Attachment 39615 Details for Bug 31035 – dmesg

[patch] dmesg

dmesg (text/plain), 83.17 KB, created by Maximiliano Castañón on 2010-10-21 13:30:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Maximiliano Castañón

Created: 2010-10-21 13:30:32 UTC

Size: 83.17 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32.21-166.fc12.i686.PAE (mockbuild@x86-01.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Aug 27 06:33:34 UTC 2010
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000b7ec0000 (usable)
> BIOS-e820: 00000000b7ec0000 - 00000000b7ed8000 (ACPI data)
> BIOS-e820: 00000000b7ed8000 - 00000000b7eda000 (ACPI NVS)
> BIOS-e820: 00000000b7eda000 - 00000000c8000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x138000 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-E3FFF uncachable
>  E4000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFE0000000 write-back
>  2 base 00A0000000 mask FFF0000000 write-back
>  3 base 00B0000000 mask FFF8000000 write-back
>  4 base 00B8000000 mask FFFC000000 write-back
>  5 base 00BC000000 mask FFFE000000 write-back
>  6 disabled
>  7 disabled
>TOM2: 0000000138000000 aka 4992M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 01000000
>init_memory_mapping: 0000000000000000-00000000375fe000
>NX (Execute Disable) protection: active
> 0000000000 - 0000200000 page 4k
> 0000200000 - 0037400000 page 2M
> 0037400000 - 00375fe000 page 4k
>kernel direct mapping tables up to 375fe000 @ 10000-18000
>RAMDISK: 374d4000 - 37fefa50
>Allocated new RAMDISK: 00b6b000 - 01686a50
>Move RAMDISK from 00000000374d4000 - 0000000037fefa4f to 00b6b000 - 01686a4f
>ACPI: RSDP 000f8120 00024 (v02 PTLTD )
>ACPI: XSDT b7ecc915 00054 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
>ACPI: FACP b7ed799c 000F4 (v03 AMD    ANT      06040000 ATI  000F4240)
>ACPI: DSDT b7ecc969 0B033 (v01    ATI    SB700 06040000 MSFT 03000001)
>ACPI: FACS b7ed9fc0 00040
>ACPI: SLIC b7ed7b04 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
>ACPI: SSDT b7ed7c7a 002B4 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
>ACPI: APIC b7ed7f2e 0005E (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: MCFG b7ed7f8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
>ACPI: HPET b7ed7fc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
>ACPI: Local APIC address 0xfee00000
>4106MB HIGHMEM available.
>885MB LOWMEM available.
>  mapped low ram: 0 - 375fe000
>  low ram: 0 - 375fe000
>  node 0 low ram: 00000000 - 375fe000
>  node 0 bootmap 00014000 - 0001aec0
>(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000b61c38]    TEXT DATA BSS ==> [0000400000 - 0000b61c38]
>  #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
>  #5 [0000b62000 - 0000b6a1a0]              BRK ==> [0000b62000 - 0000b6a1a0]
>  #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
>  #7 [0000b6b000 - 0001686a50]      NEW RAMDISK ==> [0000b6b000 - 0001686a50]
>  #8 [0000014000 - 000001b000]          BOOTMAP ==> [0000014000 - 000001b000]
>found SMP MP-table at [c00f8270] f8270
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000375fe
>  HighMem  0x000375fe -> 0x00138000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009d
>    0: 0x00000100 -> 0x000b7ec0
>    0: 0x00100000 -> 0x00138000
>On node 0 totalpages: 982605
>free_area_init_node: node 0, pgdat c09d8aa0, node_mem_map c1688200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3949 pages, LIFO batch:0
>  Normal zone: 1740 pages used for memmap
>  Normal zone: 220978 pages, LIFO batch:31
>  HighMem zone: 8213 pages used for memmap
>  HighMem zone: 747693 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x43538301 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
>Allocating PCI resources starting at c8000000 (gap: c8000000:18000000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 15 pages/cpu @c3e00000 s37848 r0 d23592 u1048576
>pcpu-alloc: s37848 r0 d23592 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 972620
>Kernel command line: ro root=/dev/mapper/vg_gateway-lv_root rhgb quiet pmp=0 SYSFONT=latarcyrheb-sun16 LANG=es_ES.UTF-8 KEYTABLE=es radeon.modeset=1
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 25558720 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000375fe:00138000)
>Memory: 3844648k/5111808k available (3762k kernel code, 84884k reserved, 2353k data, 564k init, 3023624k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc09fa000 - 0xc0a87000   ( 564 kB)
>      .data : 0xc07aca74 - 0xc09f9158   (2353 kB)
>      .text : 0xc0400000 - 0xc07aca74   (3762 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 1 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 2100.091 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.18 BogoMIPS (lpj=2100091)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 22772 entries in 45 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>CPU0: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 96431133 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (8390.14 BogoMIPS).
