-if 00 [VGA controller]) memory ram : 3.67 GB max memory ram : 16 GB cpu thread : 4 cpu core : 4 cpu model : 122 cpu stepping : 0 hard drive : 74GiB (80GB) current cd clock frequency : 79200 kHz maximum cd clock frequency : 316800 kHz displays connected : eDP-1 DP-1 HDMI-A-2 ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.4 guc fw loaded : SUCCESS guc version wanted : 10.56 guc version found : 10.56 ====================================== kernel parameters ====================================== drm.debug=0x1e i915.alpha_support=1 resume=/dev/sda3 fastboot i915.enable_guc_loading=2 i915.enable_guc_submission=2 log_buf_len=1M attachments ================================= dmesg.log kern.log
Created attachment 132323 [details] kern.log
Adding tag into "Whiteboard" field - ReadyForDev *Status is correct *Platform is included *Feature is included *Priority and Severity correctly set *Logs included
The following test fail on IVB with latest configuration Tests List: igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C This is my configuration: ==================================================== Graphic Stack ==================================================== Component: drm tag: libdrm-2.4.81-33-g3876bc2 commit: 3876bc246a07070a6043159cd7623d4def9bbd4c Component: cairo tag: 1.15.6-2-g57b4050 commit: 57b40507dda3f58dfc8635548d606b86dc7bcf51 Component: intel-gpu-tools tag: intel-gpu-tools-1.19-112-g493151b commit: 493151b0768aa4ca535cef49cb7efa174a9c3a77 Component: piglit tag: piglit-v1 commit: 973892687cf5c2f8e2dbe1d22998b82736643787 ====================================== Hardware ====================================== platform : Ivy Bridge motherboard model : HPEliteBookRevolve810G1 motherboard id : 18F8 form factor : Notebook manufacturer : Hewlett-Packard cpu family : Core i5 cpu family id : 6 cpu information : Intel(R) Core(TM) i5-3437U CPU @ 1.90GHz gpu card : Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller]) memory ram : 3.7 GB max memory ram : 16 GB cpu thread : 4 cpu core : 2 cpu model : 58 cpu stepping : 9 socket : Other signature : Type 0, Family 6, Model 58, Stepping 9 hard drive : 119GiB (128GB) current cd clock frequency : 400000 kHz maximum cd clock frequency : 400000 kHz displays connected : LVDS-1 DP-3
Created attachment 132889 [details] Tests Log
Created attachment 132890 [details] Dmesg.log
These tests are still failing over GLK with the following configuration Tests List: igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C Software ====================================== kernel version : 4.13.0-rc4-drm-tip-ww32-commit-ef8894e+ hostname : gfx-desktop architecture : x86_64 os version : Ubuntu 17.04 os codename : zesty kernel driver : i915 bios revision : 52.23 bios release date : 06/24/2017 ksc : 1.36 hardware acceleration : disabled swap partition : enabled on (/dev/sda2) ====================================== Graphic drivers ====================================== intel-gpu-tools : 1.17-1 ====================================== Hardware ====================================== platform : Geminilake motherboard model : Geminilake motherboard id : GLKRVP1DDR4(05) form factor : Hand Held manufacturer : IntelCorp. cpu family : Other cpu family id : 6 cpu information : Genuine Intel(R) CPU @ 1.10GHz gpu card : Intel Corporation Device 3184 (rev 01) (prog-if 00 [VGA controller]) memory ram : 5.64 GB max memory ram : 16 GB cpu thread : 4 cpu core : 4 cpu model : 122 cpu stepping : 0 socket : Other hard drive : 223GiB (240GB) current cd clock frequency : 79200 kHz maximum cd clock frequency : 316800 kHz
igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C Still failing on GLK with: commit ad6ab9f96437f0cb1f4d8a7840fd9eeb894eb12e Author: Gustavo Padovan <gustavo.padovan@collabora.com> AuthorDate: Fri Aug 18 15:26:42 2017 -0300 Commit: Gustavo Padovan <gustavo.padovan@collabora.com> CommitDate: Fri Aug 18 15:26:42 2017 -0300 drm-tip: 2017y-08m-18d-18h-21m-46s UTC integration manifest
