Attachment 3854 Details for Bug 5111 – kernel log

kernel log

dmesg (text/plain), 11.17 KB, created by Kyle Robert on 2005-11-21 06:07:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kyle Robert

Created: 2005-11-21 06:07:09 UTC

Size: 11.17 KB

patch

obsolete

>Linux version 2.6.12-gentoo-r10 (root@thread) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 SMP Fri Sep 30 12:14:49 EDT 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
> BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS)
> BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>319MB LOWMEM available.
>found SMP MP-table at 000f5ae0
>On node 0 totalpages: 81904
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 77808 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.2 present.
>ACPI: RSDP (v000 ABIT                                  ) @ 0x000f7370
>ACPI: RSDT (v001 ABIT   AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x13ff3000
>ACPI: FADT (v001 ABIT   AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x13ff3040
>ACPI: MADT (v001 ABIT            0x00000000  0x00000000) @ 0x13ff5280
>ACPI: DSDT (v001 ABIT   AWRDACPI 0x00001000 INTL 0x20031203) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:6 APIC version 17
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:6 APIC version 17
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
>I/O APIC #2 Version 17 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 14000000 (gap: 14000000:eac00000)
>Built 1 zonelists
>Kernel command line: root=/dev/hde3 noapic parport=auto
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 534.609 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 320688k/327616k available (2051k kernel code, 6440k reserved, 935k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 1052.67 BogoMIPS (lpj=526336)
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Checking 'hlt' instruction... OK.
>ACPI: setting ELCR to 0200 (from 1c80)
>CPU0: Intel Celeron (Mendocino) stepping 05
>Booting processor 1/1 eip 2000
>Initializing CPU#1
>Calibrating delay loop... 1064.96 BogoMIPS (lpj=532480)
>CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Celeron (Mendocino) stepping 05
>Total of 2 processors activated (2117.63 BogoMIPS).
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 3
>  groups: 1 2
>CPU1 attaching sched-domain:
> domain 0: span 3
>  groups: 2 1
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Subsystem revision 20050309
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>audit: initializing netlink socket (disabled)
>audit(1128103813.709:0): initialized
>inotify device minor=63
>Initializing Cryptographic API
>Limiting direct PCI/PCI transfers.
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 32M @ 0xda000000
>[drm] Initialized drm 1.0.0 20040925
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
>[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
>ACPI: Power Button (FF) [PWRF]
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (36 C)
>isapnp: Scanning for PnP cards...
>pnp: SB audio device quirk - increasing port range
>pnp: AWE32 quirk - adding two ports
>isapnp: Card 'Creative SB AWE64  PnP'
>isapnp: 1 Plug & Play card detected total
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>mice: PS/2 mouse device common for all mice
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>loop: loaded (max 8 devices)
>pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xb400. Vers LK1.1.19
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>0000:00:0b.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xb800. Vers LK1.1.19
>eth1: Dropping NETIF_F_SG since no checksum feature.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>PDC20267: IDE controller at PCI slot 0000:00:0d.0
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PDC20267: chipset revision 2
>PDC20267: 100% native mode on irq 10
>PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
>    ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:DMA, hdf:DMA
>    ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:DMA, hdh:pio
>Probing IDE interface ide2...
>hde: MAXTOR 6L020J1, ATA DISK drive
>ide2 at 0xbc00-0xbc07,0xc002 on irq 10
>Probing IDE interface ide3...
>hdg: WDC WD2500JB-00GVA0, ATA DISK drive
>ide3 at 0xc400-0xc407,0xc802 on irq 10
>HPT366: onboard version of chipset, pin1=1 pin2=2
>HPT366: IDE controller at PCI slot 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>HPT366: chipset revision 1
>HPT366: 100% native mode on irq 11
>    ide4: BM-DMA at 0xd800-0xd807, BIOS settings: hdi:pio, hdj:pio
>ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>    ide5: BM-DMA at 0xe400-0xe407, BIOS settings: hdk:pio, hdl:pio
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hde: max request size: 128KiB
>hde: 39851760 sectors (20404 MB) w/1819KiB Cache, CHS=39535/16/63, UDMA(100)
>hde: cache flushes supported
> hde: hde1 hde2 hde3
>hdg: max request size: 128KiB
>hdg: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
>hdg: cache flushes supported
> hdg: hdg1
>hda: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
>uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 12, io base 0x0000b000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>i2c /dev entries driver
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>NET: Registered protocol family 2
>IP: routing cache hash table of 2048 buckets, 16Kbytes
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>ip_conntrack version 2.1 (2559 buckets, 20472 max) - 216 bytes per conntrack
>ip_tables: (C) 2000-2002 Netfilter core team
>ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
>arp_tables: (C) 2002 David S. Miller
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Starting balanced_irq
>ReiserFS: hde3: found reiserfs format "3.6" with standard journal
>ReiserFS: hde3: using ordered data mode
>ReiserFS: hde3: journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hde3: checking transaction log (hde3)
>ReiserFS: hde3: Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly.
>Freeing unused kernel memory: 204k freed
>Adding 506036k swap on /dev/hde2.  Priority:-1 extents:1
>ReiserFS: hdg1: found reiserfs format "3.6" with standard journal
>ReiserFS: hdg1: using ordered data mode
>ReiserFS: hdg1: journal params: device hdg1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hdg1: checking transaction log (hdg1)
>ReiserFS: hdg1: Using r5 hash to sort names

Actions: View

Attachments on bug 5111: 3854 | 3855

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.