>sizeof(vma)=92 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=508 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=3252 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>devtmpfs: initialized
>regulator: core version 0.5
>Time:  3:56:18  Date: 10/20/10
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 14
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: OEMN b7ed8bd2 0020A (v01 AMD    NAHP     00000001 MSFT 03000001)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:11.0: reg 10 io port: [0x8420-0x8427]
>pci 0000:00:11.0: reg 14 io port: [0x8414-0x8417]
>pci 0000:00:11.0: reg 18 io port: [0x8418-0x841f]
>pci 0000:00:11.0: reg 1c io port: [0x8410-0x8413]
>pci 0000:00:11.0: reg 20 io port: [0x8400-0x840f]
>pci 0000:00:11.0: reg 24 32bit mmio: [0xf0207000-0xf02073ff]
>pci 0000:00:11.0: set SATA to AHCI mode
>pci 0000:00:12.0: reg 10 32bit mmio: [0xf0004000-0xf0004fff]
>pci 0000:00:12.1: reg 10 32bit mmio: [0xf0005000-0xf0005fff]
>pci 0000:00:12.2: reg 10 32bit mmio: [0xf0207400-0xf02074ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: reg 10 32bit mmio: [0xf0006000-0xf0006fff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xf0207800-0xf02078ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.2: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
>pci 0000:01:05.0: reg 18 32bit mmio: [0xcfdf0000-0xcfdfffff]
>pci 0000:01:05.0: reg 24 32bit mmio: [0xcfe00000-0xcfefffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:01:05.1: reg 10 32bit mmio: [0xcfdec000-0xcfdeffff]
>pci 0000:01:05.1: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xcfd00000-0xcfefffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0xf0300000-0xf030ffff]
>pci 0000:03:00.0: PME# supported from D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:04.0: bridge 32bit mmio: [0xf0300000-0xf03fffff]
>pci 0000:09:00.0: reg 10 64bit mmio: [0xf0400000-0xf040ffff]
>pci 0000:09:00.0: supports D1
>pci 0000:09:00.0: PME# supported from D0 D1 D3hot
>pci 0000:09:00.0: PME# disabled
>pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:06.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
>pci 0000:00:07.0: bridge io port: [0x00-0xfff]
>pci 0000:00:07.0: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:07.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
>pci 0000:00:14.4: transparent bridge
>pci 0000:00:14.4: bridge io port: [0x00-0xfff]
>pci 0000:00:14.4: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:14.4: bridge 32bit mmio pref: [0x000000-0x0fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:07.0: BAR 13: can't allocate resource
>pci 0000:00:07.0: BAR 14: can't allocate resource
>pci 0000:00:07.0: BAR 15: can't allocate resource
>pci 0000:00:14.4: BAR 13: can't allocate resource
>pci 0000:00:14.4: BAR 14: can't allocate resource
>pci 0000:00:14.4: BAR 15: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:06: ioport range 0x220-0x22f has been reserved
>system 00:06: ioport range 0x40b-0x40b has been reserved
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x4d6-0x4d6 has been reserved
>system 00:06: ioport range 0x530-0x537 has been reserved
>system 00:06: ioport range 0xc00-0xc01 has been reserved
>system 00:06: ioport range 0xc14-0xc14 has been reserved
>system 00:06: ioport range 0xc50-0xc52 has been reserved
>system 00:06: ioport range 0xc6c-0xc6c has been reserved
>system 00:06: ioport range 0xc6f-0xc6f has been reserved
