Created attachment 124071 [details] intel_reg dump kernel: 4.6.0+ source: git://anongit.freedesktop.org/drm-intel branch: drm-intel-nightly commit: 8621fb5af862648269427c20fff64f0a3a3bc406 drm-intel-nightly: 2016y-05m-23d-18h-18m-33s UTC integration manifest Linux distribution: NAME="Ubuntu" VERSION="16.04 LTS (Xenial Xerus)" ID=ubuntu ID_LIKE=debian UBUNTU_CODENAME=xenial Machine information: OpenGL renderer string: Mesa DRI Intel(R) Iris Pro Graphics P580 (Skylake GT4e) VGA compatible controller: Intel Corporation Device 193a (rev 09) Display connector: DP2 connected primary 1920x1080+0+0 Reproduce steps: Get xonotic 1.2.0 from Phoronix Test Suite using command: vblank_mode=0 ./xonotic-linux-glx.sh -nohome -benchmark demos/the-big-keybench +r_glsl 1 +vid_width 1920 +vid_height 1080 +exec effects-ultimate.cfg ./xonotic-linux-glx.sh -nohome -benchmark demos/the-big-keybench +r_glsl 1 +vid_width 1920 +vid_height 1080 +exec effects-ultimate.cfg Result: Application report: intel_do_flush_locked failed: Input/output error dmesg: [ 3002.797779] [drm] stuck on render ring [ 3002.798080] [drm] GPU HANG: ecode 9:0:0x85dffffb, in xonotic-linux64 [3387], reason: Engine(s) hung, action: reset [ 3002.798081] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 3002.798082] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 3002.798083] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 3002.798083] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 3002.798084] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 3002.799752] drm/i915: Resetting chip after gpu hang [ 3002.799836] [drm] GuC firmware load failed: -5 [ 3004.798247] [drm] RC6 on [ 3012.802309] [drm] stuck on render ring [ 3012.802641] [drm] GPU HANG: ecode 9:0:0xfffffffe, in xonotic-linux64 [3387], reason: Engine(s) hung, action: reset [ 3012.804124] drm/i915: Resetting chip after gpu hang [ 3012.804246] [drm] GuC firmware load failed: -5 [ 3014.798475] [drm] RC6 on /var/log/Xorg.0.log: [ 3.846] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 3.846] X Protocol Version 11, Revision 0 [ 3.846] Build Operating System: Linux 3.13.0-85-generic x86_64 Ubuntu [ 3.846] Current Operating System: Linux igvtperf-efi 4.6.0+ #1 SMP Wed May 25 09:21:42 CST 2016 x86_64 [ 3.846] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0+ root=UUID=53f3b514-695b-493c-a612-e85f3146c1d5 ro quiet splash consoleblank=0 net.ifnames=0 biosdevname=0 vt.handoff=7 [ 3.846] Build Date: 07 April 2016 09:18:50AM [ 3.846] xorg-server 2:1.18.3-1ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 3.846] Current version of pixman: 0.33.6 [ 3.846] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3.846] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3.846] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 25 13:32:54 2016 [ 3.847] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3.848] (==) No Layout section. Using the first Screen section. [ 3.848] (==) No screen section available. Using defaults. [ 3.848] (**) |-->Screen "Default Screen Section" (0) [ 3.848] (**) | |-->Monitor "<default monitor>" [ 3.848] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3.848] (==) Automatically adding devices [ 3.848] (==) Automatically enabling devices [ 3.848] (==) Automatically adding GPU devices [ 3.848] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 3.848] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3.848] Entry deleted from font path. [ 3.848] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 3.848] Entry deleted from font path. [ 3.848] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 3.848] Entry deleted from font path. [ 3.848] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 3.848] Entry deleted from font path. [ 3.848] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 3.848] Entry deleted from font path. [ 3.848] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 3.848] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 3.848] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3.848] (II) Loader magic: 0x55ab6aa5eda0 [ 3.848] (II) Module ABI versions: [ 3.848] X.Org ANSI C Emulation: 0.4 [ 3.848] X.Org Video Driver: 20.0 [ 3.848] X.Org XInput driver : 22.1 [ 3.848] X.Org Server Extension : 9.0 [ 3.849] (++) using VT number 7 [ 3.849] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 3.849] (II) xfree86: Adding drm device (/dev/dri/card0) [ 3.883] (--) PCI:*(0:0:2:0) 8086:193a:8086:2212 rev 9, Mem @ 0xc0000000/16777216, 0xa0000000/536870912, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 3.883] (II) LoadModule: "glx" [ 