IGT-Version: 1.13-g51e965f (x86_64) (Linux: 4.4.0-gfxbench+ x86_64) Test requirement not met in function test_read_crc, file kms_pipe_crc_basic.c:227: Test requirement: valid_connectors No connector found for pipe 1 Subtest nonblocking-crc-pipe-B: SKIP (0.000s) All the other very similar tests passed just fine. Looking at the results file we see it ran drv_module_reload just prior to this test, so perhaps we have some problem where we fail to probe the modes during driver load?
And naturally I forgot the link to the results: /archive/results/CI_IGT_test/Patchwork_1224/
Maybe related to bug #93769?
The bug is not present with following configuration: --- Software information --- ++ Kernel version : 4.4.4-040404-generic ++ Linux distribution : Ubuntu 15.10 ++ Architecture : 64-bit ++ xf86-video-intel version : 2.99.917 ++ Xorg-Xserver version : 1.17.2 ++ DRM version : 2.4.64 ++ VAAPI version : Intel i965 driver for Intel(R) Broadwell - 1.6.0 ++ Cairo version : 1.14.2 ++ Intel GPU Tools version : Tag [intel-gpu-tools-1.14-74-g431f6c4] / Commit [431f6c4] ++ Kernel driver in use : i915 ++ Bios revision : 5.6 --- Hardware information --- ++ Platform : ++ Motherboard model : ++ Motherboard type : NUC5i7RYB Desktop ++ Motherboard manufacturer : ++ CPU family : Core i7 ++ CPU information : Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz ++ GPU Card : Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) ++ Memory ram : 8 GB ++ Maximum memory ram allowed : 16 GB ++ Display resolution : ++ CPU's number : 4 ++ Hard drive capacity : 120 GB Output: ./kms_pipe_crc_basic IGT-Version: 1.14-g431f6c4 (x86_64) (Linux: 4.4.4-040404-generic x86_64) Subtest bad-pipe: SUCCESS (0.000s) Subtest bad-source: SUCCESS (0.000s) Subtest bad-nb-words-1: SUCCESS (0.000s) Subtest bad-nb-words-3: SUCCESS (0.000s) read-crc-pipe-A: Testing connector HDMI-A-1 using pipe A read-crc-pipe-A: Testing connector DP-1 using pipe A Subtest read-crc-pipe-A: SUCCESS (1.576s) read-crc-pipe-A-frame-sequence: Testing connector HDMI-A-1 using pipe A read-crc-pipe-A-frame-sequence: Testing connector DP-1 using pipe A Subtest read-crc-pipe-A-frame-sequence: SUCCESS (2.684s) nonblocking-crc-pipe-A: Testing connector HDMI-A-1 using pipe A nonblocking-crc-pipe-A: Testing connector DP-1 using pipe A Subtest nonblocking-crc-pipe-A: SUCCESS (1.733s) nonblocking-crc-pipe-A-frame-sequence: Testing connector HDMI-A-1 using pipe A nonblocking-crc-pipe-A-frame-sequence: Testing connector DP-1 using pipe A Subtest nonblocking-crc-pipe-A-frame-sequence: SUCCESS (1.695s) rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Mar 17 17:05:00 2016 suspend-read-crc-pipe-A: Testing connector HDMI-A-1 using pipe A suspend-read-crc-pipe-A: Testing connector DP-1 using pipe A Subtest suspend-read-crc-pipe-A: SUCCESS (2.826s) hang-read-crc-pipe-A: Testing connector DP-1 using pipe A Subtest hang-read-crc-pipe-A: SUCCESS (6.151s) read-crc-pipe-B: Testing connector HDMI-A-1 using pipe B read-crc-pipe-B: Testing connector DP-1 using pipe B Subtest read-crc-pipe-B: SUCCESS (1.212s) read-crc-pipe-B-frame-sequence: Testing connector HDMI-A-1 using pipe B read-crc-pipe-B-frame-sequence: Testing connector DP-1 using pipe B Subtest read-crc-pipe-B-frame-sequence: SUCCESS (1.180s) nonblocking-crc-pipe-B: Testing connector HDMI-A-1 using pipe B nonblocking-crc-pipe-B: Testing connector DP-1 using pipe B Subtest nonblocking-crc-pipe-B: SUCCESS (1.181s) nonblocking-crc-pipe-B-frame-sequence: Testing connector HDMI-A-1 using pipe B nonblocking-crc-pipe-B-frame-sequence: Testing connector DP-1 using pipe B Subtest nonblocking-crc-pipe-B-frame-sequence: SUCCESS (1.184s) rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Mar 17 17:05:24 2016 suspend-read-crc-pipe-B: Testing connector HDMI-A-1 using pipe B suspend-read-crc-pipe-B: Testing connector DP-1 using pipe B Subtest suspend-read-crc-pipe-B: SUCCESS (2.145s) hang-read-crc-pipe-B: Testing connector DP-1 using pipe B Subtest hang-read-crc-pipe-B: SUCCESS (4.934s) read-crc-pipe-C: Testing connector HDMI-A-1 using pipe C read-crc-pipe-C: Testing connector DP-1 using pipe C Subtest read-crc-pipe-C: SUCCESS (1.195s) read-crc-pipe-C-frame-sequence: Testing connector HDMI-A-1 using pipe C read-crc-pipe-C-frame-sequence: Testing connector DP-1 using pipe C Subtest read-crc-pipe-C-frame-sequence: SUCCESS (1.184s) nonblocking-crc-pipe-C: Testing connector HDMI-A-1 using pipe C nonblocking-crc-pipe-C: Testing connector DP-1 using pipe C Subtest nonblocking-crc-pipe-C: SUCCESS (1.181s) nonblocking-crc-pipe-C-frame-sequence: Testing connector HDMI-A-1 using pipe C nonblocking-crc-pipe-C-frame-sequence: Testing connector DP-1 using pipe C Subtest nonblocking-crc-pipe-C-frame-sequence: SUCCESS (1.180s) rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Mar 17 17:05:42 2016 suspend-read-crc-pipe-C: Testing connector HDMI-A-1 using pipe C suspend-read-crc-pipe-C: Testing connector DP-1 using pipe C Subtest suspend-read-crc-pipe-C: SUCCESS (2.343s) hang-read-crc-pipe-C: Testing connector HDMI-A-1 using pipe C hang-read-crc-pipe-C: Testing connector DP-1 using pipe C Subtest hang-read-crc-pipe-C: SUCCESS (6.699s)
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.