>system 00:06: ioport range 0xcd0-0xcd1 has been reserved
>system 00:06: ioport range 0xcd2-0xcd3 has been reserved
>system 00:06: ioport range 0xcd4-0xcd5 has been reserved
>system 00:06: ioport range 0xcd6-0xcd7 has been reserved
>system 00:06: ioport range 0xcd8-0xcdf has been reserved
>system 00:06: ioport range 0x8000-0x805f has been reserved
>system 00:06: ioport range 0xf40-0xf47 has been reserved
>system 00:06: ioport range 0x87f-0x87f has been reserved
>system 00:06: iomem range 0xff800000-0xffefffff has been reserved
>system 00:06: iomem range 0xfec10000-0xfec1001f has been reserved
>system 00:07: iomem range 0xe0000-0xfffff could not be reserved
>system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x9000-0x9fff
>pci 0000:00:01.0:   MEM window: 0xcfd00000-0xcfefffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:04.0:   IO window: disabled
>pci 0000:00:04.0:   MEM window: 0xf0300000-0xf03fffff
>pci 0000:00:04.0:   PREFETCH window: disabled
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
>pci 0000:00:06.0:   IO window: disabled
>pci 0000:00:06.0:   MEM window: 0xf0400000-0xf04fffff
>pci 0000:00:06.0:   PREFETCH window: disabled
>pci 0000:00:07.0: PCI bridge, secondary bus 0000:0c
>pci 0000:00:07.0:   IO window: 0x1000-0x1fff
>pci 0000:00:07.0:   MEM window: 0xc8000000-0xc81fffff
>pci 0000:00:07.0:   PREFETCH window: 0x000000c8200000-0x000000c83fffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:0f
>pci 0000:00:14.4:   IO window: disabled
>pci 0000:00:14.4:   MEM window: disabled
>pci 0000:00:14.4:   PREFETCH window: disabled
>pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:07.0: enabling device (0000 -> 0003)
>pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:07.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
>pci_bus 0000:01: resource 1 mem: [0xcfd00000-0xcfefffff]
>pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
>pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff]
>pci_bus 0000:09: resource 1 mem: [0xf0400000-0xf04fffff]
>pci_bus 0000:0c: resource 0 io:  [0x1000-0x1fff]
>pci_bus 0000:0c: resource 1 mem: [0xc8000000-0xc81fffff]
>pci_bus 0000:0c: resource 2 pref mem [0xc8200000-0xc83fffff]
>pci_bus 0000:0f: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:0f: resource 1 mem: [0x0-0xfffff]
>pci_bus 0000:0f: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:0f: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:0f: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:01:05.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 11374k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1287546978.564:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1627
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:04.0: setting latency timer to 64
>pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
>pcieport 0000:00:06.0: setting latency timer to 64
>pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
>pcieport 0000:00:07.0: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Firmware did not grant requested _OSC control
>Firmware did not grant requested _OSC control
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp: Slot [1] registered
>pci-stub: invalid id string ""
>ACPI: AC Adapter [ADP1] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZS0] (86 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZS1] (79 C)
>isapnp: Scanning for PnP cards...