The following test PASS on GLK Tests List: igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C This is my configuration: ==================================================== Graphic Stack ==================================================== Component: drm tag: libdrm-2.4.81-54-g6dca938 commit: 6dca9387d20204898f9e831d59b725d062513fd0 Component: cairo tag: 1.15.6-36-g8ff3019 commit: 8ff3019f51bd40c23d8a0dd5e51ce3fab6442d6e Component: intel-gpu-tools tag: intel-gpu-tools-1.19-289-gc718ba8 commit: c718ba805208e55d675defe9b2a66852e2ae038c Component: piglit tag: piglit-v1 commit: f7f52e558b39135add3eec594423c2b7fc30a430 ====================================== Software ====================================== kernel version : 4.13.0-drm-tip-ww37-commit-9adc9e9+ hostname : GLK-1-GLKRVP1DDR405 architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety kernel driver : i915 bios revision : 60.34 bios release date : 08/09/2017 ksc : 1.41 hardware acceleration : disabled swap partition : enabled on (/dev/sda3) ====================================== Graphic drivers ====================================== libdrm : 2.4.83 cairo : 1.15.9 intel-gpu-tools (tag) : intel-gpu-tools-1.19-289-gc718ba8 intel-gpu-tools (commit) : c718ba8 ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.4 guc fw loaded : SUCCESS guc version wanted : 10.56 guc version found : 10.56 huc fw loaded : yes ====================================== kernel parameters ====================================== quiet drm.debug=0x1e i915.enable_guc_loading=2 i915.enable_guc_submission=2 i915.alpha_support=1 auto panic=1 nmi_watchdog=panic resume=/dev/sda3 fastboot
The following test cases are failing on CFL with latest configuration ======================================= Test List ======================================= igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B ====================================== Software ====================================== kernel version : 4.14.0-rc1-drm-tip-ww38-commit-099f750+ hostname : CFL-CNP architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety kernel driver : i915 bios revision : 95.4 bios release date : 07/24/2017 ksc : 1.5 hardware acceleration : disabled swap partition : enabled on (/dev/sda3) ====================================== Graphic drivers ====================================== grep: /opt/X11R7/var/log/Xorg.0.log: No such file or directory libdrm : 2.4.83 cairo : 1.15.9 intel-gpu-tools (tag) : intel-gpu-tools-1.19-304-g93f72b2 intel-gpu-tools (commit) : 93f72b2 ====================================== Hardware ====================================== motherboard model : CoffeeLakeClientPlatform motherboard id : CoffeeLakeSUDIMMRVP form factor : Desktop manufacturer : IntelCorporation cpu family : Other cpu family id : 6 cpu information : Genuine Intel(R) CPU 0000 @ 3.60GHz gpu card : Intel Corporation Device 3e92 (prog-if 00 [VGA controller]) memory ram : 15.58 GB max memory ram : 32 GB cpu thread : 12 cpu core : 6 cpu model : 158 cpu stepping : 10 socket : Other hard drive : 111GiB (120GB) current cd clock frequency : 337500 kHz maximum cd clock frequency : 675000 kHz displays connected : eDP-1 DP-1 DP-2 ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.1 guc fw loaded : SUCCESS guc version wanted : 9.14 guc version found : 9.14 huc fw loaded : yes ====================================== kernel parameters ====================================== quiet drm.debug=0x1e pci=pcie_bus_safe intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic i915.alpha_support=1 i915.enable_guc_loading=2 i915.enable_guc_submission=2 resume=/dev/sda3 fastboot ====================================== Output summary ====================================== (kms_concurrent:1574) igt-kms-CRITICAL: Test assertion failure function do_display_commit, file igt_kms.c:2681: (kms_concurrent:1574) igt-kms-CRITICAL: Failed assertion: ret == 0 (kms_concurrent:1574) igt-kms-CRITICAL: Last errno: 22, Invalid argument (kms_concurrent:1574) igt-kms-CRITICAL: error: -22 != 0 (kms_concurrent:1574) igt-core-INFO: Stack trace: (kms_concurrent:1574) igt-core-INFO: #0 [__igt_fail_assert+0x101] (kms_concurrent:1574) igt-core-INFO: #1 [do_display_commit+0xa14] (kms_concurrent:1574) igt-core-INFO: #2 [<unknown>+0xa14] **** END **** Subtest pipe-A: FAIL (0.298s)
This test is still failing on GLK QA Tests List: igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C ==================================================== Output ==================================================== . . . **** DEBUG **** (kms_concurrent:16084) INFO: Testing resolution with connector eDP-1 using pipe A with seed 1506601353 (kms_concurrent:16084) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:16084) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 76 to 1 (kms_concurrent:16084) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:16084) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_concurrent:16084) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:16084) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) (kms_concurrent:16084) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (kms_concurrent:16084) igt-kms-DEBUG: display: A.0: plane_set_fb(78) (kms_concurrent:16084) igt-kms-DEBUG: display: commit { (kms_concurrent:16084) igt-kms-DEBUG: display: A: Setting mode 1920x1080 from eDP-1 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.0, fb 78 (kms_concurrent:16084) igt-kms-DEBUG: display: src = (0, 0) 1920 x 1080 dst = (0, 0) 1920 x 1080 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.3, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.4, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: B: Setting NULL mode (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: C: Setting NULL mode (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_concurrent:16084) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:16084) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:16084) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:16084) igt-kms-DEBUG: display: } (kms_concurrent:16084) DEBUG: Test requirement passed: !(ret != 0) (kms_concurrent:16084) igt-kms-DEBUG: display: eDP-1: set_pipe(A) (kms_concurrent:16084) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 76 to 1 (kms_concurrent:16084) igt-kms-DEBUG: display: eDP-1: Selecting pipe A (kms_concurrent:16084) igt-kms-DEBUG: display: commit { (kms_concurrent:16084) igt-kms-DEBUG: display: A: Setting mode Custom 1024x768 from eDP-1 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.0, fb 78 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.3, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: A.4, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_concurrent:16084) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_concurrent:16084) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:16084) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:16084) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:16084) igt-kms-DEBUG: display: } (kms_concurrent:16084) igt-kms-CRITICAL: Test assertion failure function do_display_commit, file igt_kms.c:2681: (kms_concurrent:16084) igt-kms-CRITICAL: Failed assertion: ret == 0 (kms_concurrent:16084) igt-kms-CRITICAL: Last errno: 22, Invalid argument (kms_concurrent:16084) igt-kms-CRITICAL: error: -22 != 0 (kms_concurrent:16084) igt-core-INFO: Stack trace: (kms_concurrent:16084) igt-core-INFO: #0 [__igt_fail_assert+0x101] (kms_concurrent:16084) igt-core-INFO: #1 [do_display_commit+0xa14] (kms_concurrent:16084) igt-core-INFO: #2 [<unknown>+0xa14] **** END **** . . . This is my configuration: ====================================== Graphic stack ====================================== Component: drm tag: libdrm-2.4.81-56-g7c71188 commit: 7c71188610b4ceba0339c2bc884320bcb749adee Component: cairo tag: 1.15.6-42-gdccbed7 commit: dccbed7d78d32bd3b912e8810379451dd94e6a1f Component: intel-gpu-tools tag: intel-gpu-tools-1.19-332-g0a91a5e commit: 0a91a5e9624d41d23b79e2540eda111cb56d42d9 Component: piglit tag: piglit-v1 commit: 95e2f51a28b6cf7ff77d84e1234121c98f10ef64 ====================================== Software ====================================== kernel version : 4.14.0-rc2-drm-tip-ww39-commit-d76cbbc+ hostname : GLK-2-GLKRVP1DDR405 architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety kernel driver : i915 bios revision : 62.30 bios release date : 08/22/2017 ksc : 1.41 hardware acceleration : disabled swap partition : enabled on (/dev/sda3) ====================================== Graphic drivers ====================================== grep: /opt/X11R7/var/log/Xorg.0.log: No such file or directory libdrm : 2.4.83 cairo : 1.15.9 intel-gpu-tools (tag) : intel-gpu-tools-1.19-332-g0a91a5e intel-gpu-tools (commit) : 0a91a5e ====================================== Hardware ====================================== . . . ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.4 guc fw loaded : SUCCESS guc version wanted : 10.56 guc version found : 10.56 huc fw loaded : yes ====================================== kernel parameters ====================================== quiet drm.debug=0xe pci=pcie_bus_safe i915.alpha_support=1 i915.enable_guc_loading=2 i915.enable_guc_submission=2 intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic resume=/dev/sda3 fastboot
