Created attachment 129077 [details] GPU crash dump Running Fedora 25 on a Intel NUC 6i5SYH with Intel Iris Graphics 540 causes GPU hangs at right after the boot (gdm). It happens always, no chance to login. [ 304.645809] [drm] GPU HANG: ecode 9:0:0x85df7efb, in Xorg [13399], reason: Hang on render ring, action: reset [ 304.645812] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 304.645814] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 304.645816] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 304.645818] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 304.645820] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 304.647239] drm/i915: Resetting chip after gpu hang [ 304.647327] [drm] RC6 off [ 304.661856] [drm] GuC firmware load skipped [ 316.612872] drm/i915: Resetting chip after gpu hang [ 316.612957] [drm] RC6 off [ 316.629068] [drm] GuC firmware load skipped [ 359.070702] show_signal_msg: 3 callbacks suppressed [ 359.070706] gnome-session-f[13702]: segfault at 0 ip 00007f8142fa2869 sp 00007ffd40922680 error 4 in libgtk-3.so.0.2200.6[7f8142cc4000+6f6000] [ 868.601004] drm/i915: Resetting chip after gpu hang [ 868.601100] [drm] RC6 off [ 868.615126] [drm] GuC firmware load skipped [ 882.616833] drm/i915: Resetting chip after gpu hang [ 882.616926] [drm] RC6 off [ 882.628849] [drm] GuC firmware load skipped [ 963.013467] gnome-session-f[15641]: segfault at 0 ip 00007ff9c8b2d869 sp 00007fff4a834b40 error 4 in libgtk-3.so.0.2200.6[7ff9c884f000+6f6000] [ 1055.605524] drm/i915: Resetting chip after gpu hang [ 1055.605643] [drm] RC6 off [ 1055.620968] [drm] GuC firmware load skipped I tried to disable wayland and play around with different xorg config. Using "intel" as a driver did never work. It only works with the following config (but without hw acceleration): Section "Device" Identifier "Intel Graphics" Driver "modesetting" Option "AccelMethod" "uxa" EndSection >uname -a Linux nslu 4.9.3-200.fc25.x86_64 #1 SMP Fri Jan 13 01:01:13 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Monitor is connected via HDMI or Dispayport
Mathias Dietz, the error from the gpu crash dump should be fixed already in xf86-video-intel (thanks to https://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=4acd4a7d3d2f41227022fa7581cfb85a0b124eae) So I recommend to update to latest version of xf86-video-intel and then use SNA. An alternate solution is to use Glamor/modesetting, but 1st try this one. Thanks
I rebuild the fedora source rpm with the patch, but the problem still happens. In fact when using the "intel" driver it does not even detect the device (with our without patch) [ 81.834] (--) Log file renamed from "/var/lib/gdm/.local/share/xorg/Xorg.pid-11762.log" to "/var/lib/gdm/.local/share/xorg/Xorg.0.log" [ 81.834] X.Org X Server 1.19.1 Release Date: 2017-01-11 [ 81.834] X Protocol Version 11, Revision 0 [ 81.834] Build Operating System: 4.9.3-200.fc25.x86_64 [ 81.834] Current Operating System: Linux nslu 4.9.3-200.fc25.x86_64 #1 SMP Fri Jan 13 01:01:13 UTC 2017 x86_64 [ 81.834] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.3-200.fc25.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=de_DE.UTF-8 i915.enable_rc6=0 [ 81.834] Build Date: 16 January 2017 04:11:55PM [ 81.834] Build ID: xorg-x11-server 1.19.1-2.fc25 [ 81.834] Current version of pixman: 0.34.0 [ 81.834] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 81.834] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 81.834] (==) Log file: "/var/lib/gdm/.local/share/xorg/Xorg.0.log", Time: Mon Jan 23 22:58:37 2017 [ 81.834] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 81.834] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 81.835] (==) No Layout section. Using the first Screen section. [ 81.835] (==) No screen section available. Using defaults. [ 81.835] (**) |-->Screen "Default Screen Section" (0) [ 81.835] (**) | |-->Monitor "<default monitor>" [ 81.835] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 81.835] (**) | |-->Device "Intel Graphics" [ 81.835] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 81.835] (==) Automatically adding devices [ 81.835] (==) Automatically enabling devices [ 81.835] (==) Automatically adding GPU devices [ 81.835] (==) Automatically binding GPU devices [ 81.835] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 81.835] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 81.835] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 81.835] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 81.835] (II) Loader magic: 0x825e00 [ 81.835] (II) Module ABI versions: [ 81.835] X.Org ANSI C Emulation: 0.4 [ 81.835] X.Org Video Driver: 23.0 [ 81.835] X.Org XInput driver : 24.1 [ 81.835] X.Org Server Extension : 10.0 [ 81.835] (++) using VT number 1 [ 81.836] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c505 [ 81.837] (II) xfree86: Adding drm device (/dev/dri/card0) [ 81.837] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0 [ 81.839] (--) PCI:*(0:0:2:0) 8086:1926:8086:2063 rev 10, Mem @ 0xde000000/16777216, 0xd0000000/134217728, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 81.839] (II) LoadModule: "glx" [ 81.839] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 81.840] (II) Module glx: vendor="X.Org Foundation" [ 81.840] compiled for 1.19.1, module version = 1.0.0 [ 81.840] ABI class: X.Org Server Extension, version 10.0 [ 81.840] (II) LoadModule: "intel" [ 81.840] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 81.841] (II) Module intel: vendor="X.Org Foundation" [ 81.841] compiled for 1.19.1, module version = 2.99.917 [ 81.841] Module class: X.Org Video Driver [ 81.841] ABI class: X.Org Video Driver, version 23.0 [ 81.841] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 81.841] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 81.841] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 81.841] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 81.841] (EE) No devices detected. [ 81.841] (EE) Fatal server error: [ 81.841] (EE) no screens found(EE) [ 81.841] (EE) Please consult the Fedora Project support at http://wiki.x.org for help. [ 81.841] (EE) Please also check the log file at "/var/lib/gdm/.local/share/xorg/Xorg.0.log" for additional information. [ 81.841] (EE) [ 81.858] (EE) Server terminated with error (1). Closing log file. In addition I tried using glamor which does not work as well: [ 71.763] (--) Log file renamed from "/var/lib/gdm/.local/share/xorg/Xorg.pid-4369.log" to "/var/lib/gdm/.local/share/xorg/Xorg.0.log" [ 71.763] X.Org X Server 1.19.1 Release Date: 2017-01-11 [ 71.763] X Protocol Version 11, Revision 0 [ 71.763] Build Operating System: 4.9.3-200.fc25.x86_64 [ 71.763] Current Operating System: Linux nslu 4.9.3-200.fc25.x86_64 #1 SMP Fri Jan 13 01:01:13 UTC 2017 x86_64 [ 71.763] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.3-200.fc25.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=de_DE.UTF-8 i915.enable_rc6=0 [ 71.763] Build Date: 16 January 2017 04:11:55PM [ 71.763] Build ID: xorg-x11-server 1.19.1-2.fc25 [ 71.763] Current version of pixman: 0.34.0 [ 71.763] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 71.763] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 71.763] (==) Log file: "/var/lib/gdm/.local/share/xorg/Xorg.0.log", Time: Mon Jan 23 21:28:45 2017 [ 71.763] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 71.763] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 71.764] (==) No Layout section. Using the first Screen section. [ 71.764] (==) No screen section available. Using defaults. [ 71.764] (**) |-->Screen "Default Screen Section" (0) [ 71.764] (**) | |-->Monitor "<default monitor>" [ 71.764] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 71.764] (==) Automatically adding devices [ 71.764] (==) Automatically enabling devices [ 71.764] (==) Automatically adding GPU devices [ 71.764] (==) Automatically binding GPU devices [ 71.764] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 71.764] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 71.764] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 71.764] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 71.764] (II) Loader magic: 0x825e00 [ 71.764] (II) Module ABI versions: [ 71.764] X.Org ANSI C Emulation: 0.4 [ 71.764] X.Org Video Driver: 23.0 [ 71.764] X.Org XInput driver : 24.1 [ 71.764] X.Org Server Extension : 10.0 [ 71.765] (++) using VT number 1 [ 71.766] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2 [ 71.767] (II) xfree86: Adding drm device (/dev/dri/card0) [ 71.767] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0 [ 71.769] (--) PCI:*(0:0:2:0) 8086:1926:8086:2063 rev 10, Mem @ 0xde000000/16777216, 0xd0000000/134217728, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 71.769] (II) LoadModule: "glx" [ 71.769] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 71.771] (II) Module glx: vendor="X.Org Foundation" [ 71.771] compiled for 1.19.1, module version = 1.0.0 [ 71.771] ABI class: X.Org Server Extension, version 10.0 [ 71.772] (==) Matched intel as autoconfigured driver 0 [ 71.772] (==) Matched intel as autoconfigured driver 1 [ 71.772] (==) Matched modesetting as autoconfigured driver 2 [ 71.772] (==) Matched fbdev as autoconfigured driver 3 [ 71.772] (==) Matched vesa as autoconfigured driver 4 [ 71.772] (==) Assigned the driver to the xf86ConfigLayout [ 71.772] (II) LoadModule: "intel" [ 71.772] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 71.772] (II) Module intel: vendor="X.Org Foundation" [ 71.772] compiled for 1.19.1, module version = 2.99.917 [ 71.772] Module class: X.Org Video Driver [ 71.772] ABI class: X.Org Video Driver, version 23.0 [ 71.772] (II) LoadModule: "modesetting" [ 71.772] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 71.772] (II) Module modesetting: vendor="X.Org Foundation" [ 71.772] compiled for 1.19.1, module version = 1.19.1 [ 71.772] Module class: X.Org Video Driver [ 71.772] ABI class: X.Org Video Driver, version 23.0 [ 71.772] (II) LoadModule: "fbdev" [ 71.772] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 71.772] (II) Module fbdev: vendor="X.Org Foundation" [ 71.772] compiled for 1.18.99.901, module version = 0.4.3 [ 71.772] Module class: X.Org Video Driver [ 71.772] ABI class: X.Org Video Driver, version 23.0 [ 71.772] (II) LoadModule: "vesa" [ 71.772] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 71.772] (II) Module vesa: vendor="X.Org Foundation" [ 71.772] compiled for 1.18.99.901, module version = 2.3.2 [ 71.772] Module class: X.Org Video Driver [ 71.772] ABI class: X.Org Video Driver, version 23.0 [ 71.772] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 71.773] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 71.773] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 71.773] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 71.773] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 71.773] (II) FBDEV: driver for framebuffer: fbdev [ 71.773] (II) VESA: driver for VESA chipsets: vesa [ 71.773] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) [ 71.773] (II) modeset(0): using drv /dev/dri/card0 [ 71.773] (WW) Falling back to old probe method for fbdev [ 71.773] (II) Loading sub module "fbdevhw" [ 71.773] (II) LoadModule: "fbdevhw" [ 71.773] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 71.773] (II) Module fbdevhw: vendor="X.Org Foundation" [ 71.773] compiled for 1.19.1, module version = 0.0.2 [ 71.773] ABI class: X.Org Video Driver, version 23.0 [ 71.773] (EE) open /dev/fb0: Permission denied [ 71.773] (WW) Falling back to old probe method for vesa [ 71.773] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 71.773] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 71.773] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 71.773] (==) modeset(0): RGB weight 888 [ 71.773] (==) modeset(0): Default visual is TrueColor [ 71.773] (II) Loading sub module "glamoregl" [ 71.773] (II) LoadModule: "glamoregl" [ 71.773] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 71.779] (II) Module glamoregl: vendor="X.Org Foundation" [ 71.779] compiled for 1.19.1, module version = 1.0.0 [ 71.779] ABI class: X.Org ANSI C Emulation, version 0.4 [ 71.779] (II) glamor: OpenGL accelerated X.org driver based. [ 71.787] (II) glamor: EGL version 1.4 (DRI2): [ 71.788] (II) modeset(0): glamor initialized [ 71.814] (II) modeset(0): Output HDMI-1 has no monitor section [ 72.082] (II) modeset(0): Output DP-1 has no monitor section [ 72.098] (II) modeset(0): Output HDMI-2 has no monitor section [ 72.124] (II) modeset(0): EDID for output HDMI-1 [ 72.124] (II) modeset(0): Manufacturer: ACI Model: 27a5 Serial#: 16843009 [ 72.124] (II) modeset(0): Year: 2015 Week: 14 [ 72.124] (II) modeset(0): EDID Version: 1.3 [ 72.124] (II) modeset(0): Digital Display Input [ 72.124] (II) modeset(0): Max Image Size [cm]: horiz.: 60 vert.: 34 [ 72.124] (II) modeset(0): Gamma: 2.20 [ 72.124] (II) modeset(0): DPMS capabilities: StandBy Suspend Off [ 72.124] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 72.124] (II) modeset(0): First detailed timing is preferred mode [ 72.124] (II) modeset(0): redX: 0.661 redY: 0.332 greenX: 0.302 greenY: 0.613 [ 72.124] (II) modeset(0): blueX: 0.149 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 72.124] (II) modeset(0): Supported established timings: [ 72.124] (II) modeset(0): 720x400@70Hz [ 72.124] (II) modeset(0): 640x480@60Hz [ 72.124] (II) modeset(0): 640x480@67Hz [ 72.124] (II) modeset(0): 640x480@72Hz [ 72.124] (II) modeset(0): 640x480@75Hz [ 72.124] (II) modeset(0): 800x600@56Hz [ 72.124] (II) modeset(0): 800x600@60Hz [ 72.124] (II) modeset(0): 800x600@72Hz [ 72.124] (II) modeset(0): 800x600@75Hz [ 72.124] (II) modeset(0): 832x624@75Hz [ 72.124] (II) modeset(0): 1024x768@60Hz [ 72.124] (II) modeset(0): 1024x768@70Hz [ 72.124] (II) modeset(0): 1024x768@75Hz [ 72.124] (II) modeset(0): 1280x1024@75Hz [ 72.124] (II) modeset(0): 1152x864@75Hz [ 72.124] (II) modeset(0): Manufacturer's mask: 0 [ 72.124] (II) modeset(0): Supported standard timings: [ 72.124] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 72.124] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 72.124] (II) modeset(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 72.124] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 72.124] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 72.124] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 72.124] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 72.124] (II) modeset(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 72.124] (II) modeset(0): Supported detailed timing: [ 72.124] (II) modeset(0): clock: 241.5 MHz Image Size: 597 x 336 mm [ 72.124] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 72.124] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 72.124] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 245 MHz [ 72.124] (II) modeset(0): Monitor name: MX27AQ [ 72.124] (II) modeset(0): Serial No: F3LMRS053343 [ 72.124] (II) modeset(0): Supported detailed timing: [ 72.124] (II) modeset(0): clock: 148.5 MHz Image Size: 597 x 336 mm [ 72.124] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 72.124] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 72.124] (II) modeset(0): Supported detailed timing: [ 72.124] (II) modeset(0): clock: 241.5 MHz Image Size: 597 x 336 mm [ 72.124] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 72.124] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 72.124] (II) modeset(0): Supported detailed timing: [ 72.124] (II) modeset(0): clock: 74.2 MHz Image Size: 597 x 336 mm [ 72.124] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 72.124] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 72.124] (II) modeset(0): Supported detailed timing: [ 72.124] (II) modeset(0): clock: 25.2 MHz Image Size: 597 x 336 mm [ 72.124] (II) modeset(0): h_active: 640 h_sync: 648 h_sync_end 744 h_blank_end 800 h_border: 8 [ 72.124] (II) modeset(0): v_active: 480 v_sync: 482 v_sync_end 484 v_blanking: 525 v_border: 8 [ 72.124] (II) modeset(0): Number of EDID sections to follow: 1 [ 72.124] (II) modeset(0): EDID (in hex): [ 72.124] (II) modeset(0): 00ffffffffffff000469a52701010101 [ 72.124] (II) modeset(0): 0e190103803c2278ea4455a9554d9d26 [ 72.124] (II) modeset(0): 0f5054bfef80714f81808100b3008140 [ 72.124] (II) modeset(0): 9500a940d1c0565e00a0a0a029503020 [ 72.124] (II) modeset(0): 3500555021000012000000fd00384b1e [ 72.124] (II) modeset(0): 5318000a202020202020000000fc004d [ 72.124] (II) modeset(0): 58323741510a202020202020000000ff [ 72.124] (II) modeset(0): 0046334c4d52533035333334330a017b [ 72.124] (II) modeset(0): 02031df14a900403011412051f071323 [ 