Created attachment 117590 [details]
dmesg.log when star system

dmesg log attached

Created attachment 117591 [details]
xorg.log when system start

Created attachment 117592 [details]
glxinfo | grep OpenGL

Created attachment 117593 [details]
Screenshot_with_graphical_artifacts.png

Is there anything I can do to help fix this?
If I have to do something, please let me simple steps that I can faster do and reply to your request.

Is this a regression, i.e. did it work correctly with older versions of the graphics driver stack?

Does either of these options in /etc/X11/xorg.conf work around the problem?

 Option "ColorTiling2D" "off"
 Option "ColorTiling" "off"

Created attachment 117617 [details]
xorg.log when system start after disabled ColorTilling

Adding option
 Option "ColorTiling2D" "off"
 Option "ColorTiling" "off"
to Xorg.conf not work for me, problem still exists.

You may have a hawaii with harvested RBs.  Can you try this branch of mesa?
http://cgit.freedesktop.org/~mareko/mesa/log/?h=amdgpu

I did next steps:
1. git clone git://people.freedesktop.org/~mareko/mesa
2. git checkout amdgpu
3. sh autohen.sh
4. make

Then I move all files from git/mesa/lib and git/mesa/lib/gllium to /lib and /lib/gallium
but I'm not sure that it is correct.

After this changes I restart system and I see desktop without artifacts

But now OpenGL application not started and I cannot run glxinfo (see error: ouldn't find RGB GLX visual or fbconfig)

Also I see 'Screen Tearing'.

Maybe need do something else? (I think replacement of libraries by hands - it was a bad idea)

Created attachment 117620 [details]
dmesf after replase mesa lib from git branch amdgpu

Created attachment 117621 [details]
Xorg.0.log after replase mesa lib from git branch amdgpu

(In reply to Roman from comment #9)
> Then I move all files from git/mesa/lib and git/mesa/lib/gllium to /lib and
> /lib/gallium
> but I'm not sure that it is correct.

Possibly not. Which files did you move where exactly?

(In reply to Michel Dänzer from comment #12)
> (In reply to Roman from comment #9)
> > Then I move all files from git/mesa/lib and git/mesa/lib/gllium to /lib and
> > /lib/gallium
> > but I'm not sure that it is correct.
> 
> Possibly not. Which files did you move where exactly?

I replace from:
builds_from_git/mesa/lib/
libglapi.so
libglapi.so.0
libglapi.so.0.0.0      
libGLESv1_CM.so
libGLESv1_CM.so.1
libGLESv1_CM.so.1.1.0
libGLESv2.so
libGLESv2.so.2
libGLESv2.so.2.0.0
i915_dri.so      
i965_dri.so    
mesa_dri_drivers.so
nouveau_vieux_dri.so
r200_dri.so
radeon_dri.so
swrast_dri.so
libGL.so
libGL.so.1
libGL.so.1.2.0
libEGL.so
libEGL.so.1
libEGL.so.1.0.0

To MySystemRoot/lib/

And from builds_from_git/mesa/lib/gallium/
kms_swrast_dri.so
r300_dri.so
r600_dri.so
swrast_dri.so
vmwgfx_dri.so
libvdpau_r300.so
libvdpau_r300.so.1
libvdpau_r300.so.1.0
libvdpau_r300.so.1.0.0
libvdpau_r600.so
libvdpau_r600.so.1
libvdpau_r600.so.1.0
libvdpau_r600.so.1.0.0
To MySystemRoot/lib/gallium/

(In reply to Michel Dänzer from comment #6)
> Is this a regression, i.e. did it work correctly with older versions of the
> graphics driver stack?

Also I try boot from iso Fedora 22 or Ubuntu 14.10 with default driver stack (mesa not higher 10.6) and I get the same result (desktop with graphical artifacts)

(In reply to Roman from comment #13)
> And from builds_from_git/mesa/lib/gallium/
> kms_swrast_dri.so
> r300_dri.so
> r600_dri.so
> swrast_dri.so
> vmwgfx_dri.so

You're missing radeonsi_dri.so, the 3D driver for your GPU. Try passing at least the following parameters to configure / autogen.sh:

--with-gallium-drivers=radeonsi --enable-glx-tls --with-egl-platforms=x11,drm --with-dri-drivers=''


> To MySystemRoot/lib/gallium/

Note that files in .../lib/gallium/ aren't picked up by default at runtime. It might be easier if you run make install instead of copying files manually.

