Created attachment 137541 [details] dmesg The following test cases are failing on CNL, no sure what is the problem I couldn't see an assertion or something like that. =================== Test Cases =================== igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic ====================================== Software ====================================== kernel version : 4.16.0-rc2-drm-tip-ww8-commit-e09e4db+ hostname : gfx-desktop architecture : x86_64 os version : Ubuntu 17.10 os codename : artful [sudo] password for gfx: kernel driver : i915 bios revision : 124.2 bios release date : 02/05/2018 ksc : 1.36 hardware acceleration : disabled swap partition : enabled on (/dev/nvme0n1p2) ====================================== Graphic drivers ====================================== grep: /opt/X11R7/var/log/Xorg.0.log: No such file or directory libdrm : 2.4.90 cairo : 1.15.11 intel-gpu-tools (tag) : intel-gpu-tools-1.21-124-g960e55a8 intel-gpu-tools (commit) : 960e55a8 ====================================== Hardware ====================================== motherboard model : CannonLakeClientPlatform motherboard id : CannonLakeYLPDDR4RVP form factor : Laptop manufacturer : IntelCorporation cpu family : Other cpu family id : 6 cpu information : Genuine Intel(R) CPU 0000 @ 1.00GHz gpu card : Intel Corporation Device 5a49 (rev 03) (prog-if 00 [VGA controller]) memory ram : 7.63 GB max memory ram : 8 GB cpu thread : 4 cpu core : 2 cpu model : 102 cpu stepping : 2 socket : Other current cd clock frequency : 336000 kHz maximum cd clock frequency : 528000 kHz displays connected : eDP-1 HDMI-A-1 ====================================== Firmware ====================================== dmc fw loaded : yes dmc version : 1.7 guc fw loaded : fetch NONE, load NONE guc version wanted : wanted 0.0, found 0.0 guc version found : wanted 0.0, found 0.0 ====================================== kernel parameters ====================================== splash i915.alpha_support=1 drm.debug=0x1e
Created attachment 137542 [details] kernel log
Created attachment 137543 [details] test output
Regression? Bisect?
As referece: On CNL with commit-6c10ba2 igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic, skip igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic, skip And with commit-8a1ed24 igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic, fail igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic, fail I'll try bisecting if still replicable with latest drm-tip.
To add the results: With commit-562dc33 igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic, success igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic, success And commit-b2e10fd+ igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic, fail igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic, fail Need to check how reliable is this fail. Though CNL is busy right now with some other tests, so is not possible at the moment.
This tests has failing on CNL QA Tests List: igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic output sample: . . . **** DEBUG **** (kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_W" to 0x40/64 (kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_H" to 0x40/64 (kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "FB_ID" to 0x9d/157 (kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: eDP-1: preparing atomic, pipe: A (kms_cursor_legacy:887) igt-kms-DEBUG: eDP-1: Setting property "CRTC_ID" to 0x33/51 (kms_cursor_legacy:887) igt-kms-DEBUG: eDP-1: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: DP-1: preparing atomic, pipe: A (kms_cursor_legacy:887) igt-kms-DEBUG: DP-1: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: DP-1: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: DP-2: preparing atomic, pipe: A (kms_cursor_legacy:887) igt-kms-DEBUG: DP-2: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: DP-2: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: set_pipe(None) (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: Selecting pipe None (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_fb(146) (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_size (2560x1440) (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_size(2560x1440) (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: A.0, fb 146 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xa000000/167772160 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x5a00000/94371840 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xa00/2560 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x5a0/1440 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x92/146 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x33/51 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: set_pipe(B) (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: Selecting pipe B (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x8e/142 (kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x1/1 (kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: B (kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x4b/75 (kms_cursor_legacy:887) igt-kms-DEBUG: display: } (kms_cursor_legacy:887) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_fb(146) (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_size (2560x1440) (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_size(2560x1440) (kms_cursor_legacy:887) igt-kms-DEBUG: display: commit { (kms_cursor_legacy:887) igt-kms-DEBUG: display: populating plane data: A.0, fb 146 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xa000000/167772160 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x5a00000/94371840 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xa00/2560 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x5a0/1440 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x92/146 (kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x33/51 (kms_cursor_legacy:887) igt-core-INFO: Timed out: Scheduling page flip **** END **** . . . software: IGT-Version: 1.21-ge3a0ed9 (x86_64) (Linux: 4.16.0-rc4-drm-intel-qa-ww10-commit-8a4eb45+ x86_64)
First of all. Sorry about spam. This is mass update for our bugs. Sorry if you feel this annoying but with this trying to understand if bug still valid or not. If bug investigation still in progress, please ignore this and I apologize! If you think this is not anymore valid, please comment to the bug that can be closed. If you haven't tested with our latest pre-upstream tree(drm-tip), can you do that also to see if issue is valid there still and if you cannot see issue there, please comment to the bug.
Tests still failed with ww12-commit-4db112a+ but is green with ww14-commit-c46052c+, so I'll mark as resolve. Please reopen if this shows again. Thank you. Results for igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic Result: fail Out IGT-Version: 1.22-g0721161 (x86_64) (Linux: 4.16.0-rc6-drm-intel-qa-ww12-commit-4db112a+ x86_64) Test requirement not met in function __real_main1358, file kms_cursor_legacy.c:1378: Test requirement: !(n >= display.n_pipes) Timed out: Scheduling page flip Subtest 2x-nonblocking-modeset-vs-cursor-atomic: FAIL (2.452s) Err Subtest 2x-nonblocking-modeset-vs-cursor-atomic failed. Results for igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic Result: pass Out IGT-Version: 1.21-ge3a0ed9 (x86_64) (Linux: 4.16.0-rc7-drm-intel-qa-ww14-commit-c46052c+ x86_64) Test requirement not met in function __real_main1358, file kms_cursor_legacy.c:1378: Test requirement: !(n >= display.n_pipes) Subtest 2x-nonblocking-modeset-vs-cursor-atomic: SUCCESS (0.205s)
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.