72.124] (II) modeset(0): 0907078301000065030c003000023a80 [ 72.124] (II) modeset(0): 1871382d40582c450055502100001e56 [ 72.124] (II) modeset(0): 5e00a0a0a02950302035005550210000 [ 72.124] (II) modeset(0): 1e011d007251d01e206e285500555021 [ 72.124] (II) modeset(0): 00001ed60980a020e02d100860220055 [ 72.124] (II) modeset(0): 50210808180000000000000000000000 [ 72.124] (II) modeset(0): 000000000000000000000000000000c6 [ 72.124] (II) modeset(0): Printing probed modes for output HDMI-1 [ 72.125] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [ 72.125] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync (88.8 kHz e) [ 72.125] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 72.125] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 72.125] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 72.125] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 72.125] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 72.125] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e) [ 72.125] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 72.125] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 72.125] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 72.125] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 72.125] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 72.125] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 72.125] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 72.125] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 72.125] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 72.125] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 72.125] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 72.125] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 72.125] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 72.125] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e) [ 72.125] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 72.125] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 72.125] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 72.125] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 72.125] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 72.125] (II) modeset(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 -hsync -vsync (31.5 kHz e) [ 72.125] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 72.125] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 72.393] (II) modeset(0): EDID for output DP-1 [ 72.408] (II) modeset(0): EDID for output HDMI-2 [ 72.408] (II) modeset(0): Manufacturer: PHL Model: 851 Serial#: 16843009 [ 72.408] (II) modeset(0): Year: 2008 Week: 11 [ 72.408] (II) modeset(0): EDID Version: 1.3 [ 72.408] (II) modeset(0): Digital Display Input [ 72.408] (II) modeset(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [ 72.408] (II) modeset(0): Gamma: 2.20 [ 72.408] (II) modeset(0): DPMS capabilities: Off [ 72.408] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 72.408] (II) modeset(0): Default color space is primary color space [ 72.408] (II) modeset(0): First detailed timing is preferred mode [ 72.408] (II) modeset(0): redX: 0.639 redY: 0.333 greenX: 0.289 greenY: 0.597 [ 72.408] (II) modeset(0): blueX: 0.153 blueY: 0.082 whiteX: 0.313 whiteY: 0.329 [ 72.408] (II) modeset(0): Supported established timings: [ 72.408] (II) modeset(0): 720x400@70Hz [ 72.408] (II) modeset(0): 640x480@60Hz [ 72.408] (II) modeset(0): 640x480@67Hz [ 72.408] (II) modeset(0): 640x480@72Hz [ 72.408] (II) modeset(0): 640x480@75Hz [ 72.408] (II) modeset(0): 800x600@56Hz [ 72.408] (II) modeset(0): 800x600@60Hz [ 72.408] (II) modeset(0): 800x600@72Hz [ 72.408] (II) modeset(0): 800x600@75Hz [ 72.408] (II) modeset(0): 832x624@75Hz [ 72.408] (II) modeset(0): 1024x768@60Hz [ 72.408] (II) modeset(0): 1024x768@70Hz [ 72.408] (II) modeset(0): 1024x768@75Hz [ 72.408] (II) modeset(0): 1280x1024@75Hz [ 72.408] (II) modeset(0): Manufacturer's mask: 0 [ 72.408] (II) modeset(0): Supported standard timings: [ 72.408] (II) modeset(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 72.408] (II) modeset(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 72.408] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 72.408] (II) modeset(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 72.408] (II) modeset(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 72.408] (II) modeset(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 72.408] (II) modeset(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 72.408] (II) modeset(0): #7: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 72.408] (II) modeset(0): Supported detailed timing: [ 72.408] (II) modeset(0): clock: 119.0 MHz Image Size: 434 x 270 mm [ 72.408] (II) modeset(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 [ 72.408] (II) modeset(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 [ 72.408] (II) modeset(0): Serial No: CU30811005792 [ 72.408] (II) modeset(0): Monitor name: Philips 220WS [ 72.408] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 93 kHz, PixClock max 175 MHz [ 72.408] (II) modeset(0): EDID (in hex): [ 72.408] (II) modeset(0): 00ffffffffffff00410c510801010101 [ 72.408] (II) modeset(0): 0b120103802f1e782e9345a3554a9827 [ 72.408] (II) modeset(0): 155054bfef00b300a940950f950081c0 [ 72.408] (II) modeset(0): 8140714f81807c2e90a0601a1e403020 [ 72.408] (II) modeset(0): 3600b20e1100001c000000ff00435533 [ 72.408] (II) modeset(0): 30383131303035373932000000fc0050 [ 72.408] (II) modeset(0): 68696c697073203232305753000000fd [ 72.408] (II) modeset(0): 00384c1e5d11700a20323230575300e8 [ 72.408] (II) modeset(0): Printing probed modes for output HDMI-2 [ 72.408] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz eP) [ 72.408] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 72.408] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 72.408] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 72.408] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 72.408] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 72.408] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 72.408] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 72.408] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 72.408] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 72.408] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 72.408] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 72.408] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 72.408] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 72.408] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 72.408] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 72.408] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 72.408] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 72.408] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 72.408] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 72.408] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 72.408] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 72.408] (II) modeset(0): Output HDMI-1 connected [ 72.408] (II) modeset(0): Output DP-1 disconnected [ 72.408] (II) modeset(0): Output HDMI-2 connected [ 72.408] (II) modeset(0): Using spanning desktop for initial modes [ 72.408] (II) modeset(0): Output HDMI-1 using initial mode 2560x1440 +0+0 [ 72.408] (II) modeset(0): Output HDMI-2 using initial mode 1680x1050 +2560+0 [ 72.408] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 72.408] (==) modeset(0): DPI set to (96, 96) [ 72.408] (II) Loading sub module "fb" [ 72.408] (II) LoadModule: "fb" [ 72.408] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 72.408] (II) Module fb: vendor="X.Org Foundation" [ 72.408] compiled for 1.19.1, module version = 1.0.0 [ 72.408] ABI class: X.Org ANSI C Emulation, version 0.4 [ 72.408] (II) UnloadModule: "fbdev" [ 72.409] (II) Unloading fbdev [ 72.409] (II) UnloadSubModule: "fbdevhw" [ 72.409] (II) Unloading fbdevhw [ 72.409] (II) UnloadModule: "vesa" [ 72.409] (II) Unloading vesa [ 72.409] (==) Depth 24 pixmap format is 32 bpp [ 72.536] (==) modeset(0): Backing store enabled [ 72.536] (==) modeset(0): Silken mouse enabled [ 72.536] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 72.598] (==) modeset(0): DPMS enabled [ 72.598] (II) modeset(0): [DRI2] Setup complete [ 72.598] (II) modeset(0): [DRI2] DRI driver: i965 [ 72.598] (II) modeset(0): [DRI2] VDPAU