(In reply to Michel Dänzer from comment #15)
> (In reply to Roman from comment #13)
> > And from builds_from_git/mesa/lib/gallium/
> > kms_swrast_dri.so
> > r300_dri.so
> > r600_dri.so
> > swrast_dri.so
> > vmwgfx_dri.so
> 
> You're missing radeonsi_dri.so, the 3D driver for your GPU. Try passing at
> least the following parameters to configure / autogen.sh:
> 
> --with-gallium-drivers=radeonsi --enable-glx-tls
> --with-egl-platforms=x11,drm --with-dri-drivers=''
> 
> 
> > To MySystemRoot/lib/gallium/
> 
> Note that files in .../lib/gallium/ aren't picked up by default at runtime.
> It might be easier if you run make install instead of copying files manually.

I did new build with parametrs and run make install automatically moved radeonsi_dri.so to /usr/local/lib/dri/ but nothing has changed and still loading "radeon" module.

May be move 'radeonsi_dri.so' to /lib ?

(In reply to Roman from comment #16)
> I did new build with parametrs and run make install automatically moved
> radeonsi_dri.so to /usr/local/lib/dri/ but nothing has changed and still
> loading "radeon" module.

The Xorg driver is radeon_drv.so.

One issue might be that Xorg only looks for *_dri.so in /usr/lib/dri/ for GLX support. Maybe try copying radeonsi_dri.so to /usr/lib/dri/ as well or creating a symlink. If that doesn't help, please attach the current Xorg.0.log file.

Created attachment 117675 [details]
Xorg.0.Log (WW) Warning, couldn't open module radeonsi

(In reply to Michel Dänzer from comment #17)
> (In reply to Roman from comment #16)
> > I did new build with parametrs and run make install automatically moved
> > radeonsi_dri.so to /usr/local/lib/dri/ but nothing has changed and still
> > loading "radeon" module.
> 
> The Xorg driver is radeon_drv.so.
> 
> One issue might be that Xorg only looks for *_dri.so in /usr/lib/dri/ for
> GLX support. Maybe try copying radeonsi_dri.so to /usr/lib/dri/ as well or
> creating a symlink. If that doesn't help, please attach the current
> Xorg.0.log file.

I move radeon_drv.so to /usr/lib/dri/ and change Xorg.config:
Section "Device"
        Identifier "Radeon R9290 (Hawaii)"
        Driver "radeonsi"
EndSection

But driver not load:
[     9.003] (II) LoadModule: "radeonsi"
[     9.003] (WW) Warning, couldn't open module radeonsi
[     9.003] (II) UnloadModule: "radeonsi"

>>I move radeon_drv.so to /usr/lib/dri/ and change Xorg.config:
this typo, I successfully moved radeonSI_drv.so to /usr/lib/dri/

(In reply to Roman from comment #18)
> [     9.003] (II) LoadModule: "radeonsi"
> [     9.003] (WW) Warning, couldn't open module radeonsi
> [     9.003] (II) UnloadModule: "radeonsi"

There is no "radeonsi" Xorg driver, change it back to "radeon".

There is an LLVM bug affecting Hawaii. Please switch to the release_37 LLVM branch, which reverts the broken commit. The master branch (LLVM 3.8) still has the bug.

(In reply to Marek Olšák from comment #21)
> There is an LLVM bug affecting Hawaii. Please switch to the release_37 LLVM
> branch, which reverts the broken commit. The master branch (LLVM 3.8) still
> has the bug.

I could not find to 'release 37 commit' to do reset it for git (http://llvm.org/git/llvm.git
)

I use default repo in manjaro with llvm 3.6.2.2

Created attachment 117695 [details]
Xorg.0.log - fail on start

(In reply to Michel Dänzer from comment #20)
> (In reply to Roman from comment #18)
> > [     9.003] (II) LoadModule: "radeonsi"
> > [     9.003] (WW) Warning, couldn't open module radeonsi
> > [     9.003] (II) UnloadModule: "radeonsi"
> 
> There is no "radeonsi" Xorg driver, change it back to "radeon".

I think I all broke. (see Xorg.0.log fail on start)

How I can properly to install mesa from git?