>ACPI: Battery Slot [BAT0] (battery present)
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input4
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207280 irq 22
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0207400
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ehci_hcd
>usb usb1: SerialNumber: 0000:00:12.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0207800
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ehci_hcd
>usb usb2: SerialNumber: 0000:00:13.2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0004000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ohci_hcd
>usb usb3: SerialNumber: 0000:00:12.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0005000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ohci_hcd
>usb usb4: SerialNumber: 0000:00:12.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0006000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 14:732:917
>rtc_cmos 00:04: setting system clock to 2010-10-20 03:56:19 UTC (1287546979)
>Initalizing network drop monitor service
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>usb 2-5: new high speed USB device using ehci_hcd and address 2
>ata2: softreset failed (device not ready)
>ata2: applying SB600 PMP SRST workaround and retrying
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>usb 2-5: New USB device found, idVendor=064e, idProduct=a103
>usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 2-5: Product: Video WebCam
>usb 2-5: Manufacturer: SuYin
>usb 2-5: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
>usb 2-5: configuration #1 chosen from 1 choice
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-8: ST9320320AS, 0303, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST9320320AS      0303 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>ata2.00: ATAPI: HL-DT-ST DVDRAM GT20N, CP02, max UDMA/133
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT20N     CP02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
> sda1 sda2 sda3 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 564k freed
>Write protecting the kernel text: 3764k
>Write protecting the kernel read-only data: 1768k
>dracut: dracut-005-2.fc12
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:05.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xCFDF0000
>[drm] register mmio size: 65536
>ATOM BIOS: Acer_SJV50PU
>[drm] Clocks initialized !
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 32bits DDR
>[TTM] Zone  kernel: Available graphics memory: 416926 kiB.
>[TTM] Zone highmem: Available graphics memory: 1928738 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RS780 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
>platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
>[drm] ring test succeeded in 0 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   LVDS
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_KLDSCP_LVTMA
>[drm] Connector 1:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 2:
>[drm]   HDMI-A
>[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm] fb mappable at 0xD0141000
>[drm] vram apper at 0xD0000000
>[drm] size 4325376
>[drm] fb depth is 24
>[drm]    pitch is 5632
>fbcon: radeondrmfb (fb0) is primary device
>Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
>Console: switching to colour frame buffer device 170x48
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
>dracut: Starting plymouth daemon
>acpi device:25: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input7
>ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
>dracut: Scanning devices sda2  for LVM volume groups 
>dracut: Couldn't find device with uuid c3okcy-QNBu-MFUy-ttgW-YQFX-8uIv-yABzNE.
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "vg_gateway" using metadata type lvm2
>dracut: Couldn't find device with uuid c3okcy-QNBu-MFUy-ttgW-YQFX-8uIv-yABzNE.
>dracut: 2 logical volume(s) in volume group "vg_gateway" now active
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/vg_gateway-lv_root
>dracut: Loading SELinux policy
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1287546983.294:2): selinux=0 auid=4294967295 ses=4294967295
>dracut: /sbin/load_policy: no se puede cargar la polÃtica: No existe el fichero o el directorio
>dracut: Switching root
>udev: starting version 145
>ACPI: WMI: Mapper loaded
>tg3.c:v3.102 (September 1, 2009)
>tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:03:00.0: setting latency timer to 64
>Linux video capture interface: v2.00
>eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:1f:16:a8:a9:c1
>eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>acer-wmi: Acer Laptop ACPI-WMI Extras
>acer-wmi: Brightness must be controlled by generic video driver
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
>uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
>uvcvideo: Forcing device quirks 0x2 by module parameter for testing purpose.
>uvcvideo: Please report required quirks to the linux-uvc-devel mailing list.
>input: Video WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input8
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ath9k 0000:09:00.0: setting latency timer to 64
>input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
>input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
>input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
>HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.1: setting latency timer to 64
>ath: EEPROM regdomain: 0x60
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x60
>phy0: Selected rate control algorithm 'ath9k_rate_control'
>Registered led device: ath9k-phy0::radio
>Registered led device: ath9k-phy0::assoc
>Registered led device: ath9k-phy0::tx
>Registered led device: ath9k-phy0::rx
>phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8ae0000, irq=18
>cfg80211: Calling CRDA for country: CL
>cfg80211: Regulatory domain changed to country: CL
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
>vboxdrv: counter framework which can generate NMIs is active. You have to prevent
>vboxdrv: the usage of hardware performance counters by
>vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=1 offMin=0x5bf0b49 offMax=0x5bf0b49
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001).