driver: i965 [ 72.598] (--) RandR disabled [ 72.600] (II) SELinux: Disabled on system [ 72.606] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 72.606] (II) AIGLX: enabled GLX_ARB_create_context [ 72.606] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 72.606] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 72.606] (II) AIGLX: enabled GLX_INTEL_swap_event [ 72.606] (II) AIGLX: enabled GLX_SGI_swap_control [ 72.606] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 72.606] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 72.606] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 72.606] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 72.606] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 72.606] (II) AIGLX: Loaded and initialized i965 [ 72.606] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 72.610] (II) modeset(0): Damage tracking initialized [ 72.610] (II) modeset(0): Setting screen physical size to 1121 x 381 [ 72.648] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 72.648] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 72.648] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 72.648] (**) Power Button: Applying InputClass "system-keyboard" [ 72.648] (II) LoadModule: "libinput" [ 72.648] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [ 72.654] (II) Module libinput: vendor="X.Org Foundation" [ 72.654] compiled for 1.19.0, module version = 0.23.0 [ 72.654] Module class: X.Org XInput Driver [ 72.654] ABI class: X.Org XInput driver, version 24.1 [ 72.654] (II) Using input driver 'libinput' for 'Power Button' [ 72.654] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0 [ 72.654] (**) Power Button: always reports core events [ 72.654] (**) Option "Device" "/dev/input/event2" [ 72.654] (**) Option "_source" "server/udev" [ 72.655] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 72.655] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 72.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 72.655] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 72.655] (**) Option "xkb_layout" "de" [ 72.655] (**) Option "xkb_variant" "nodeadkeys" [ 72.672] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 72.672] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 72.673] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 72.673] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 72.673] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 72.673] (**) Video Bus: Applying InputClass "system-keyboard" [ 72.673] (II) Using input driver 'libinput' for 'Video Bus' [ 72.673] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0 [ 72.673] (**) Video Bus: always reports core events [ 72.673] (**) Option "Device" "/dev/input/event3" [ 72.673] (**) Option "_source" "server/udev" [ 72.674] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard [ 72.674] (II) input device 'Video Bus', /dev/input/event3 is a keyboard [ 72.674] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 72.674] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 72.674] (**) Option "xkb_layout" "de" [ 72.674] (**) Option "xkb_variant" "nodeadkeys" [ 72.674] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard [ 72.674] (II) input device 'Video Bus', /dev/input/event3 is a keyboard [ 72.674] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 72.674] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 72.674] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 72.674] (**) Power Button: Applying InputClass "system-keyboard" [ 72.674] (II) Using input driver 'libinput' for 'Power Button' [ 72.675] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0 [ 72.675] (**) Power Button: always reports core events [ 72.675] (**) Option "Device" "/dev/input/event1" [ 72.675] (**) Option "_source" "server/udev" [ 72.675] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard [ 72.675] (II) input device 'Power Button', /dev/input/event1 is a keyboard [ 72.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 72.675] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 72.675] (**) Option "xkb_layout" "de" [ 72.675] (**) Option "xkb_variant" "nodeadkeys" [ 72.675] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard [ 72.675] (II) input device 'Power Button', /dev/input/event1 is a keyboard [ 72.676] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 72.676] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 72.676] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 72.676] (**) Sleep Button: Applying InputClass "system-keyboard" [ 72.676] (II) Using input driver 'libinput' for 'Sleep Button' [ 72.676] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 26 paused 0 [ 72.676] (**) Sleep Button: always reports core events [ 72.676] (**) Option "Device" "/dev/input/event0" [ 72.676] (**) Option "_source" "server/udev" [ 72.676] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard [ 72.676] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard [ 72.676] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 72.676] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 72.676] (**) Option "xkb_layout" "de" [ 72.676] (**) Option "xkb_variant" "nodeadkeys" [ 72.677] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard [ 72.677] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard [ 72.677] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4) [ 72.677] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 72.678] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 72.678] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [ 72.730] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0 [ 72.730] (**) Logitech USB Optical Mouse: always reports core events [ 72.730] (**) Option "Device" "/dev/input/event4" [ 72.730] (**) Option "_source" "server/udev" [ 72.732] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is tagged by udev as: Mouse [ 72.732] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is a pointer caps [ 72.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:046D:C05B.0001/input/input4/event4" [ 72.732] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10) [ 72.732] (**) Option "AccelerationScheme" "none" [ 72.732] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [ 72.733] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 72.733] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 72.734] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is tagged by udev as: Mouse [ 72.734] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is a pointer caps [ 72.736] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 72.736] (II) No input driver specified, ignoring this device. [ 72.736] (II) This device may have been added with another device file. [ 72.738] (II) config/udev: Adding input device Logitech Elite Keyboard (/dev/input/event11) [ 72.738] (**) Logitech Elite Keyboard: Applying InputClass "evdev pointer catchall" [ 72.738] (**) Logitech Elite Keyboard: Applying InputClass "evdev keyboard catchall" [ 72.738] (**) Logitech Elite Keyboard: Applying InputClass "libinput pointer catchall" [ 72.738] (**) Logitech Elite Keyboard: Applying InputClass "libinput keyboard catchall" [ 72.738] (**) Logitech Elite Keyboard: Applying InputClass "system-keyboard" [ 72.738] (II) Using input driver 'libinput' for 'Logitech Elite Keyboard' [ 72.740] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 28 paused 0 [ 72.740] (**) Logitech Elite Keyboard: always reports core events [ 72.740] (**) Option "Device" "/dev/input/event11" [ 72.740] (**) Option "_source" "server/udev" [ 72.742] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is tagged by udev as: Keyboard Mouse [ 72.742] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a pointer caps [ 72.742] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a keyboard [ 72.742] (II) libinput: Logitech Elite Keyboard: needs a virtual subdevice [ 72.742] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:046D:B301.0002/input/input11/event11" [ 72.742] (II) XINPUT: Adding extended input device "Logitech Elite Keyboard" (type: MOUSE, id 11) [ 72.742] (**) Option "AccelerationScheme" "none" [ 72.742] (**) Logitech Elite Keyboard: (accel) selected scheme none/0 [ 72.742] (**) Logitech Elite Keyboard: (accel) acceleration factor: 2.000 [ 72.742] (**) Logitech Elite Keyboard: (accel) acceleration threshold: 4 [ 72.744] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is tagged by udev as: Keyboard Mouse [ 72.744] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a pointer caps [ 72.744] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a keyboard [ 72.746] (II) config/udev: Adding input device Logitech Elite Keyboard (/dev/input/mouse1) [ 72.746] (**) Logitech Elite Keyboard: Applying InputClass "system-keyboard" [ 72.746] (II) No input driver specified, ignoring this device. [ 72.746] (II) This device may have been added with another device file. [ 72.747] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10) [ 72.747] (II) No input driver specified, ignoring this device. [ 72.747] (II) This device may have been added with another device file. [ 72.748] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6) [ 72.748] (II) No input driver specified, ignoring this device. [ 72.748] (II) This device may have been added with another device file. [ 72.