This test are failing on CFL-S-1 QA Tests List: igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B ==================================================== Output ==================================================== . . . **** DEBUG **** (kms_concurrent:2490) INFO: Testing resolution with connector eDP-1 using pipe B with seed 1506670565 (kms_concurrent:2490) igt-kms-DEBUG: display: eDP-1: set_pipe(B) (kms_concurrent:2490) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 48 to 1 (kms_concurrent:2490) igt-kms-DEBUG: display: eDP-1: Selecting pipe B (kms_concurrent:2490) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_concurrent:2490) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x100000000000001, size=0) (kms_concurrent:2490) drmtest-DEBUG: Test requirement passed: is_i915_device(fd) && has_known_intel_chipset(fd) (kms_concurrent:2490) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (kms_concurrent:2490) igt-kms-DEBUG: display: B.0: plane_set_fb(74) (kms_concurrent:2490) igt-kms-DEBUG: display: commit { (kms_concurrent:2490) igt-kms-DEBUG: display: A: Setting NULL mode (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: A.0, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: B: Setting mode 1920x1080 from eDP-1 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: B.0, fb 74 (kms_concurrent:2490) igt-kms-DEBUG: display: src = (0, 0) 1920 x 1080 dst = (0, 0) 1920 x 1080 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: B (kms_concurrent:2490) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: DP-2: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: DP-3: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: } (kms_concurrent:2490) DEBUG: Test requirement passed: !(ret != 0) (kms_concurrent:2490) igt-kms-DEBUG: display: eDP-1: set_pipe(B) (kms_concurrent:2490) igt-kms-DEBUG: Setting Broadcast RGB mode on connector 48 to 1 (kms_concurrent:2490) igt-kms-DEBUG: display: eDP-1: Selecting pipe B (kms_concurrent:2490) igt-kms-DEBUG: display: commit { (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: A.0, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: A.1, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: A.2, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: B: Setting mode Custom 1024x768 from eDP-1 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: B.0, fb 74 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: B.1, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_concurrent:2490) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: B (kms_concurrent:2490) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: DP-2: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: DP-3: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_concurrent:2490) igt-kms-DEBUG: display: } (kms_concurrent:2490) igt-kms-CRITICAL: Test assertion failure function do_display_commit, file igt_kms.c:2681: (kms_concurrent:2490) igt-kms-CRITICAL: Failed assertion: ret == 0 (kms_concurrent:2490) igt-kms-CRITICAL: Last errno: 22, Invalid argument (kms_concurrent:2490) igt-kms-CRITICAL: error: -22 != 0 (kms_concurrent:2490) igt-core-INFO: Stack trace: (kms_concurrent:2490) igt-core-INFO: #0 [__igt_fail_assert+0x101] (kms_concurrent:2490) igt-core-INFO: #1 [do_display_commit+0xa14] (kms_concurrent:2490) igt-core-INFO: #2 [<unknown>+0xa14] **** END **** . . . This is my configuration: ====================================== Graphic stack ====================================== Component: drm tag: libdrm-2.4.81-56-g7c71188 commit: 7c71188610b4ceba0339c2bc884320bcb749adee Component: cairo tag: 1.15.6-42-gdccbed7 commit: dccbed7d78d32bd3b912e8810379451dd94e6a1f Component: intel-gpu-tools tag: intel-gpu-tools-1.19-334-g2885b10 commit: 2885b10f99b4beeb046e75af8b8488c229f629d3 Component: piglit tag: piglit-v1 commit: e1f66fb2fb8ad781ca755831983b6662c4c440d4 ====================================== Software ====================================== kernel version : 4.14.0-rc2-drm-tip-ww39-commit-85932e1+ hostname : CFL-S-1 architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety kernel driver : i915 bios revision : 104.3 bios release date : 09/14/2017 ksc : 1.5 hardware acceleration : disabled swap partition : enabled on (/dev/sda3 /dev/nvme0n1p3) ====================================== Graphic drivers ====================================== libdrm : 2.4.83 cairo : 1.15.9 intel-gpu-tools (tag) : intel-gpu-tools-1.19-334-g2885b10 intel-gpu-tools (commit) : 2885b10 ====================================== Hardware ====================================== motherboard model : CoffeeLakeClientPlatform motherboard id : CoffeeLakeSUDIMMRVP form factor : Desktop manufacturer : IntelCorporation cpu family : Other cpu family id : 6 cpu information : Genuine Intel(R) CPU 0000 @ 3.60GHz gpu card : Intel Corporation Device 3e92 (prog-if 00 [VGA controller]) memory ram : 15.58 GB max memory ram : 32 GB cpu thread : 12 cpu core : 6 cpu model : 158 cpu stepping : 10 socket : Other hard drive : 111GiB (120GB) current cd clock frequency : 337500 kHz maximum cd clock frequency : 675000 kHz displays connected : eDP-1 DP-1 ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.1 guc fw loaded : SUCCESS guc version wanted : 9.14 guc version found : 9.14 ====================================== kernel parameters ====================================== quiet drm.debug=0xe pci=pcie_bus_safe intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic i915.alpha_support=1 i915.enable_guc_loading=2 i915.enable_guc_submission=2 resume=/dev/sda3 fastboot
