Attachment 17516 Details for Bug 16612 – dmesg

dmesg

out (text/plain), 120.66 KB, created by liuhaien on 2008-07-03 22:39:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: liuhaien

Created: 2008-07-03 22:39:41 UTC

Size: 120.66 KB

patch

obsolete

>(power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3E6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 3E6E1DB4, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (50 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (47 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17
>0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
>cs: IO port probe 0x7000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel text: 2028k
>Write protecting the kernel read-only data: 904k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 1-4: configuration #1 chosen from 1 choice
>hub 1-4:1.0: USB hub found
>hub 1-4:1.0: 7 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 1-4.7: new low speed USB device using ehci_hcd and address 4
>usb 1-4.7: configuration #1 chosen from 1 choice
>input: HID 413c:3010 as /class/input/input3
>input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1a.7-4.7
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 218
>ata2: DUMMY
>ata3: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ATA-7: ST9120822AS, 3.CLF, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.CL PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input4
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Clocksource tsc unstable (delta = -248732109 ns)
>thinkpad_acpi: ThinkPad ACPI Extras v0.20
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7LETA9WW (2.09 ), EC 7KHT24WW-1.08
>thinkpad_acpi: Lenovo ThinkPad T61, model 646557U
>thinkpad_acpi: radio switch found; radios are disabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /class/input/input5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: AC Adapter [AC] (on-line)
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>ACPI: Error installing bay notify handler
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input7
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SLPB]
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input9
>ACPI: device:03 is registered as cooling_device2
>input: Video Bus as /class/input/input10
>iTCO_vendor_support: vendor-support=0
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: device:08 is registered as cooling_device3
>input: Video Bus as /class/input/input11
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:36:06:77
>eth0: Intel(R) PRO/1000 Network Connection
>eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
>PCI: Setting latency timer of device 0000:15:00.2 to 64
>Registered led device: mmc0
>mmc0: SDHCI at 0xf8301800 irq 18 DMA
>ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:15:00.1 to 64
>firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
>firewire_core: created device fw0: GUID 00061b032a10026e, S400
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26k
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>Adding 1020088k swap on /dev/sda5.  Priority:-1 extents:1 across:1020088k
>Adding 498004k swap on /dev/sda2.  Priority:-2 extents:1 across:498004k
>firmware: requesting intel-ucode/06-0f-0d
>firmware: requesting intel-ucode/06-0f-0d
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>firmware: requesting iwlwifi-3945-1.ucode
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>eth0: no IPv6 routers present
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>virbr0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.13.0 20080312 on minor 0
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>Breaking affinity for irq 9
>Breaking affinity for irq 17
>Breaking affinity for irq 217
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.04 BogoMIPS (lpj=1795524)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 180006, writing 100006)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020)
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20004040, writing 4040)
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20005050, writing 5050)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20006060, writing 6060)
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 2
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.08 BogoMIPS (lpj=1795540)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 3
>usb 3-2: new full speed USB device using uhci_hcd and address 4
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.04 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.05 BogoMIPS (lpj=1795525)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 4
>usb 3-2: new full speed USB device using uhci_hcd and address 5
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.04 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.25 BogoMIPS (lpj=1795625)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 5
>usb 3-2: new full speed USB device using uhci_hcd and address 6
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.03 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.05 BogoMIPS (lpj=1795525)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 6
>usb 3-2: new full speed USB device using uhci_hcd and address 7
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.03 BogoMIPS (lpj=1795517)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 7
>usb 3-2: new full speed USB device using uhci_hcd and address 8
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.04 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.05 BogoMIPS (lpj=1795525)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 8
>usb 3-2: new full speed USB device using uhci_hcd and address 9
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.02 BogoMIPS (lpj=1795514)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 9
>usb 3-2: new full speed USB device using uhci_hcd and address 10
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.04 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>ACPI: PCI interrupt for device 0000:00:02.0 disabled
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:15:00.2 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ata5: port disabled. ignoring.
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>ACPI: PCI interrupt for device 0000:00:19.0 disabled
>ACPI handle has no context!
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0778000 soft=c0758000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3591.04 BogoMIPS (lpj=1795522)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003)
>PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
>PM: Writing back config space on device 0000:00:03.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:03.2 at offset f (was 300, writing 30b)
>PM: Writing back config space on device 0000:00:03.3 at offset f (was 200, writing 20b)
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100107, writing 100507)
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: port disabled. ignoring.
>PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata4.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata4.00: configured for UDMA/33
>PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000)
>PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006)
>PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing f8301800)
>PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>serial 00:0a: activated
>parport_pc 00:0b: activated
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
>eth0: 10/100 speed: disabling TSO
>sd 0:0:0:0: [sda] Starting disk
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-2: USB disconnect, address 10
>usb 3-2: new full speed USB device using uhci_hcd and address 11
>usb 3-2: configuration #1 chosen from 1 choice
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1
>[drm:i915_vblank_swap] *ERROR* Invalid pipe 1

Actions: View

Attachments on bug 16612: 17516 | 17517 | 17518 | 17521

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.