Gentoo linux randr-1.2 nouveau branch NVidia Quadro FX 4500 ------------------------------- 40:00.0 VGA compatible controller: nVidia Corporation G70GL [Quadro FX 4500] (rev a1) (prog-if 00 [VGA]) Subsystem: nVidia Corporation Unknown device 02af Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d1000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d2000000 (64-bit, non-prefetchable) [size=16M] I/O ports at 1000 [size=128] [virtual] Expansion ROM at d0000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting ------------------------------- X output: (==) Using config file: "/etc/X11/xorg.conf" DCB size is 19, entries is 0A (II) Module already built-in (II) Module already built-in (II) Module already built-in crtc 0 1600 1600 writting vpll 00020601 writting vpll2 00000000 output 0 debug_0 01141191 savep->dither 00070000 1: crtc 0 output0: 0000: twocrt 0 twomon 0 (EE) AIGLX error: drmMap of framebuffer failed (Invalid argument)(EE) AIGLX: reverting to software rendering Fatal server error: DMA queue hang: dmaPut=1ff6, current=0, status=0 writting vpll 00031805 writting vpll2 00050D02 writting vpll 00031805 writting vpll2 00050D02
Created attachment 11447 [details] Xorg log
Created attachment 11448 [details] DRM output
1. The randr-1.2 branch shouldn't be used anymore, use master with Option "Randr12" "1". 2. This is an NV47 iirc, currently not supported, please try this patch: http://madman2003.ath.cx/nv47_ctx_init.patch If it doesn't work, then try to go trough this procedure http://nouveau.freedesktop.org/wiki/CtxInit
That's a drm patch btw.
Created attachment 11462 [details] Xorg log after patching drm & switching to master
Created attachment 11463 [details] DRM output after patching DRM & switching to master Build Date: 06 September 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 7 16:46:01 2007 (++) Using config file: "/etc/X11/xorg.conf.nouveau" (II) Module already built-in (II) Module already built-in (II) Module already built-in DISPATCH ERROR! _glapi_add_dispatch failed to add glGetVertexAttribPointerv! DISPATCH ERROR! _glapi_add_dispatch failed to add glVertexAttrib4iv! DISPATCH ERROR! _glapi_add_dispatch failed to add glVertexAttrib4bv! DISPATCH ERROR! _glapi_add_dispatch failed to add glVertexAttrib4ubv! DISPATCH ERROR! _glapi_add_dispatch failed to add glVertexAttrib4usv! DISPATCH ERROR! _glapi_add_dispatch failed to add glGetVertexAttribPointerv! DISPATCH ERROR! _glapi_add_dispatch failed to add glVertexAttrib4uiv! Fatal server error: DMA queue hang: dmaPut=1ffc, current=0, status=0
The drm output is without the debug option(insmod drm.ko debug=1), but i suspect that the context switching is broken. I suggest you try the procedure here: http://nouveau.freedesktop.org/wiki/CtxInit to discover it yourself.
This problem is (probably) related to multiple NV47 existing with different amount of pipelines, therefore they need different context voodoo's. This cannot be handled properly until darktama finishes his microcode generator. Don't expect this very soon though.
Reopening. Still think this should be WONTFIX or LATER.
Is this now fixed?
No reply for well over a year, assuming FIXED.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.