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7) [ 72.749] (II) No input driver specified, ignoring this device. [ 72.749] (II) This device may have been added with another device file. [ 72.750] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8) [ 72.750] (II) No input driver specified, ignoring this device. [ 72.750] (II) This device may have been added with another device file. [ 72.751] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9) [ 72.751] (II) No input driver specified, ignoring this device. [ 72.751] (II) This device may have been added with another device file. [ 72.756] (II) config/udev: Adding input device ITE8713 CIR transceiver (/dev/input/event5) [ 72.756] (**) ITE8713 CIR transceiver: Applying InputClass "evdev keyboard catchall" [ 72.756] (**) ITE8713 CIR transceiver: Applying InputClass "libinput keyboard catchall" [ 72.756] (**) ITE8713 CIR transceiver: Applying InputClass "system-keyboard" [ 72.756] (II) Using input driver 'libinput' for 'ITE8713 CIR transceiver' [ 72.758] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 29 paused 0 [ 72.758] (**) ITE8713 CIR transceiver: always reports core events [ 72.758] (**) Option "Device" "/dev/input/event5" [ 72.758] (**) Option "_source" "server/udev" [ 72.759] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is tagged by udev as: Keyboard [ 72.759] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is a keyboard [ 72.759] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input5/event5" [ 72.759] (II) XINPUT: Adding extended input device "ITE8713 CIR transceiver" (type: KEYBOARD, id 12) [ 72.759] (**) Option "xkb_layout" "de" [ 72.759] (**) Option "xkb_variant" "nodeadkeys" [ 72.760] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is tagged by udev as: Keyboard [ 72.760] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is a keyboard [ 72.781] (**) Logitech Elite Keyboard: Applying InputClass "evdev pointer catchall" [ 72.781] (**) Logitech Elite Keyboard: Applying InputClass "evdev keyboard catchall" [ 72.781] (**) Logitech Elite Keyboard: Applying InputClass "libinput pointer catchall" [ 72.782] (**) Logitech Elite Keyboard: Applying InputClass "libinput keyboard catchall" [ 72.782] (**) Logitech Elite Keyboard: Applying InputClass "system-keyboard" [ 72.782] (II) Using input driver 'libinput' for 'Logitech Elite Keyboard' [ 72.782] (II) systemd-logind: returning pre-existing fd for /dev/input/event11 13:75 [ 72.782] (**) Logitech Elite Keyboard: always reports core events [ 72.782] (**) Option "Device" "/dev/input/event11" [ 72.782] (**) Option "_source" "_driver/libinput" [ 72.782] (II) libinput: Logitech Elite Keyboard: is a virtual subdevice [ 72.782] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:046D:B301.0002/input/input11/event11" [ 72.782] (II) XINPUT: Adding extended input device "Logitech Elite Keyboard" (type: KEYBOARD, id 13) [ 72.782] (**) Option "xkb_layout" "de" [ 72.782] (**) Option "xkb_variant" "nodeadkeys" [ 83.112] (II) modeset(0): EDID vendor "PHL", prod id 2129 [ 83.112] (II) modeset(0): Using EDID range info for horizontal sync [ 83.112] (II) modeset(0): Using EDID range info for vertical refresh [ 83.112] (II) modeset(0): Printing DDC gathered Modelines: [ 83.112] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz eP) [ 83.112] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 83.112] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 83.112] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 83.112] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 83.112] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 83.112] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 83.112] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 83.112] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 83.112] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 83.112] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 83.112] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 83.112] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 83.112] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 83.112] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 83.112] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 83.112] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 83.112] (II) modeset(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 83.112] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 83.112] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 83.112] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 83.112] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 83.112] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 83.422] (II) modeset(0): EDID vendor "PHL", prod id 2129 [ 83.422] (II) modeset(0): Using hsync ranges from config file [ 83.422] (II) modeset(0): Using vrefresh ranges from config file [ 83.422] (II) modeset(0): Printing DDC gathered Modelines: [ 83.422] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz eP) [ 83.422] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 83.422] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 83.422] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 83.422] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 83.422] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 83.422] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 83.422] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 83.422] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 83.422] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 83.422] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 83.422] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 83.422] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 83.422] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 83.422] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 83.422] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 83.422] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 83.422] (II) modeset(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 83.422] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 83.422] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [ 83.422] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 83.422] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 83.422] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 83.423] (**) Option "fd" "21" [ 83.423] (**) Option "fd" "24" [ 83.423] (**) Option "fd" "25" [ 83.423] (**) Option "fd" "26" [ 83.423] (**) Option "fd" "27" [ 83.423] (**) Option "fd" "28" [ 83.423] (**) Option "fd" "29" [ 83.423] (**) Option "fd" "28" [ 83.423] (II) AIGLX: Suspending AIGLX clients for VT switch [ 83.487] (II) systemd-logind: got pause for 13:65 [ 83.487] (II) systemd-logind: got pause for 13:66 [ 83.487] (II) systemd-logind: got pause for 226:0 [ 83.487] (II) systemd-logind: got pause for 13:67 [ 83.487] (II) systemd-logind: got pause for 13:75 [ 83.487] (II) systemd-logind: got pause for 13:64 [ 83.487] (II) systemd-logind: got pause for 13:68 [ 83.487] (II) systemd-logind: got pause for 13:69
(In reply to Mathias Dietz from comment #2) > I rebuild the fedora source rpm with the patch, but the problem still > happens. In fact when using the "intel" driver it does not even detect the > device (with our without patch) Use upstream and not fedora, since they neutered the driver.
