Hi, I would like to know when will PAL will be supported by the driver. Thx -- Issa
It's supported for quite long time. If you have specific problem, please reopen and provide detailed info according to http://intellinuxgraphics.org/how_to_report_bug.html.
Excuse me Jin, but according to the README file of version 2.6.0 of the driver, PAL is not fully supported. Known limitations: .. .. - Gray output with integrated TV-out and PAL TVs.
Sorry, the README has been deprecated, and thanks for your reminder I'll see how we could improve it. The latest known issues are listed at http://intellinuxgraphics.org/2008Q4.html.
What's your schedule about this issue (PAL in colour) ?
(In reply to comment #4) > What's your schedule about this issue (PAL in colour) ? > comment#1 is still valid -- I meant it's already supported in current driver. Just README is wrong.
Hi Jin, I am still having problem with this one. I have compiled version 2.6.0 of the driver and I can't get PAL out on my TV in color. Please find details about my setup 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Compaq 6710b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at e4600000 (64-bit, non-prefetchable) [size=1M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 4000 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable- Capabilities: [d0] Power Management version 3 Kernel modules: intelfb -- linux:/home/issa/Desktop # uname -a Linux linux 2.6.27.19-3.2-default #1 SMP 2009-02-25 15:40:44 +0100 i686 i686 i386 GNU/Linux -- linux:/home/issa/Desktop # pkg-config --modversion libdrm 2.4.7 -- linux:/home/issa/Desktop # xrandr --verbose Screen 0: minimum 320 x 200, current 2320 x 1050, maximum 3840 x 1200 VGA disconnected (normal left inverted right x axis y axis) Identifier: 0x3b Timestamp: 5999457 Subpixel: unknown Clones: CRTCs: 0 1 1024x768_60 (0x8a) 64.1MHz -HSync +VSync h: width 1024 start 1080 end 1184 total 1344 skew 0 clock 47.7KHz v: height 768 start 769 end 772 total 795 clock 60.0Hz LVDS connected 1680x1050+0+0 (0x3e) normal (normal left inverted right x axis y axis) 331mm x 207mm Identifier: 0x3c Timestamp: 5999457 Subpixel: horizontal rgb Clones: CRTC: 1 CRTCs: 1 EDID_DATA: 00ffffffffffff00320c00cd00000000 00100103802115780a19459758538b28 24505400000001010101010101010101 010101010101a82f90e0601a10402040 13004bcf100000190000000000000000 00000000000000000000000000fe004c 475068696c6970734c43440a000000fe 004c503135345745322d544c41310035 PANEL_FITTING: full_aspect supported: center full_aspect full BACKLIGHT_CONTROL: kernel supported: native legacy combination kernel BACKLIGHT: 0 (0x00000000) range: (0,10) 1680x1050 (0x3e) 122.0MHz -HSync -VSync *current +preferred h: width 1680 start 1712 end 1776 total 1904 skew 0 clock 64.1KHz v: height 1050 start 1051 end 1054 total 1066 clock 60.1Hz 1680x1050 (0x3f) 147.1MHz h: width 1680 start 1784 end 1968 total 2256 skew 0 clock 65.2KHz v: height 1050 start 1051 end 1054 total 1087 clock 60.0Hz 1680x1050 (0x40) 117.0MHz +HSync -VSync h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 63.6KHz v: height 1050 start 1053 end 1059 total 1080 clock 58.9Hz 1400x1050 (0x41) 122.0MHz +HSync +VSync h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.9KHz v: height 1050 start 1052 end 1064 total 1082 clock 60.0Hz 1280x1024 (0x42) 108.0MHz +HSync +VSync h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x960 (0x43) 108.0MHz +HSync +VSync h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz v: height 960 start 961 end 964 total 1000 clock 60.0Hz 1024x768 (0x44) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x45) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x46) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x47) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz TV connected 640x480+1680+0 (0x4b) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x3d Timestamp: 5999457 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 1 BOTTOM: 37 (0x00000025) range: (0,100) RIGHT: 46 (0x0000002e) range: (0,100) TOP: 36 (0x00000024) range: (0,100) LEFT: 54 (0x00000036) range: (0,100) TV_FORMAT: PAL supported: NTSC-M NTSC-443 NTSC-J PAL-M PAL-N PAL 1024x768 (0x48) 22.4MHz h: width 1024 start 1025 end 1088 total 1120 skew 0 clock 20.0KHz v: height 768 start 769 end 800 total 801 clock 25.0Hz 800x600 (0x49) 14.2MHz h: width 800 start 801 end 864 total 896 skew 0 clock 15.8KHz v: height 600 start 601 end 632 total 633 clock 25.0Hz 848x480 (0x4a) 12.1MHz h: width 848 start 849 end 912 total 944 skew 0 clock 12.8KHz v: height 480 start 481 end 512 total 513 clock 25.0Hz 640x480 (0x4b) 9.4MHz *current h: width 640 start 641 end 704 total 736 skew 0 clock 12.8KHz v: height 480 start 481 end 512 total 513 clock 25.0Hz -- Xorg.0.log attached -- The TV display is BW. Could you confirm the support for PAL in color is in v2.6.0 or not. Thx Issa
Created attachment 24728 [details] Xorg log
PAL is supported -- it runs fine on my TV with s-video connection. What kind of TV connector are you using? (s-video, component=YPbPr, composite)
Well, I am using a svideo to rca cable (svideo from PC, composite on TV). I tested the cable with a DVD player known to deliver color on the TV through SCART with my cable. I was also outputing BW images. But I had already reponed this bug. So I wonder know if the cable is not the problem. What I can try is the following, I have a svideo/svideo cable and a scart/svideo/composite adapter. I will try it and post the result of my test. Keep you posted. Thx
I'm closing the bug because I can't get a decent SVIDEO to RCA cable. I can't make any further input on this one and am simply giving up. Thx anyway
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.