>device-mapper: multipath: version 1.1.0 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
>EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 5636785
>EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 5636568
>EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 5641046
>EXT4-fs (sda5): 3 orphan inodes deleted
>EXT4-fs (sda5): recovery complete
>EXT4-fs (sda5): mounted filesystem with ordered data mode
>Adding 5029880k swap on /dev/mapper/vg_gateway-lv_swap.  Priority:-1 extents:1 across:5029880k 
>powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-64 processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (2100 MHz)
>powernow-k8:    1 : pstate 1 (1050 MHz)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>tg3 0000:03:00.0: irq 28 for MSI/MSI-X
>hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
>fuse init (API version 7.13)
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1)
>wlan0: associated
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>tg3: eth0: Link is down.
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>ath9k: Two wiphys trying to scan at the same time
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1)
>wlan0: associated
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>ath9k: Two wiphys trying to scan at the same time
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1)
>wlan0: associated
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>tg3: eth0: Link is down.
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>tg3: eth0: Link is down.
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>tg3: eth0: Link is down.
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>tg3: eth0: Link is down.
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3)
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1)
>wlan0: associated
>padlock: VIA PadLock not detected.
>tg3: eth0: Link is down.
>No probe response from AP 00:27:19:dc:33:5e after 500ms, disconnecting.
>wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1)
>wlan0: associated
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>tg3 0000:03:00.0: PME# enabled
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>ath9k 0000:09:00.0: PCI INT A disabled
>HDA Intel 0000:01:05.1: PCI INT B disabled
>ACPI handle has no context!
>radeon 0000:01:05.0: PCI INT A disabled
>HDA Intel 0000:00:14.2: PCI INT A disabled
>HDA Intel 0000:00:14.2: power state changed by ACPI to D3
>ehci_hcd 0000:00:13.2: PCI INT B disabled
>ohci_hcd 0000:00:13.0: PCI INT A disabled
>ehci_hcd 0000:00:12.2: PCI INT B disabled
>ohci_hcd 0000:00:12.1: PCI INT A disabled
>ohci_hcd 0000:00:12.0: PCI INT A disabled
>ahci 0000:00:11.0: PCI INT A disabled
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching NULL sched-domain.
>Breaking affinity for irq 1
>Breaking affinity for irq 12
>Breaking affinity for irq 18
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>Back to C!
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
>CPU0 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
>pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xdff1d001)
>pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
>pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
>pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100407)
>ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
>ahci 0000:00:11.0: set SATA to AHCI mode
>ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
>ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
>ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
>ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
>HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa)
>HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
>pci 0000:00:14.4: restoring config space at offset 0x9 (was 0x0, writing 0xfff0)
>pci 0000:00:14.4: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>pci 0000:00:14.4: restoring config space at offset 0x7 (was 0x2800000, writing 0x228000f0)
>pci 0000:00:14.4: restoring config space at offset 0x1 (was 0x2a00000, writing 0x2a00004)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xcfdec000)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
>tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
>ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
>ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
>ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:05.0: setting latency timer to 64
>[drm] Clocks initialized !
>[drm] ring test succeeded in 0 usecs
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2: softreset failed (device not ready)
>ata2: applying SB600 PMP SRST workaround and retrying
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: configured for UDMA/133
>HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.1: setting latency timer to 64
>ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>sd 0:0:0:0: [sda] Starting disk
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>PM: Finishing wakeup.
>Restarting tasks ... done.
>tg3 0000:03:00.0: PME# disabled
>tg3 0000:03:00.0: irq 28 for MSI/MSI-X
>ath9k: Two wiphys trying to scan at the same time
>tg3 0000:03:00.0: PME# enabled
>tg3 0000:03:00.0: PME# disabled
>tg3 0000:03:00.0: irq 28 for MSI/MSI-X
>warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>ath9k 0000:09:00.0: PCI INT A disabled
>tg3 0000:03:00.0: PME# enabled
>HDA Intel 0000:01:05.1: PCI INT B disabled
>ACPI handle has no context!