3.884] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3.890] (II) Module glx: vendor="X.Org Foundation" [ 3.890] compiled for 1.18.3, module version = 1.0.0 [ 3.890] ABI class: X.Org Server Extension, version 9.0 [ 3.890] (==) AIGLX enabled [ 3.890] (==) Matched intel as autoconfigured driver 0 [ 3.890] (==) Matched intel as autoconfigured driver 1 [ 3.890] (==) Matched modesetting as autoconfigured driver 2 [ 3.890] (==) Matched fbdev as autoconfigured driver 3 [ 3.890] (==) Matched vesa as autoconfigured driver 4 [ 3.890] (==) Assigned the driver to the xf86ConfigLayout [ 3.890] (II) LoadModule: "intel" [ 3.890] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3.893] (II) Module intel: vendor="X.Org Foundation" [ 3.893] compiled for 1.18.1, module version = 2.99.917 [ 3.893] Module class: X.Org Video Driver [ 3.893] ABI class: X.Org Video Driver, version 20.0 [ 3.893] (II) LoadModule: "modesetting" [ 3.893] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3.893] (II) Module modesetting: vendor="X.Org Foundation" [ 3.894] compiled for 1.18.3, module version = 1.18.3 [ 3.894] Module class: X.Org Video Driver [ 3.894] ABI class: X.Org Video Driver, version 20.0 [ 3.894] (II) LoadModule: "fbdev" [ 3.894] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3.894] (II) Module fbdev: vendor="X.Org Foundation" [ 3.894] compiled for 1.18.1, module version = 0.4.4 [ 3.894] Module class: X.Org Video Driver [ 3.894] ABI class: X.Org Video Driver, version 20.0 [ 3.894] (II) LoadModule: "vesa" [ 3.894] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3.894] (II) Module vesa: vendor="X.Org Foundation" [ 3.894] compiled for 1.18.1, module version = 2.3.4 [ 3.895] Module class: X.Org Video Driver [ 3.895] ABI class: X.Org Video Driver, version 20.0 [ 3.895] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 3.895] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 3.895] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 3.895] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 3.895] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3.895] (II) FBDEV: driver for framebuffer: fbdev [ 3.895] (II) VESA: driver for VESA chipsets: vesa [ 3.904] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160522 [ 3.904] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <tjaalton@debian.org>) [ 3.904] (II) intel(0): SNA compiled for use with valgrind [ 3.904] (WW) Falling back to old probe method for modesetting [ 3.904] (WW) Falling back to old probe method for fbdev [ 3.904] (II) Loading sub module "fbdevhw" [ 3.904] (II) LoadModule: "fbdevhw" [ 3.905] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3.905] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3.905] compiled for 1.18.3, module version = 0.0.2 [ 3.905] ABI class: X.Org Video Driver, version 20.0 [ 3.905] (WW) Falling back to old probe method for vesa [ 3.905] (--) intel(0): gen9 engineering sample [ 3.905] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads [ 3.905] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 3.905] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 3.905] (==) intel(0): RGB weight 888 [ 3.905] (==) intel(0): Default visual is TrueColor [ 3.906] (II) intel(0): Output DP1 has no monitor section [ 3.906] (II) intel(0): Enabled output DP1 [ 3.906] (II) intel(0): Output HDMI1 has no monitor section [ 3.906] (II) intel(0): Enabled output HDMI1 [ 3.906] (II) intel(0): Output HDMI2 has no monitor section [ 3.906] (II) intel(0): Enabled output HDMI2 [ 3.906] (II) intel(0): Output DP2 has no monitor section [ 3.906] (II) intel(0): Enabled output DP2 [ 3.906] (II) intel(0): Output HDMI3 has no monitor section [ 3.906] (II) intel(0): Enabled output HDMI3 [ 3.906] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 3.906] (II) intel(0): Output VIRTUAL1 has no monitor section [ 3.906] (II) intel(0): Enabled output VIRTUAL1 [ 3.906] (--) intel(0): Output DP2 using initial mode 1920x1080 on pipe 0 [ 3.906] (==) intel(0): TearFree disabled [ 3.906] (==) intel(0): DPI set to (96, 96) [ 3.906] (II) Loading sub module "dri2" [ 3.906] (II) LoadModule: "dri2" [ 3.906] (II) Module "dri2" already built-in [ 3.906] (II) Loading sub module "present" [ 3.906] (II) LoadModule: "present" [ 3.906] (II) Module "present" already built-in [ 3.906] (II) UnloadModule: "modesetting" [ 3.906] (II) Unloading modesetting [ 3.906] (II) UnloadModule: "fbdev" [ 3.906] (II) Unloading fbdev [ 3.906] (II) UnloadSubModule: "fbdevhw" [ 3.906] (II) Unloading fbdevhw [ 3.906] (II) UnloadModule: "vesa" [ 3.906] (II) Unloading vesa [ 3.906] (==) Depth 