(In reply to Chris Wilson from comment #3) > (In reply to Mathias Dietz from comment #2) > > I rebuild the fedora source rpm with the patch, but the problem still > > happens. In fact when using the "intel" driver it does not even detect the > > device (with our without patch) > > Use upstream and not fedora, since they neutered the driver. ok, I just did a buikd from upstream. With the the intel driver detects the card correctly, but the GPU hangs are back as well. I can not login still. dmesg: [ 18.636926] [drm] GPU HANG: ecode 9:0:0x85df7efb, in systemd-logind [817], reason: Hang on render ring, action: reset [ 18.636927] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 18.636927] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 18.636928] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 18.636928] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 18.636929] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 18.638268] drm/i915: Resetting chip after gpu hang [ 18.638302] [drm] RC6 on [ 18.652452] [drm] GuC firmware load skipped xorg.log [ 67.150] (--) Log file renamed from "/var/lib/gdm/.local/share/xorg/Xorg.pid-4571.log" to "/var/lib/gdm/.local/share/xorg/Xorg.0.log" [ 67.150] X.Org X Server 1.19.1 Release Date: 2017-01-11 [ 67.150] X Protocol Version 11, Revision 0 [ 67.150] Build Operating System: 4.9.3-200.fc25.x86_64 [ 67.150] Current Operating System: Linux nslu 4.9.4-201.fc25.x86_64 #1 SMP Tue Jan 17 18:58:54 UTC 2017 x86_64 [ 67.150] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.4-201.fc25.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=de_DE.UTF-8 i915.enable_rc61=0 [ 67.150] Build Date: 16 January 2017 04:11:55PM [ 67.150] Build ID: xorg-x11-server 1.19.1-2.fc25 [ 67.150] Current version of pixman: 0.34.0 [ 67.150] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 67.150] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 67.150] (==) Log file: "/var/lib/gdm/.local/share/xorg/Xorg.0.log", Time: Tue Jan 24 22:46:10 2017 [ 67.150] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 67.150] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 67.151] (==) No Layout section. Using the first Screen section. [ 67.151] (==) No screen section available. Using defaults. [ 67.151] (**) |-->Screen "Default Screen Section" (0) [ 67.151] (**) | |-->Monitor "<default monitor>" [ 67.151] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 67.151] (**) | |-->Device "Intel Graphics" [ 67.151] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 67.151] (==) Automatically adding devices [ 67.151] (==) Automatically enabling devices [ 67.151] (==) Automatically adding GPU devices [ 67.151] (==) Automatically binding GPU devices [ 67.151] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 67.151] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 67.151] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 67.151] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 67.151] (II) Loader magic: 0x825e00 [ 67.151] (II) Module ABI versions: [ 67.151] X.Org ANSI C Emulation: 0.4 [ 67.151] X.Org Video Driver: 23.0 [ 67.151] X.Org XInput driver : 24.1 [ 67.151] X.Org Server Extension : 10.0 [ 67.151] (++) using VT number 1 [ 67.153] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2 [ 67.153] (II) xfree86: Adding drm device (/dev/dri/card0) [ 67.153] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0 [ 67.155] (--) PCI:*(0:0:2:0) 8086:1926:8086:2063 rev 10, Mem @ 0xde000000/16777216, 0xd0000000/134217728, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 67.155] (II) LoadModule: "glx" [ 67.155] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 67.156] (II) Module glx: vendor="X.Org Foundation" [ 67.156] compiled for 1.19.1, module version = 1.0.0 [ 67.156] ABI class: X.Org Server Extension, version 10.0 [ 67.156] (II) LoadModule: "intel" [ 67.157] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 67.157] (II) Module intel: vendor="X.Org Foundation" [ 67.157] compiled for 1.19.1, module version = 2.99.917 [ 67.157] Module class: X.Org Video Driver [ 67.157] ABI class: X.Org Video Driver, version 23.0 [ 67.157] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 67.157] (II) intel: Driver for Intel(R) HD Graphics [ 67.157] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 67.157] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 67.157] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) [ 67.157] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919 [ 67.157] (II) intel(0): SNA compiled from 2.99.917-747-g028c946 [ 67.157] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 67.157] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris Graphics 540 [ 67.157] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads [ 67.157] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 67.157] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 67.157] (==) intel(0): RGB weight 888 [ 67.157] (==) intel(0): Default visual is TrueColor [ 67.157] (**) intel(0): Option "AccelMethod" "sna" [ 67.158] (II) intel(0): Output HDMI1 has no monitor section [ 67.158] (II) intel(0): Enabled output HDMI1 [ 67.158] (II) intel(0): Output DP1 has no monitor section [ 67.158] (II) intel(0): Enabled output DP1 [ 67.158] (II) intel(0): Output HDMI2 has no monitor section [ 67.158] (II) intel(0): Enabled output HDMI2 [ 67.158] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 67.158] (II) intel(0): Output VIRTUAL1 has no monitor section [ 67.158] (II) intel(0): Enabled output VIRTUAL1 [ 67.158] (--) intel(0): Output HDMI1 using initial mode 2560x1440 on pipe 0 [ 67.158] (--) intel(0): Output HDMI2 using initial mode 1680x1050 on pipe 1 [ 67.158] (==) intel(0): TearFree disabled [ 67.158] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 67.158] (==) intel(0): DPI set to (96, 96) [ 67.158] (II) Loading sub module "dri3" [ 67.158] (II) LoadModule: "dri3" [ 67.158] (II) Module "dri3" already built-in [ 67.158] (II) Loading sub module "dri2" [ 67.158] (II) LoadModule: "dri2" [ 67.158] (II) Module "dri2" already built-in [ 67.158] (II) Loading sub module "present" [ 67.158] (II) LoadModule: "present" [ 67.158] (II) Module "present" already built-in [ 67.158] (==) Depth 24 pixmap format is 32 bpp [ 67.159] (II) intel(0): SNA initialized with Skylake (gen9) backend [ 67.159] (==) intel(0): Backing store enabled [ 67.159] (==) intel(0): Silken mouse enabled [ 67.159] (II) intel(0): HW Cursor enabled [ 67.159] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 67.159] (==) intel(0): DPMS enabled [ 67.159] (==) intel(0): Display hotplug detection enabled [ 67.159] (II) intel(0): [DRI2] Setup complete [ 67.159] (II) intel(0): [DRI2] DRI driver: i965 [ 67.159] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 67.159] (II) intel(0): direct rendering: DRI2 enabled [ 67.159] (II) intel(0): hardware support for Present enabled [ 67.159] (--) RandR disabled [ 67.161] (II) SELinux: Disabled on system [ 67.166] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 67.166] (II) AIGLX: enabled GLX_ARB_create_context [ 67.166] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 67.166] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 67.166] (II) AIGLX: enabled GLX_INTEL_swap_event [ 67.166] (II) AIGLX: enabled GLX_SGI_swap_control [ 67.166] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 