>radeon 0000:01:05.0: f6007900 unpin not necessary
>radeon 0000:01:05.0: PCI INT A disabled
>HDA Intel 0000:00:14.2: PCI INT A disabled
>HDA Intel 0000:00:14.2: power state changed by ACPI to D3
>ehci_hcd 0000:00:13.2: PCI INT B disabled
>ohci_hcd 0000:00:13.0: PCI INT A disabled
>ehci_hcd 0000:00:12.2: PCI INT B disabled
>ohci_hcd 0000:00:12.1: PCI INT A disabled
>ohci_hcd 0000:00:12.0: PCI INT A disabled
>ahci 0000:00:11.0: PCI INT A disabled
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching NULL sched-domain.
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>Back to C!
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
>CPU0 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
>pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xdff1d001)
>pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100407)
>ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
>ahci 0000:00:11.0: set SATA to AHCI mode
>ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
>ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
>ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
>ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
>HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa)
>HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
>pci 0000:00:14.4: restoring config space at offset 0x9 (was 0x0, writing 0xfff0)
>pci 0000:00:14.4: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>pci 0000:00:14.4: restoring config space at offset 0x7 (was 0x2800000, writing 0x28000f0)
>pci 0000:00:14.4: restoring config space at offset 0x1 (was 0x2a00000, writing 0x2a00004)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xcfdec000)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
>tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
>ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
>ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
>ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:05.0: setting latency timer to 64
>[drm] Clocks initialized !
>[drm] ring test succeeded in 0 usecs
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2: softreset failed (device not ready)
>ata2: applying SB600 PMP SRST workaround and retrying
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: configured for UDMA/133
>HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.1: setting latency timer to 64
>tg3 0000:03:00.0: PME# disabled
>ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>sd 0:0:0:0: [sda] Starting disk
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>PM: Finishing wakeup.
>Restarting tasks ... done.
>wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3)
>wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:25:12:c2:f8:20 (try 1)
>wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1)
>wlan0: associated
>usb 2-5: reset high speed USB device using ehci_hcd and address 2
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-1: device not accepting address 2, error -62
>usb 3-1: new full speed USB device using ohci_hcd and address 3
>usb 3-1: device descriptor read/64, error -62
>usb 3-1: device descriptor read/64, error -62
>usb 3-1: new full speed USB device using ohci_hcd and address 4
>usb 3-1: device not accepting address 4, error -62
>usb 3-1: new full speed USB device using ohci_hcd and address 5
>usb 3-1: device not accepting address 5, error -62
>hub 3-0:1.0: unable to enumerate USB device on port 1
>usb 2-1: new high speed USB device using ehci_hcd and address 3
>usb 2-1: device not accepting address 3, error -71
>usb 5-1: new full speed USB device using ohci_hcd and address 2
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 3
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 4
>usb 5-1: device not accepting address 4, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 5
>usb 5-1: device not accepting address 5, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb 5-1: new full speed USB device using ohci_hcd and address 6
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 7
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 8
>usb 5-1: device not accepting address 8, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 9
>usb 5-1: device not accepting address 9, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb 5-1: new full speed USB device using ohci_hcd and address 10
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 11
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 12
>usb 5-1: device not accepting address 12, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 13
>usb 5-1: device not accepting address 13, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb 2-2: new high speed USB device using ehci_hcd and address 5
>usb 2-2: New USB device found, idVendor=152d, idProduct=2338
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
>usb 2-2: Product: USB to ATA/ATAPI Bridge
>usb 2-2: Manufacturer: JMicron
>usb 2-2: SerialNumber: 152D203380B6
>usb 2-2: configuration #1 chosen from 1 choice
>usb 5-1: new full speed USB device using ohci_hcd and address 14
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 5-1: device descriptor read/64, error -62
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 15
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 16
>usb 5-1: device not accepting address 16, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 17
>usb 5-1: device not accepting address 17, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:0: [sdb] Attached SCSI disk
>usb 5-1: new full speed USB device using ohci_hcd and address 18
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 19
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 20
>usb 5-1: device not accepting address 20, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 21
>usb 5-1: device not accepting address 21, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb 2-2: USB disconnect, address 5
>usb 5-1: new full speed USB device using ohci_hcd and address 22
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 23
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 24
>usb 5-1: device not accepting address 24, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 25
>usb 5-1: device not accepting address 25, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb 2-2: new high speed USB device using ehci_hcd and address 6
>usb 2-2: New USB device found, idVendor=152d, idProduct=2338
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
>usb 2-2: Product: USB to ATA/ATAPI Bridge
>usb 2-2: Manufacturer: JMicron
>usb 2-2: SerialNumber: 222256087707
>usb 2-2: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 5:0:0:0: Direct-Access     ST912082 2AS              C    PQ: 0 ANSI: 2 CCS
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 38 00 00
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2 < sdb5 >
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Attached SCSI disk
>usb 2-2: reset high speed USB device using ehci_hcd and address 6
>usb 2-2: reset high speed USB device using ehci_hcd and address 6
>usb 2-2: reset high speed USB device using ehci_hcd and address 6
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: reset high speed USB device using ehci_hcd and address 6
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: reset high speed USB device using ehci_hcd and address 6
>usb 2-2: device not accepting address 6, error -71
>usb 2-2: reset high speed USB device using ehci_hcd and address 6
>usb 2-2: device not accepting address 6, error -71
>usb 2-2: USB disconnect, address 6
>sd 5:0:0:0: Device offlined - not ready after error recovery
>sd 5:0:0:0: [sdb] Unhandled error code
>sd 5:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
>sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 60 d7 9f 00 00 90 00
>end_request: I/O error, dev sdb, sector 6346655
>Buffer I/O error on device sdb1, logical block 793324
>Buffer I/O error on device sdb1, logical block 793325
>Buffer I/O error on device sdb1, logical block 793326
>Buffer I/O error on device sdb1, logical block 793327
>Buffer I/O error on device sdb1, logical block 793328
>Buffer I/O error on device sdb1, logical block 793329
>Buffer I/O error on device sdb1, logical block 793330
>Buffer I/O error on device sdb1, logical block 793331
>Buffer I/O error on device sdb1, logical block 793332
>Buffer I/O error on device sdb1, logical block 793333
>sd 5:0:0:0: rejecting I/O to offline device
>sd 5:0:0:0: rejecting I/O to offline device
>sd 5:0:0:0: rejecting I/O to offline device
>sd 5:0:0:0: [sdb] Unhandled error code
>sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 60 d8 37 00 00 68 00
>end_request: I/O error, dev sdb, sector 6346807
>usb 2-2: new high speed USB device using ehci_hcd and address 7
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: new high speed USB device using ehci_hcd and address 8
>usb 2-2: device descriptor read/64, error -110
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: new high speed USB device using ehci_hcd and address 9
>usb 2-2: device not accepting address 9, error -71
>usb 2-2: new high speed USB device using ehci_hcd and address 10
>usb 2-2: device not accepting address 10, error -71
>hub 2-0:1.0: unable to enumerate USB device on port 2
>usb 5-1: new full speed USB device using ohci_hcd and address 26
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 27
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: device descriptor read/64, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 28
>usb 5-1: device not accepting address 28, error -62
>usb 5-1: new full speed USB device using ohci_hcd and address 29
>usb 5-1: device not accepting address 29, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 1
>usb 5-2: new full speed USB device using ohci_hcd and address 30
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: new full speed USB device using ohci_hcd and address 31
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: new full speed USB device using ohci_hcd and address 32
>usb 5-2: device not accepting address 32, error -62
>usb 5-2: new full speed USB device using ohci_hcd and address 33
>usb 5-2: device not accepting address 33, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 2
>usb 5-2: new full speed USB device using ohci_hcd and address 34
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: new full speed USB device using ohci_hcd and address 35
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: device descriptor read/64, error -62
>usb 5-2: new full speed USB device using ohci_hcd and address 36
>usb 5-2: device not accepting address 36, error -62
>usb 5-2: new full speed USB device using ohci_hcd and address 37
>usb 5-2: device not accepting address 37, error -62
>hub 5-0:1.0: unable to enumerate USB device on port 2
>usb 2-2: new high speed USB device using ehci_hcd and address 11
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: new high speed USB device using ehci_hcd and address 12
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: device descriptor read/64, error -71
>usb 2-2: new high speed USB device using ehci_hcd and address 13
>usb 2-2: device not accepting address 13, error -71
>hub 2-0:1.0: unable to enumerate USB device on port 2
>usb 2-2: new high speed USB device using ehci_hcd and address 15
>usb 2-2: New USB device found, idVendor=152d, idProduct=2338
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
>usb 2-2: Product: USB to ATA/ATAPI Bridge
>usb 2-2: Manufacturer: JMicron
>usb 2-2: SerialNumber: 222256087707
>usb 2-2: configuration #1 chosen from 1 choice
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 15
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     ST912082 2AS              C    PQ: 0 ANSI: 2 CCS
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>sd 6:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2 < sdb5 >
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] Attached SCSI disk
>usb 2-2: USB disconnect, address 15
>No probe response from AP 00:25:12:c2:f8:20 after 500ms, disconnecting.
