on XFree all work without problems

Please reopen if this is still true in 1.5 or later, pciaccess should find it.

Current Operating System: Linux e450 2.6.29.6 #3 SMP Wed Apr 28 18:17:38 CEST 2010 sparc64
Kernel command line: root=/dev/sda1 ro
Build Date: 19 April 2010  07:17:08PM
xorg-server 2:1.7.6.901-3 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May  7 08:20:27 2010
List of video drivers:
	glint
	r128
	mach64
	radeon
	ati
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(WW) GLINT: No matching Device section for instance (BusID PCI:2@0:4:0) found
Number of created screens does not match number of detected devices.
  Configuration failed.

Still not detected. May be I have wrong Xorg version? (debian squeeze)

Sorry, sorry. After reboot Xorg with glint start working.


(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
        pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) Primary Device is: PCI 00@02:04:0
(WW) Falling back to old probe method for glint
(--) Assigning device section with no busID to primary device
(--) Chipset pm2v found
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm2v"
(--) GLINT(0): Linear framebuffer at 0x1000000
(--) GLINT(0): MMIO registers at 0x30000
(--) GLINT(0): VideoRAM: 8192 kByte
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) GLINT(0): FIFO Size is 256 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(--) GLINT(0): Max pixel clock is 110 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(0): Manufacturer: ADI  Model: 9350  Serial#: 285
(II) GLINT(0): Year: 2001  Week: 45
(II) GLINT(0): EDID Version: 1.2
(II) GLINT(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) GLINT(0): Sync:  Separate
(II) GLINT(0): Max Image Size [cm]: horiz.: 36  vert.: 27
(II) GLINT(0): Gamma: 2.88
(II) GLINT(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) GLINT(0): redX: 0.625 redY: 0.340   greenX: 0.310 greenY: 0.592
(II) GLINT(0): blueX: 0.150 blueY: 0.063   whiteX: 0.281 whiteY: 0.311
(II) GLINT(0): Supported established timings:
(II) GLINT(0): 720x400@70Hz
(II) GLINT(0): 640x480@60Hz
(II) GLINT(0): 640x480@75Hz
(II) GLINT(0): 800x600@60Hz
(II) GLINT(0): 800x600@75Hz
(II) GLINT(0): 832x624@75Hz
(II) GLINT(0): 1024x768@60Hz
(II) GLINT(0): 1024x768@75Hz
(II) GLINT(0): 1280x1024@75Hz
(II) GLINT(0): 1152x864@75Hz
(II) GLINT(0): Manufacturer's mask: 0
(II) GLINT(0): Supported standard timings: