Attachment 20884 Details for Bug 18940 – dmesg

dmesg

dmesg (text/plain), 35.51 KB, created by liuhaien on 2008-12-07 22:27:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: liuhaien

Created: 2008-12-07 22:27:15 UTC

Size: 35.51 KB

patch

obsolete

>BIOS EBDA/lowmem at: 0009f000/0009f000
>Linux version 2.6.28-rc6 (root@x-915gm) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Dec 2 12:38:29 CST 2008
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000004f6e0000 (usable)
> BIOS-e820: 000000004f6e0000 - 000000004f6f5000 (ACPI data)
> BIOS-e820: 000000004f6f5000 - 000000004f700000 (ACPI NVS)
> BIOS-e820: 000000004f700000 - 0000000050000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x4f6e0 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 37d30000 - 37fef160
>Allocated new RAMDISK: 00100000 - 003bf160
>Move RAMDISK from 0000000037d30000 - 0000000037fef15f to 00100000 - 003bf15f
>ACPI: RSDP 000F6BA0, 0024 (r2 IBM   )
>ACPI: XSDT 4F6E739B, 005C (r1 IBM    TP-70        1240  LTP        0)
>ACPI: FACP 4F6E7400, 00F4 (r3 IBM    TP-70        1240 IBM         1)
>ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926]
>ACPI: DSDT 4F6E75E7, D75F (r1 IBM    TP-70        1240 MSFT  100000E)
>ACPI: FACS 4F6F6000, 0040
>ACPI: SSDT 4F6E75B4, 0033 (r1 IBM    TP-70        1240 MSFT  100000E)
>ACPI: ECDT 4F6F4D46, 0052 (r1 IBM    TP-70        1240 IBM         1)
>ACPI: TCPA 4F6F4D98, 0032 (r1 IBM    TP-70        1240 PTL         1)
>ACPI: APIC 4F6F4DCA, 005A (r1 IBM    TP-70        1240 IBM         1)
>ACPI: MCFG 4F6F4E24, 003E (r1 IBM    TP-70        1240 IBM         1)
>ACPI: BOOT 4F6F4FD8, 0028 (r1 IBM    TP-70        1240  LTP        1)
>ACPI: Local APIC address 0xfee00000
>386MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 00000000 - 373fe000
>  bootmap 00009000 - 0000fe80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 00008e38c0]    TEXT DATA BSS ==> [0000400000 - 00008e38c0]
>  #4 [00008e4000 - 00008e8000]    INIT_PG_TABLE ==> [00008e4000 - 00008e8000]
>  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
>  #7 [0000100000 - 00003bf160]      NEW RAMDISK ==> [0000100000 - 00003bf160]
>  #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0004f6e0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0004f6e0
>On node 0 totalpages: 325247
>free_area_init_node: node 0, pgdat c0793c00, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 774 pages used for memmap
>  HighMem zone: 98268 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 60000000 (gap: 50000000:90000000)
>PERCPU: Allocating 40960 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 322705
>Kernel command line: ro root=LABEL=/1 rhgb reboot=b    
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0845000 soft=c0825000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1729.344 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1281120k/1301376k available (2275k kernel code, 18972k reserved, 1624k data, 308k init, 396168k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc58000 - 0xfffff000   (3740 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc07d5000 - 0xc0822000   ( 308 kB)
>      .data : 0xc0638cd0 - 0xc07cee1c   (1624 kB)
>      .text : 0xc0400000 - 0xc0638cd0   (2275 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.68 BogoMIPS (lpj=1729344)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 19k freed
>ACPI: Core revision 20080926
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
>Brought up 1 CPUs
>Total of 1 processors activated (3458.68 BogoMIPS).
>CPU0 attaching NULL sched-domain.
>net_namespace: 776 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0x90080000-0x900fffff]
>pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xb0000000-0xbfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0x90000000-0x9003ffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0x90040000-0x900403ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1e.2: reg 18 32bit mmio: [0x90040800-0x900409ff]
>pci 0000:00:1e.2: reg 1c 32bit mmio: [0x90040400-0x900404ff]
>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.2: PME# disabled
>pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.3: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: bridge 32bit mmio: [0x90100000-0x901fffff]
>pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0x90200000-0x902fffff]
>pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc0000000-0xc00fffff]
>pci 0000:04:00.0: reg 10 32bit mmio: [0x90304000-0x90304fff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:04:00.1: reg 10 32bit mmio: [0x90305000-0x903057ff]
>pci 0000:04:00.1: reg 14 32bit mmio: [0x90300000-0x90303fff]
>pci 0000:04:00.1: supports D1 D2
>pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:04:00.1: PME# disabled
>pci 0000:04:02.0: reg 10 32bit mmio: [0x90306000-0x90306fff]
>pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:04:02.0: PME# disabled
>pci 0000:04:03.0: supports D1 D2
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0x90300000-0xa00fffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
>pci 0000:0b:01.0: reg 10 io port: [0x8020-0x8027]
>pci 0000:0b:01.0: reg 14 io port: [0x8014-0x8017]
>pci 0000:0b:01.0: reg 18 io port: [0x8018-0x801f]
>pci 0000:0b:01.0: reg 1c io port: [0x8010-0x8013]
>pci 0000:0b:01.0: reg 20 io port: [0x8000-0x800f]
>pci 0000:0b:01.0: supports D1 D2
>pci 0000:0b:02.0: reg 10 32bit mmio: [0xa0000000-0xa0000fff]
>pci 0000:0b:02.0: supports D1 D2
>pci 0000:0b:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0b:02.0: PME# disabled
>pci 0000:0b:02.1: reg 10 32bit mmio: [0xa0001000-0xa0001fff]
>pci 0000:0b:02.1: supports D1 D2
>pci 0000:0b:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0b:02.1: PME# disabled
>pci 0000:04:03.0: transparent bridge
>pci 0000:04:03.0: bridge io port: [0x00-0xfff]
>pci 0000:04:03.0: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:04:03.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.DOCK._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>pci 0000:04:03.0: BAR 7: can't allocate resource
>pci 0000:04:03.0: BAR 8: can't allocate resource
>pci 0000:04:03.0: BAR 9: can't allocate resource
>Expanded resource reserved due to conflict with Adapter ROM
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x4fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x1641 has been reserved
>system 00:02: ioport range 0x1644-0x167f has been reserved
>system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0x90100000-0x901fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.2:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.2:   MEM window: 0x90200000-0x902fffff
>pci 0000:00:1c.2:   PREFETCH window: 0x000000c0000000-0x000000c00fffff
>pci 0000:04:00.0: CardBus bridge, secondary bus 0000:12
>pci 0000:04:00.0:   IO window: 0x005000-0x0050ff
>pci 0000:04:00.0:   IO window: 0x005400-0x0054ff
>pci 0000:04:00.0:   PREFETCH window: 0xc8000000-0xcbffffff
>pci 0000:04:00.0:   MEM window: 0x94000000-0x97ffffff
>pci 0000:0b:02.0: CardBus bridge, secondary bus 0000:0c
>pci 0000:0b:02.0:   IO window: 0x004000-0x0040ff
>pci 0000:0b:02.0:   IO window: 0x004400-0x0044ff
>pci 0000:0b:02.0:   PREFETCH window: 0x64000000-0x67ffffff
>pci 0000:0b:02.0:   MEM window: 0x98000000-0x9bffffff
>pci 0000:0b:02.1: CardBus bridge, secondary bus 0000:10
>pci 0000:0b:02.1:   IO window: 0x004800-0x0048ff
>pci 0000:0b:02.1:   IO window: 0x004c00-0x004cff
>pci 0000:0b:02.1:   PREFETCH window: 0x68000000-0x6bffffff
>pci 0000:0b:02.1:   MEM window: 0x9c000000-0x9fffffff
>pci 0000:04:03.0: PCI bridge, secondary bus 0000:0b
>pci 0000:04:03.0:   IO window: 0x4000-0x4fff
>pci 0000:04:03.0:   MEM window: 0x98000000-0x9fffffff
>pci 0000:04:03.0:   PREFETCH window: 0x00000064000000-0x0000006bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: 0x4000-0x8fff
>pci 0000:00:1e.0:   MEM window: 0x90300000-0xa00fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000c8000000-0x000000cfffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:0b:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>pci 0000:0b:02.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>bus: 00 index 0 io port: [0x00-0xffff]
>bus: 00 index 1 mmio: [0x000000-0xffffffff]
>bus: 02 index 0 mmio: [0x0-0x0]
>bus: 02 index 1 mmio: [0x90100000-0x901fffff]
>bus: 02 index 2 mmio: [0x0-0x0]
>bus: 02 index 3 mmio: [0x0-0x0]
>bus: 03 index 0 io port: [0x3000-0x3fff]
>bus: 03 index 1 mmio: [0x90200000-0x902fffff]
>bus: 03 index 2 mmio: [0xc0000000-0xc00fffff]
>bus: 03 index 3 mmio: [0x0-0x0]
>bus: 04 index 0 io port: [0x4000-0x8fff]
>bus: 04 index 1 mmio: [0x90300000-0xa00fffff]
>bus: 04 index 2 mmio: [0xc8000000-0xcfffffff]
>bus: 04 index 3 io port: [0x00-0xffff]
>bus: 04 index 4 mmio: [0x000000-0xffffffff]
>bus: 12 index 0 io port: [0x5000-0x50ff]
>bus: 12 index 1 io port: [0x5400-0x54ff]
>bus: 12 index 2 mmio: [0xc8000000-0xcbffffff]
>bus: 12 index 3 mmio: [0x94000000-0x97ffffff]
>bus: 0b index 0 io port: [0x4000-0x4fff]
>bus: 0b index 1 mmio: [0x98000000-0x9fffffff]
>bus: 0b index 2 mmio: [0x64000000-0x6bffffff]
>bus: 0b index 3 io port: [0x4000-0x8fff]
>bus: 0b index 4 mmio: [0x90300000-0xa00fffff]
>bus: 0b index 5 mmio: [0xc8000000-0xcfffffff]
>bus: 0b index 6 io port: [0x00-0xffff]
>bus: 0b index 7 mmio: [0x000000-0xffffffff]
>bus: 0c index 0 io port: [0x4000-0x40ff]
>bus: 0c index 1 io port: [0x4400-0x44ff]
>bus: 0c index 2 mmio: [0x64000000-0x67ffffff]
>bus: 0c index 3 mmio: [0x98000000-0x9bffffff]
>bus: 10 index 0 io port: [0x4800-0x48ff]
>bus: 10 index 1 io port: [0x4c00-0x4cff]
>bus: 10 index 2 mmio: [0x68000000-0x6bffffff]
>bus: 10 index 3 mmio: [0x9c000000-0x9fffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 2812k freed
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1228715934.911:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1735
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pcieport-driver 0000:00:1c.0: irq 1279 for MSI/MSI-X
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pcieport-driver 0000:00:1c.2: irq 1278 for MSI/MSI-X
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (57 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>serial 0000:00:1e.3: PCI INT B disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>ahci 0000:00:1f.2: version 3.0
>ahci: probe of 0000:00:1f.2 failed with error -22
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata1.00: ATA-6: TOSHIBA MK4026GAX RoHS, PA107E, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: HL-DT-STDVD-ROM GDR-8084N, 1.01, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4026GA PA10 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8084N 1.01 PQ: 0 ANSI: 5
>yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0560]
>yenta_cardbus 0000:04:00.0: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:04:00.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:04:00.0: TI: mfunc 0x01d21b22, devctl 0x64
>yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:04:00.0: Socket status: 30000086
>pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #11 to #15
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0xa00fffff
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff
>yenta_cardbus 0000:0b:02.0: CardBus bridge found [1014:0148]
>yenta_cardbus 0000:0b:02.0: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:0b:02.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:0b:02.0: TI: mfunc 0x00001002, devctl 0x66
>yenta_cardbus 0000:0b:02.0: ISA IRQ mask 0x0cb8, PCI irq 22
>yenta_cardbus 0000:0b:02.0: Socket status: 30000006
>yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff: clean.
>yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0x98000000 - 0x9fffffff
>yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0x64000000 - 0x6bffffff
>yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0xa00fffff
>yenta_cardbus 0000:0b:02.0: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff
>yenta_cardbus 0000:0b:02.1: CardBus bridge found [1014:0148]