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3)
>wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3)
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: deauthenticated from 00:27:19:dc:33:5e (Reason: 2)
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1)
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 2)
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 3)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1)
>wlan0: associated
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
>tg3 0000:03:00.0: PME# enabled
>wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3)
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>ath9k 0000:09:00.0: PCI INT A disabled
>HDA Intel 0000:01:05.1: PCI INT B disabled
>ACPI handle has no context!
>hrtimer: interrupt took 3097573 ns
>radeon 0000:01:05.0: f6007900 unpin not necessary
>radeon 0000:01:05.0: PCI INT A disabled
>HDA Intel 0000:00:14.2: PCI INT A disabled
>HDA Intel 0000:00:14.2: power state changed by ACPI to D3
>ehci_hcd 0000:00:13.2: PCI INT B disabled
>ohci_hcd 0000:00:13.0: PCI INT A disabled
>ehci_hcd 0000:00:12.2: PCI INT B disabled
>ohci_hcd 0000:00:12.1: PCI INT A disabled
>ohci_hcd 0000:00:12.0: PCI INT A disabled
>ahci 0000:00:11.0: PCI INT A disabled
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching NULL sched-domain.
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>Back to C!
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
>CPU0 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
>pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xdff1d001)
>pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100407)
>ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
>ahci 0000:00:11.0: set SATA to AHCI mode
>ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
>ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
>ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
>ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
>HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa)
>HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
>pci 0000:00:14.4: restoring config space at offset 0x9 (was 0x0, writing 0xfff0)
>pci 0000:00:14.4: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>pci 0000:00:14.4: restoring config space at offset 0x7 (was 0x2800000, writing 0x28000f0)
>pci 0000:00:14.4: restoring config space at offset 0x1 (was 0x2a00000, writing 0x2a00004)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xcfdec000)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
>HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
>tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
>ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
>ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
>ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: power state changed by ACPI to D0
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>radeon 0000:01:05.0: setting latency timer to 64
>[drm] Clocks initialized !
>[drm] ring test succeeded in 0 usecs
>[drm] ib test succeeded in 0 usecs
>[drm] Enabling audio support
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2: softreset failed (device not ready)
>ata2: applying SB600 PMP SRST workaround and retrying
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: configured for UDMA/133
>HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.1: setting latency timer to 64
>ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>sd 0:0:0:0: [sda] Starting disk
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>PM: Finishing wakeup.
>Restarting tasks ... done.
>tg3 0000:03:00.0: PME# disabled
>tg3 0000:03:00.0: irq 28 for MSI/MSI-X
>ath9k: Two wiphys trying to scan at the same time
>wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3)
>wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:27:19:dc:33:5e (try 1)
>wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1)
>wlan0: associated
>usb 2-2: new high speed USB device using ehci_hcd and address 16
>usb 2-2: New USB device found, idVendor=0cf3, idProduct=9271
>usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
>usb 2-2: Product: USB2.0 WLAN
>usb 2-2: Manufacturer: ATHEROS
>usb 2-2: SerialNumber: 12345
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-5: reset high speed USB device using ehci_hcd and address 2
>usb 2-2: USB disconnect, address 16

Actions: View | Splinter Review

Attachments on bug 31035: 39614 | 39615

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.