67.166] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 67.166] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 67.166] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 67.166] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 67.166] (II) AIGLX: Loaded and initialized i965 [ 67.166] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 67.170] (II) intel(0): switch to mode 2560x1440@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 67.173] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI2 using pipe 1, position (0, 0), rotation normal, reflection none [ 67.180] (II) intel(0): Setting screen physical size to 677 x 381 [ 67.201] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 67.201] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 67.201] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 67.201] (**) Power Button: Applying InputClass "system-keyboard" [ 67.201] (II) LoadModule: "libinput" [ 67.201] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [ 67.204] (II) Module libinput: vendor="X.Org Foundation" [ 67.204] compiled for 1.19.0, module version = 0.23.0 [ 67.204] Module class: X.Org XInput Driver [ 67.204] ABI class: X.Org XInput driver, version 24.1 [ 67.204] (II) Using input driver 'libinput' for 'Power Button' [ 67.204] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0 [ 67.204] (**) Power Button: always reports core events [ 67.204] (**) Option "Device" "/dev/input/event2" [ 67.204] (**) Option "_source" "server/udev" [ 67.205] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 67.205] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 67.205] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 67.205] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 67.205] (**) Option "xkb_layout" "de" [ 67.205] (**) Option "xkb_variant" "nodeadkeys" [ 67.218] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 67.218] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 67.218] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 67.218] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 67.218] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 67.218] (**) Video Bus: Applying InputClass "system-keyboard" [ 67.218] (II) Using input driver 'libinput' for 'Video Bus' [ 67.219] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0 [ 67.219] (**) Video Bus: always reports core events [ 67.219] (**) Option "Device" "/dev/input/event3" [ 67.219] (**) Option "_source" "server/udev" [ 67.219] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard [ 67.219] (II) input device 'Video Bus', /dev/input/event3 is a keyboard [ 67.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 67.219] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 67.219] (**) Option "xkb_layout" "de" [ 67.219] (**) Option "xkb_variant" "nodeadkeys" [ 67.219] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard [ 67.219] (II) input device 'Video Bus', /dev/input/event3 is a keyboard [ 67.220] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 67.220] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 67.220] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 67.220] (**) Power Button: Applying InputClass "system-keyboard" [ 67.220] (II) Using input driver 'libinput' for 'Power Button' [ 67.220] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0 [ 67.220] (**) Power Button: always reports core events [ 67.220] (**) Option "Device" "/dev/input/event1" [ 67.220] (**) Option "_source" "server/udev" [ 67.220] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard [ 67.220] (II) input device 'Power Button', /dev/input/event1 is a keyboard [ 67.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 67.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 67.220] (**) Option "xkb_layout" "de" [ 67.220] (**) Option "xkb_variant" "nodeadkeys" [ 67.220] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard [ 67.220] (II) input device 'Power Button', /dev/input/event1 is a keyboard [ 67.221] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 67.221] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 67.221] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 67.221] (**) Sleep Button: Applying InputClass "system-keyboard" [ 67.221] (II) Using input driver 'libinput' for 'Sleep Button' [ 67.221] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 26 paused 0 [ 67.221] (**) Sleep Button: always reports core events [ 67.221] (**) Option "Device" "/dev/input/event0" [ 67.221] (**) Option "_source" "server/udev" [ 67.221] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard [ 67.221] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard [ 67.221] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 67.221] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 67.221] (**) Option "xkb_layout" "de" [ 67.221] (**) Option "xkb_variant" "nodeadkeys" [ 67.221] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard [ 67.221] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard [ 67.222] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4) [ 67.222] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 67.222] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 67.222] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [ 67.274] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0 [ 67.274] (**) Logitech USB Optical Mouse: always reports core events [ 67.275] (**) Option "Device" "/dev/input/event4" [ 67.275] (**) Option "_source" "server/udev" [ 67.277] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is tagged by udev as: Mouse [ 67.277] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is a pointer caps [ 67.277] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:046D:C05B.0001/input/input4/event4" [ 67.277] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10) [ 67.278] (**) Option "AccelerationScheme" "none" [ 67.278] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [ 67.278] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 67.278] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 67.280] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is tagged by udev as: Mouse [ 67.280] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is a pointer caps [ 67.283] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 67.283] (II) No input driver specified, ignoring this device. [ 67.283] (II) This device may have been added with another device file. [ 67.285] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10) [ 67.285] (II) No input driver specified, ignoring this device. [ 67.285] (II) This device may have been added with another device file. [ 67.286] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6) [ 67.286] (II) No input driver specified, ignoring this device. [ 67.286] (II) This device may have been added with another device file. [ 67.287] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7) [ 67.287] (II) No input driver specified, ignoring this device. [ 67.287] (II) This device may have been added with another device file. [ 67.288] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8) [ 67.288] (II) No input driver specified, ignoring this device. [ 67.288] (II) This device may have been added with another device file. [ 67.289] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9) [ 67.289] (II) No input driver specified, ignoring