24 pixmap format is 32 bpp [ 3.908] (II) intel(0): SNA initialized with generic backend [ 3.908] (==) intel(0): Backing store enabled [ 3.908] (==) intel(0): Silken mouse enabled [ 3.908] (II) intel(0): HW Cursor enabled [ 3.908] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 3.909] (==) intel(0): DPMS enabled [ 3.909] (==) intel(0): Display hotplug detection enabled [ 3.909] (II) intel(0): Textured video not supported on this hardware or backend [ 3.909] (II) intel(0): [DRI2] Setup complete [ 3.909] (II) intel(0): [DRI2] DRI driver: i965 [ 3.909] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 3.909] (II) intel(0): direct rendering: DRI2 enabled [ 3.909] (II) intel(0): hardware support for Present enabled [ 3.909] (--) RandR disabled [ 3.912] (II) SELinux: Disabled on system [ 3.928] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 3.928] (II) AIGLX: enabled GLX_ARB_create_context [ 3.928] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 3.928] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 3.928] (II) AIGLX: enabled GLX_INTEL_swap_event [ 3.928] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 3.928] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 3.928] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 3.928] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 3.928] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 3.928] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 3.928] (II) AIGLX: Loaded and initialized i965 [ 3.928] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 3.930] (II) intel(0): switch to mode 1920x1080@60.0 on DP2 using pipe 0, position (0, 0), rotation normal, reflection none [ 3.930] (II) intel(0): Setting screen physical size to 508 x 285 [ 3.951] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 3.951] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 3.951] (II) LoadModule: "evdev" [ 3.951] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3.953] (II) Module evdev: vendor="X.Org Foundation" [ 3.953] compiled for 1.18.1, module version = 2.10.1 [ 3.953] Module class: X.Org XInput Driver [ 3.953] ABI class: X.Org XInput driver, version 22.1 [ 3.953] (II) Using input driver 'evdev' for 'Power Button' [ 3.953] (**) Power Button: always reports core events [ 3.953] (**) evdev: Power Button: Device: "/dev/input/event3" [ 3.953] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 3.953] (--) evdev: Power Button: Found keys [ 3.953] (II) evdev: Power Button: Configuring as keyboard [ 3.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 3.953] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 3.953] (**) Option "xkb_rules" "evdev" [ 3.953] (**) Option "xkb_model" "pc105" [ 3.953] (**) Option "xkb_layout" "us" [ 3.953] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 3.953] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 3.953] (II) Using input driver 'evdev' for 'Video Bus' [ 3.953] (**) Video Bus: always reports core events [ 3.953] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 3.953] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 3.953] (--) evdev: Video Bus: Found keys [ 3.953] (II) evdev: Video Bus: Configuring as keyboard [ 3.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5" [ 3.953] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 3.953] (**) Option "xkb_rules" "evdev" [ 3.953] (**) Option "xkb_model" "pc105" [ 3.953] (**) Option "xkb_layout" "us" [ 3.953] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 3.953] (II) No input driver specified, ignoring this device. [ 3.953] (II) This device may have been added with another device file. [ 3.954] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 3.954] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 3.954] (II) Using input driver 'evdev' for 'Power Button' [ 3.954] (**) Power Button: always reports core events [ 3.954] (**) evdev: Power Button: Device: "/dev/input/event1" [ 3.954] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 3.954] (--) evdev: Power Button: Found keys [ 3.954] (II) evdev: Power Button: Configuring as keyboard [ 3.954] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 3.954] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 3.954] (**) Option "xkb_rules" "evdev" [ 3.954] (**) Option "xkb_model" "pc105" [ 3.954] (**) Option "xkb_layout" "us" [ 3.954] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 3.954] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 3.954] (II) Using input driver 'evdev' for 'Sleep Button' [ 3.954] (**) Sleep Button: always reports core events [ 