Correct my steps:
1. git clone git://anongit.freedesktop.org/mesa/drm
2. change branch to amdpu
3. sh autohen.sh --enable-libdrm_amdgpu
4. make
5. make install

6. git clone git://people.freedesktop.org/~mareko/mesa
7. change branch to amdgpu
8. sh autohen.sh --with-gallium-drivers=radeonsi --enable-glx-tls --with-egl-platforms=x11,drm --with-dri-drivers=''
9. make install

10. add 20-radeon.conf to X11/xorg.conf.d/
Section "Module"
        Load  "dri2"
        Load  "glamoregl"
EndSection

Section "Device"
        Identifier "Radeon R9 290 (Hawaii)"
        Driver "radeon"
        Option "AccelMethod"  "glamor"
        Option "ColorTiling2D" "off"
        Option "ColorTiling"   "off"
EndSection
11. Restart System.


By the way my Manjaro became available kernel 4.2.rc5 install it?

Also I saw xf86-video-amdgpu I need build it?

P.S. Sorry if my questions are stupid, I'm not good at Linux (just trying to use it)

It's the "release_37" llvm branch.

(In reply to Roman from comment #23)
> I think I all broke. (see Xorg.0.log fail on start)

Looks like either /usr/local/lib/libEGL.so.1 was built without --with-egl-platforms=[...,]drm[,...] , or maybe the $DISPLAY environment variable is set for the Xorg process.


> 1. git clone git://anongit.freedesktop.org/mesa/drm
> 2. change branch to amdpu

The amdgpu branch has been merged to master, please use the latter now.


> 3. sh autohen.sh --enable-libdrm_amdgpu

This parameter isn't necessary.


> 6. git clone git://people.freedesktop.org/~mareko/mesa
> 7. change branch to amdgpu

This branch has been merged to the master branch of git://anongit.freedesktop.org/mesa/mesa , please use that now.


> 8. sh autohen.sh --with-gallium-drivers=radeonsi --enable-glx-tls
> --with-egl-platforms=x11,drm --with-dri-drivers=''

Maybe try --with-egl-platforms=drm instead of --with-egl-platforms=x11,drm for now.


> 10. add 20-radeon.conf to X11/xorg.conf.d/

xorg.conf.d/ is for packages shipping configuration snippets. Users should just modify or create /etc/X11/xorg.conf.


> Section "Module"
>         Load  "dri2"
>         Load  "glamoregl"
> EndSection

This section isn't necessary anymore.


> By the way my Manjaro became available kernel 4.2.rc5 install it?

Maybe better not, at least until you have X working again.


> Also I saw xf86-video-amdgpu I need build it?

No.

(In reply to Marek Olšák from comment #24)
> It's the "release_37" llvm branch.

I builded LLVM 3.7 (branch 37) but I don't know how set this dir for mesa autogen.sh script.
Maybe there is a parameter in which I can point the path to LLVM directory with binaries?

(In reply to Roman from comment #26)
> Maybe there is a parameter in which I can point the path to LLVM directory
> with binaries?

--with-llvm-prefix=/path/to/llvm (for llvm-config in /path/to/llvm/bin/llvm-config)

When I try build mesa from git://anongit.freedesktop.org/mesa/mesa with LLVM 3.7.0
I have error:
OC state_tracker/st_cb_feedback.lo
<commandline>:0:11:error:hexadecimal floating constants require an exponent
../../src/gallium/auxiliary/draw/draw_context.h:67:5:note: in expansion of macro 'HAVE_LLVM'
#if HAVE_LLVM

Please attach the output of "make V=1".

Created attachment 117773 [details]
Mesa make V=1

(In reply to Michel Dänzer from comment #29)
> Please attach the output of "make V=1".

done, log attached

Looks like the Mesa configure script fails to parse the version number of your LLVM build correctly. That would need to be tracked in a separate bug report.

Meanwhile, the default LLVM of Manjaro should be fine for the purpose of this bug report. Can you build Mesa against that?

(In reply to Michel Dänzer from comment #31)
> Looks like the Mesa configure script fails to parse the version number of
> your LLVM build correctly. That would need to be tracked in a separate bug
> report.
> 
> Meanwhile, the default LLVM of Manjaro should be fine for the purpose of
> this bug report. Can you build Mesa against that?