>yenta_cardbus 0000:0b:02.1: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:0b:02.1: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:0b:02.1: TI: mfunc 0x00001002, devctl 0x66
>yenta_cardbus 0000:0b:02.1: ISA IRQ mask 0x0cb8, PCI irq 22
>yenta_cardbus 0000:0b:02.1: Socket status: 30000006
>yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>pcmcia_socket pcmcia_socket2: cs: IO port probe 0x4000-0x4fff: clean.
>yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0x98000000 - 0x9fffffff
>yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0x64000000 - 0x6bffffff
>yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0xa00fffff
>yenta_cardbus 0000:0b:02.1: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 308k freed
>Write protecting the kernel text: 2276k
>Write protecting the kernel read-only data: 1200k
>Marking TSC unstable due to TSC halts in idle
>input: AT Translated Set 2 keyboard as /class/input/input1
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90040000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<4>Clocksource tsc unstable (delta = -243463707 ns)
> sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>pata_cmd64x 0000:0b:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>scsi2 : pata_cmd64x
>scsi3 : pata_cmd64x
>ata3: PATA max UDMA/66 cmd 0x8020 ctl 0x8014 bmdma 0x8000 irq 21
>ata4: PATA max UDMA/66 cmd 0x8018 ctl 0x8010 bmdma 0x8008 irq 21
>pata_cmd64x: active 10 recovery 10 setup 3.
>pata_cmd64x: active 10 recovery 10 setup 3.
>pata_cmd64x: active 10 recovery 10 setup 3.
>pata_cmd64x: active 10 recovery 10 setup 3.
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Optical Mouse as /class/input/input3
>generic-usb 0003:046D:C019.0001: input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1228715941.171:2): selinux=0 auid=4294967295 ses=4294967295
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input4
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean.
>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
>intel_rng: FWH not detected
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>input: PC Speaker as /class/input/input5
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SLPB]
>ieee80211_crypt: registered algorithm 'NULL'
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>iTCO_vendor_support: vendor-support=0
>tg3.c:v3.94 (August 14, 2008)
>tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:00.0: setting latency timer to 64
>eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:41:52:56:53
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>NET: Registered protocol family 23
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>firewire_ohci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci: Added fw-ohci device 0000:04:00.1, OHCI version 1.10
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>nsc-ircc 00:0c: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200 0000:04:02.0: firmware: requesting ipw2200-bss.fw
>thinkpad_acpi: ThinkPad ACPI Extras v0.21
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 70ET64WW (1.24 ), EC 70HT27WW-1.04
>thinkpad_acpi: IBM ThinkPad R52, model 185897C
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
>input: ThinkPad Extra Buttons as /class/input/input9
>firewire_core: created device fw0: GUID 00061b03290719a5, S400
>ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50447 usecs
>intel8x0: clocking to 48000
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda4, internal journal
>Adding 522104k swap on /dev/sda3.  Priority:-1 extents:1 across:522104k
>platform microcode: firmware: requesting intel-ucode/06-0d-08
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: power state changed by ACPI to D0
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>compiz[2749]: segfault at 20 ip 080537ad sp bfb1fd10 error 4 in compiz[8047000+33000]
>thinkpad_acpi: CMOS NVRAM (7) and EC (6) do not agree on display brightness level

Actions: View

Attachments on bug 18940: 20881 | 20882 | 20884

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.