This tests still failing on GLK QA Tests List: igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C ==================================================== Output ==================================================== . . . This is my configuration: ====================================== Graphic stack ====================================== Component: drm tag: libdrm-2.4.81-57-g1dd84e0 commit: 1dd84e01a972b1759839a7326009be24ab3e6de2 Component: cairo tag: 1.15.6-42-gdccbed7 commit: dccbed7d78d32bd3b912e8810379451dd94e6a1f Component: intel-gpu-tools tag: intel-gpu-tools-1.19-357-g1e99f8b commit: 1e99f8b8d2563d7f5c4e82932bab15abc5eacaef Component: piglit tag: piglit-v1 commit: 5aa6eea37f44f818632a3dad4c1a7478085bd56d ====================================== Software ====================================== kernel version : 4.14.0-rc3-drm-tip-ww40-commit-2f14e31+ hostname : GLK-1-GLKRVP1DDR405 architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety kernel driver : i915 bios revision : 62.30 bios release date : 08/22/2017 ksc : 1.41 hardware acceleration : disabled swap partition : enabled on (/dev/sda3) ====================================== Graphic drivers ====================================== libdrm : 2.4.83 cairo : 1.15.9 intel-gpu-tools (tag) : intel-gpu-tools-1.19-357-g1e99f8b intel-gpu-tools (commit) : 1e99f8b ====================================== Hardware ====================================== . . . ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.4 guc fw loaded : SUCCESS guc version wanted : 10.56 guc version found : 10.56 ====================================== kernel parameters ====================================== quiet drm.debug=0x1e pci=pcie_bus_safe intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic i915.alpha_support=1 i915.enable_guc_loading=2 i915.enable_guc_submission=2 resume=/dev/sda3 fastboot
This tests are passing on GLK QA igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C IGT-Version: 1.20-g39ac6b8 (x86_64) (Linux: 4.15.0-rc2-drm-intel-qa-ww49-commit-b5f297e0+ x86_64) Testing resolution with connector eDP-1 using pipe C with seed 1481346885 Testing resolution with connector DP-1 using pipe C with seed 1481346885 Testing resolution with connector HDMI-A-2 using pipe C with seed 1481346885 Testing resolution with connector eDP-1 using pipe C with seed 1481346889 Testing resolution with connector DP-1 using pipe C with seed 1481346889 Testing resolution with connector HDMI-A-2 using pipe C with seed 1481346889 Testing resolution with connector eDP-1 using pipe C with seed 1481346892 Testing resolution with connector DP-1 using pipe C with seed 1481346892 Testing resolution with connector HDMI-A-2 using pipe C with seed 1481346892 Subtest pipe-C: SUCCESS (10.690s) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) This tests are passing on IVB QA igt@kms_concurrent@pipe-A igt@kms_concurrent@pipe-B igt@kms_concurrent@pipe-C IGT-Version: 1.20-g39ac6b8 (x86_64) (Linux: 4.15.0-rc2-drm-intel-qa-ww49-commit-b5f297e0+ x86_64) Testing resolution with connector VGA-1 using pipe C with seed 1512853398 Testing resolution with connector HDMI-A-1 using pipe C with seed 1512853398 Testing resolution with connector VGA-1 using pipe C with seed 1512853398 Testing resolution with connector HDMI-A-1 using pipe C with seed 1512853398 Subtest pipe-C: SUCCESS (0.943s) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) This test are passing/skiping on CFL QA igt@kms_concurrent@pipe-A -> pass igt@kms_concurrent@pipe-B -> pass igt@kms_concurrent@pipe-C <-- skip, is this expected? IGT-Version: 1.20-g39ac6b8 (x86_64) (Linux: 4.15.0-rc2-drm-intel-qa-ww49-commit-b5f297e0+ x86_64) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Subtest pipe-C: SKIP Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Test requirement not met in function run_tests_for_pipe, file kms_concurrent.c:351: Test requirement: !(pipe >= data->display.n_pipes) Note: I removed IVB and GLK for the passing tests
According to our results, these tests haven't failed for more than a month now. So closing. Thanks.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.