Build successfully constructed with LLVM 3.6.2.0 (from default repo)
and I did make install for it -> reboot system

But I still see graphic artifacts. 
glxinfo say that I use: OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.6.4

May be need add something else in some config that started with builded mesa?

(In reply to Roman from comment #32)
> glxinfo say that I use: OpenGL ES profile version string: OpenGL ES 3.0 Mesa
> 10.6.4

So it's not picking up your Mesa build yet. Please attach the current Xorg.0.log file and provide the output of "LIBGL_DEBUG=verbose glxinfo | grep ' render'".

Created attachment 117792 [details]
Xorg.0.log - after make and make install

(In reply to Michel Dänzer from comment #33)
> (In reply to Roman from comment #32)
> > glxinfo say that I use: OpenGL ES profile version string: OpenGL ES 3.0 Mesa
> > 10.6.4
> 
> So it's not picking up your Mesa build yet. Please attach the current
> Xorg.0.log file and provide the output of "LIBGL_DEBUG=verbose glxinfo |
> grep ' render'".

$LIBGL_DEBUG=verbose glxinfo | grep ' render'
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/radeonsi_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/radeonsi_dri.so
libGL: Can't open configuration file /home/roman/.drirc: No such file or directory.
libGL: Can't open configuration file /home/roman/.drirc: No such file or directory.
libGL: Using DRI2 for screen 0
direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on AMD HAWAII

All builded mesa library after make install moved to usr/local/lib/

Looks like you need to make sure your self-built libGL.so.1 is picked up from /usr/local/lib by adding /usr/local/lib to /etc/ld.so.conf* and/or running ldconfig.

Created attachment 117800 [details]
Xorg.0.log - after added config to /ect/ld.so.conf.d

(In reply to Michel Dänzer from comment #36)
> Looks like you need to make sure your self-built libGL.so.1 is picked up
> from /usr/local/lib by adding /usr/local/lib to /etc/ld.so.conf* and/or
> running ldconfig.

I added two config to /ect/ld.so.conf.d for path /usr/local/lib and /usr/local/lib/dri
But nothing changes

(In reply to Roman from comment #37)
> I added two config to /ect/ld.so.conf.d for path /usr/local/lib and
> /usr/local/lib/dri

Only /usr/local/lib is needed in the ld.so configuration.

> But nothing changes

Did you run ldconfig after changing the ld.so configuration?

Created attachment 117826 [details]
Xorg.0.log - after ldconfig and reboot (black screen)

(In reply to Michel Dänzer from comment #38)
> Did you run ldconfig after changing the ld.so configuration?
I forgot. I run ldconfig and restart system and after it I see black screen. 

/var/log/dmesg doesn't exist (probably due systemd)

I revert changes in /ect/ld.so.conf via chroot.

Created attachment 118318 [details]
OpenSuse_Mesa_11_libdrm_2.4_LLVM_3.8

Hello again, I tried boot from prepare image (http://www.gearsongallium.com/?p=2396) with next components:
openSUSE – Factory
Mesa-git – 11.1_git2015.08.29
Kernel – 4.2-rc8
libdrm – 2.4.99_git2015.08.19
Mesa-demos – 9.1.0_git2015.02.28
wine – 1.7.50-gallium-nine+staging (use WINEARCH=win32 winecfg)
xorg-server – 1.17.99
xf86-video-ati – 7.99.99_2015.08.22 with dri3 and TearFree (activated manually)
xf86-video-amdgpu – 0.0.1_2015.08.19
xf86-video-intel – 2.99.99_2015.08.22
xf86-video-nouveau – 1.1.99_2015.07.20
KDE – 5.14.0
LLVM – 3.8svn (SI machine scheduler)

And I get same result with graphical artifacts, but more stronger (see photo)

#31 Where is the separate bug? I can't rebuild Mesa 9.0.3 in my SLED 11 SP4 using LLVM 3.8.0!

Created attachment 125762 [details]
Build log.

This is a build log. I tried to apply this patch: https://llvm.org/bugs/show_bug.cgi?id=20903 Comment #5

There is a repository: https://build.opensuse.org/package/show/home:linux4humans:qt5/Mesa

-- GitLab Migration Automatic Message --

This bug has been migrated to freedesktop.org's GitLab instance and has been closed from further activity.

You can subscribe and participate further through the new bug through this link to our GitLab instance: https://gitlab.freedesktop.org/xorg/driver/xf86-video-ati/issues/138.