Created attachment 133339 [details] dmesg log The following test cases fail on GLK with latest configuration, these test cases take more than ten minutes and sometimes they never finish of execute. ====================================== Test list ====================================== igt@gem_softpin@evict-hang igt@gem_softpin@noreloc-S3 igt@gem_softpin@noreloc-S4 ====================================== Software ====================================== kernel version : 4.13.0-rc3-drm-tip-ww31-commit-372e2eb+ /bin/bash: gfx-desktop: command not found architecture : x86_64 os version : Ubuntu 16.10 os codename : yakkety [sudo] password for gfx: kernel driver : i915 bios revision : 52.23 bios release date : 06/24/2017 ksc : 1.36 hardware acceleration : disabled swap partition : enabled on (/dev/sda3) ====================================== Graphic drivers ====================================== modesetting : enabled modesetting compiled for : 1.18.4 X.Org Video Driver xorg-xserver : 1.18.4 libdrm : 2.4.82 cairo : 1.15.7 intel-gpu-tools (tag) : intel-gpu-tools-1.19-126-g6e1ccfa intel-gpu-tools (commit) : 6e1ccfa ====================================== Hardware ====================================== platform : Geminilake motherboard model : Geminilake motherboard id : GLKRVP1DDR4(05) form factor : Hand Held manufacturer : IntelCorp. cpu family : Other cpu family id : 6 cpu information : Genuine Intel(R) CPU @ 1.10GHz gpu card : Intel Corporation Device 3184 (rev 01) (prog-if 00 [VGA controller]) memory ram : 7.6 GB max memory ram : 16 GB cpu thread : 4 cpu core : 4 cpu model : 122 cpu stepping : 0 socket : Other hard drive : 111GiB (120GB) current cd clock frequency : 79200 kHz maximum cd clock frequency : 316800 kHz displays connected : eDP-1 ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.4 guc fw loaded : SUCCESS guc version wanted : 10.56 guc version found : 10.56 huc fw loaded : yes ====================================== kernel parameters ====================================== quiet splash drm.debug=0x1e log_buf_len=4M i915.alpha_support=1 i915.enable_guc_submission=2 i915.enable_guc_loading=2
Created attachment 133340 [details] kernel log
Created attachment 133341 [details] test log
Adding tag into "Whiteboard" field - ReadyForDev *Status is correct *Platform is included *Feature is included *Priority and Severity correctly set *Logs included
Created attachment 133696 [details] debug.conf
After testing and research from our QA team, it was found that the specific config file from FI that was being used to compile the kernel, had a lot of disable parameters to improve performance while running IGT. The problem was that some of those parameters were required to use the firmware effectively. It was agreed to use a generic config file from kernel.org. These tests still are failing showing a different issue. They would be tested again and if needed a new bug will be open. Thank you.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.