this device. [ 67.289] (II) This device may have been added with another device file. [ 67.295] (II) config/udev: Adding input device ITE8713 CIR transceiver (/dev/input/event5) [ 67.295] (**) ITE8713 CIR transceiver: Applying InputClass "evdev keyboard catchall" [ 67.295] (**) ITE8713 CIR transceiver: Applying InputClass "libinput keyboard catchall" [ 67.295] (**) ITE8713 CIR transceiver: Applying InputClass "system-keyboard" [ 67.295] (II) Using input driver 'libinput' for 'ITE8713 CIR transceiver' [ 67.297] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 28 paused 0 [ 67.297] (**) ITE8713 CIR transceiver: always reports core events [ 67.297] (**) Option "Device" "/dev/input/event5" [ 67.297] (**) Option "_source" "server/udev" [ 67.298] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is tagged by udev as: Keyboard [ 67.298] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is a keyboard [ 67.298] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input5/event5" [ 67.298] (II) XINPUT: Adding extended input device "ITE8713 CIR transceiver" (type: KEYBOARD, id 11) [ 67.298] (**) Option "xkb_layout" "de" [ 67.298] (**) Option "xkb_variant" "nodeadkeys" [ 67.300] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is tagged by udev as: Keyboard [ 67.300] (II) input device 'ITE8713 CIR transceiver', /dev/input/event5 is a keyboard [ 67.838] (II) intel(0): resizing framebuffer to 4240x1440 [ 78.786] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI2 using pipe 1, position (2560, 0), rotation normal, reflection none [ 112.317] (II) config/udev: Adding input device Logitech Elite Keyboard (/dev/input/mouse1) [ 112.317] (**) Logitech Elite Keyboard: Applying InputClass "system-keyboard" [ 112.317] (II) No input driver specified, ignoring this device. [ 112.317] (II) This device may have been added with another device file. [ 112.363] (II) config/udev: Adding input device Logitech Elite Keyboard (/dev/input/event11) [ 112.363] (**) Logitech Elite Keyboard: Applying InputClass "evdev pointer catchall" [ 112.363] (**) Logitech Elite Keyboard: Applying InputClass "evdev keyboard catchall" [ 112.363] (**) Logitech Elite Keyboard: Applying InputClass "libinput pointer catchall" [ 112.363] (**) Logitech Elite Keyboard: Applying InputClass "libinput keyboard catchall" [ 112.363] (**) Logitech Elite Keyboard: Applying InputClass "system-keyboard" [ 112.363] (II) Using input driver 'libinput' for 'Logitech Elite Keyboard' [ 112.366] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 31 paused 0 [ 112.366] (**) Logitech Elite Keyboard: always reports core events [ 112.366] (**) Option "Device" "/dev/input/event11" [ 112.366] (**) Option "_source" "server/udev" [ 112.367] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is tagged by udev as: Keyboard Mouse [ 112.367] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a pointer caps [ 112.367] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a keyboard [ 112.368] (II) libinput: Logitech Elite Keyboard: needs a virtual subdevice [ 112.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:046D:B301.0002/input/input11/event11" [ 112.368] (II) XINPUT: Adding extended input device "Logitech Elite Keyboard" (type: MOUSE, id 12) [ 112.368] (**) Option "AccelerationScheme" "none" [ 112.369] (**) Logitech Elite Keyboard: (accel) selected scheme none/0 [ 112.369] (**) Logitech Elite Keyboard: (accel) acceleration factor: 2.000 [ 112.369] (**) Logitech Elite Keyboard: (accel) acceleration threshold: 4 [ 112.370] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is tagged by udev as: Keyboard Mouse [ 112.370] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a pointer caps [ 112.370] (II) input device 'Logitech Elite Keyboard', /dev/input/event11 is a keyboard [ 112.371] (**) Logitech Elite Keyboard: Applying InputClass "evdev pointer catchall" [ 112.371] (**) Logitech Elite Keyboard: Applying InputClass "evdev keyboard catchall" [ 112.371] (**) Logitech Elite Keyboard: Applying InputClass "libinput pointer catchall" [ 112.371] (**) Logitech Elite Keyboard: Applying InputClass "libinput keyboard catchall" [ 112.371] (**) Logitech Elite Keyboard: Applying InputClass "system-keyboard" [ 112.371] (II) Using input driver 'libinput' for 'Logitech Elite Keyboard' [ 112.371] (II) systemd-logind: returning pre-existing fd for /dev/input/event11 13:75 [ 112.371] (**) Logitech Elite Keyboard: always reports core events [ 112.371] (**) Option "Device" "/dev/input/event11" [ 112.371] (**) Option "_source" "_driver/libinput" [ 112.371] (II) libinput: Logitech Elite Keyboard: is a virtual subdevice [ 112.371] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:046D:B301.0002/input/input11/event11" [ 112.371] (II) XINPUT: Adding extended input device "Logitech Elite Keyboard" (type: KEYBOARD, id 13) [ 112.371] (**) Option "xkb_layout" "de" [ 112.371] (**) Option "xkb_variant" "nodeadkeys" [ 134.903] (**) Option "fd" "21" [ 134.904] (**) Option "fd" "24" [ 134.904] (**) Option "fd" "25" [ 134.904] (**) Option "fd" "26" [ 134.904] (**) Option "fd" "27" [ 134.904] (**) Option "fd" "28" [ 134.904] (**) Option "fd" "31" [ 134.904] (**) Option "fd" "31" [ 134.905] (II) UnloadModule: "libinput" [ 134.905] (II) systemd-logind: not releasing fd for 13:75, still in use [ 134.905] (II) UnloadModule: "libinput" [ 134.905] (II) systemd-logind: releasing fd for 13:75 [ 134.938] (II) UnloadModule: "libinput" [ 134.938] (II) systemd-logind: releasing fd for 13:69 [ 134.965] (II) UnloadModule: "libinput" [ 134.965] (II) systemd-logind: releasing fd for 13:68 [ 135.001] (II) UnloadModule: "libinput" [ 135.001] (II) systemd-logind: releasing fd for 13:64 [ 135.017] (II) UnloadModule: "libinput" [ 135.017] (II) systemd-logind: releasing fd for 13:65 [ 135.033] (II) UnloadModule: "libinput" [ 135.033] (II) systemd-logind: releasing fd for 13:67 [ 135.049] (II) UnloadModule: "libinput" [ 135.049] (II) systemd-logind: releasing fd for 13:66 [ 135.130] (II) Server terminated successfully (0). Closing log file.
(In reply to Mathias Dietz from comment #4) > (In reply to Chris Wilson from comment #3) > > (In reply to Mathias Dietz from comment #2) > > > I rebuild the fedora source rpm with the patch, but the problem still > > > happens. In fact when using the "intel" driver it does not even detect the > > > device (with our without patch) > > > > Use upstream and not fedora, since they neutered the driver. > > ok, I just did a buikd from upstream. With the the intel driver detects the > card correctly, but the GPU hangs are back as well. I can not login still. > Hello Mathias, Is this still occurring with latest kernel. Could you please provide full dmesg with drm.debug=0xe parameter on grub and new error state with your latest configuration? Thank you.
Hi Elizabeth, thanks for getting back to me. Meanwhile I got a hardware replacement and I verified today that the problem is gone. Looks like the Hardware was broken. I'll close the bug. Thanks
(In reply to Mathias Dietz from comment #6) > Hi Elizabeth, thanks for getting back to me. > Meanwhile I got a hardware replacement and I verified today that the problem > is gone. Looks like the Hardware was broken. > I'll close the bug. > > Thanks Thank you for the information. Closing the bug.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.