3.954] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 3.954] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 3.954] (--) evdev: Sleep Button: Found keys [ 3.954] (II) evdev: Sleep Button: Configuring as keyboard [ 3.954] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2" [ 3.954] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 3.954] (**) Option "xkb_rules" "evdev" [ 3.954] (**) Option "xkb_model" "pc105" [ 3.954] (**) Option "xkb_layout" "us" [ 3.955] (II) config/udev: Adding input device Lite-On Technology Corp. HP Basic USB Keyboard (/dev/input/event6) [ 3.955] (**) Lite-On Technology Corp. HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 3.955] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. HP Basic USB Keyboard' [ 3.955] (**) Lite-On Technology Corp. HP Basic USB Keyboard: always reports core events [ 3.955] (**) evdev: Lite-On Technology Corp. HP Basic USB Keyboard: Device: "/dev/input/event6" [ 3.955] (--) evdev: Lite-On Technology Corp. HP Basic USB Keyboard: Vendor 0x3f0 Product 0x325 [ 3.955] (--) evdev: Lite-On Technology Corp. HP Basic USB Keyboard: Found keys [ 3.955] (II) evdev: Lite-On Technology Corp. HP Basic USB Keyboard: Configuring as keyboard [ 3.955] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:03F0:0325.0001/input/input8/event6" [ 3.955] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. HP Basic USB Keyboard" (type: KEYBOARD, id 10) [ 3.955] (**) Option "xkb_rules" "evdev" [ 3.955] (**) Option "xkb_model" "pc105" [ 3.955] (**) Option "xkb_layout" "us" [ 3.955] (II) config/udev: Adding input device HID 413c:3010 (/dev/input/event7) [ 3.955] (**) HID 413c:3010: Applying InputClass "evdev pointer catchall" [ 3.955] (II) Using input driver 'evdev' for 'HID 413c:3010' [ 3.955] (**) HID 413c:3010: always reports core events [ 3.955] (**) evdev: HID 413c:3010: Device: "/dev/input/event7" [ 4.006] (--) evdev: HID 413c:3010: Vendor 0x413c Product 0x3010 [ 4.006] (--) evdev: HID 413c:3010: Found 3 mouse buttons [ 4.006] (--) evdev: HID 413c:3010: Found scroll wheel(s) [ 4.006] (--) evdev: HID 413c:3010: Found relative axes [ 4.006] (--) evdev: HID 413c:3010: Found x and y relative axes [ 4.006] (II) evdev: HID 413c:3010: Configuring as mouse [ 4.006] (II) evdev: HID 413c:3010: Adding scrollwheel support [ 4.006] (**) evdev: HID 413c:3010: YAxisMapping: buttons 4 and 5 [ 4.006] (**) evdev: HID 413c:3010: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4.006] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:413C:3010.0002/input/input9/event7" [ 4.006] (II) XINPUT: Adding extended input device "HID 413c:3010" (type: MOUSE, id 11) [ 4.006] (II) evdev: HID 413c:3010: initialized for relative axes. [ 4.006] (**) HID 413c:3010: (accel) keeping acceleration scheme 1 [ 4.006] (**) HID 413c:3010: (accel) acceleration profile 0 [ 4.006] (**) HID 413c:3010: (accel) acceleration factor: 2.000 [ 4.006] (**) HID 413c:3010: (accel) acceleration threshold: 4 [ 4.006] (II) config/udev: Adding input device HID 413c:3010 (/dev/input/mouse0) [ 4.006] (II) No input driver specified, ignoring this device. [ 4.006] (II) This device may have been added with another device file. [ 4.006] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 4.006] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 4.006] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 4.006] (**) AT Translated Set 2 keyboard: always reports core events [ 4.006] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 4.006] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 4.006] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 4.006] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 4.006] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 4.006] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 4.006] (**) Option "xkb_rules" "evdev" [ 4.006] (**) Option "xkb_model" "pc105" [ 4.006] (**) Option "xkb_layout" "us" [ 220.697] (II) AIGLX: Suspending AIGLX clients for VT switch [ 223.291] (II) AIGLX: Resuming AIGLX clients after VT switch [ 223.291] (II) intel(0): switch to mode 1920x1080@60.0 on DP2 using pipe 0, position (0, 0), rotation normal, reflection none
Created attachment 124072 [details] /sys/class/drm/card0/error file of /sys/class/drm/card0/error
Created attachment 124100 [details] dmesg with drm.debug=0x0e Sorry for forget upload this log
Resolving this issue since fix is done by upgrading with latest Mesa (see comments in bug 96175).
We have confirmed this issue disappeared on Both Ubuntu and Centos after Mesa upgrading.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.