Attachment 6860 Details for Bug 8166 – dmesg for the NetBSD host to confirm vga card etc

dmesg for the NetBSD host to confirm vga card etc

g (text/plain), 11.47 KB, created by George Michaelson on 2006-09-07 02:25:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: George Michaelson

Created: 2006-09-07 02:25:46 UTC

Size: 11.47 KB

patch

obsolete

>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
>    The NetBSD Foundation, Inc.  All rights reserved.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
>    The Regents of the University of California.  All rights reserved.
>
>NetBSD 4.99.1 (GGM_ACPI) #0: Tue Sep  5 13:24:09 EST 2006
>	ggm@garlique.algebras.org:/data/Build/obj/usr/src/sys/arch/i386/compile/GGM_ACPI
>total memory = 1022 MB
>avail memory = 1000 MB
>timecounter: Timecounters tick every 10.000 msec
>timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
>timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
>BIOS32 rev. 0 found at 0xfd750
>PCI BIOS rev. 2.1 found at 0xfd8d6
>pcibios: config mechanism [1][x], special cycles [x][x], last bus 8
>PCI IRQ Routing Table rev. 1.0 found at 0xfdea0, size 272 bytes (15 entries)
>PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
>------------------------------------------
>  device vendor product pin PIRQ IRQ stage
>------------------------------------------
>000:29:0 0x8086 0x24c2   A  0x00  11  0    already assigned
>000:29:1 0x8086 0x24c4   B  0x03  11  0    already assigned
>000:29:2 0x8086 0x24c7   C  0x02  11  0    already assigned
>000:29:7 0x8086 0x24cd   D  0x07  11  0    already assigned
>000:31:1 0x8086 0x24ca   A  0x02  11  0    fixed up
>000:31:3 0x8086 0x24c3   B  0x01  11  0    already assigned
>000:31:5 0x8086 0x24c5   B  0x01  11  0    already assigned
>000:31:6 0x8086 0x24c6   B  0x01  11  0    already assigned
>001:00:0 0x1002 0x4c59   A  0x00  11  0    already assigned
>002:00:0 0x1180 0x0476   A  0x00  11  0    already assigned
>002:00:1 0x1180 0x0476   B  0x01  11  0    already assigned
>002:00:2 0x1180 0x0552   C  0x02  11  0    already assigned
>002:01:0 0x8086 0x101e   A  0x00  11  0    already assigned
>002:02:0 0x168c 0x1014   A  0x02  11  0    already assigned
>------------------------------------------
>mainbus0 (root)
>pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005800
>pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005808
>pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005810
>pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x0000580c
>pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x40000000
>cpu0 at mainbus0: (uniprocessor)
>cpu0: Intel Pentium M (Banias) (686-class), 599.52 MHz, id 0x695
>cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
>cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
>cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
>cpu0: features2 180<EST,TM2>
>cpu0: "Intel(R) Pentium(R) M processor 1600MHz"
>cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
>cpu0: using thermal monitor 2
>cpu0: Enhanced SpeedStep (956 mV) 600 MHz
>cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1400 1200 1000 800 600
>acpi0 at mainbus0: Advanced Configuration and Power Interface
>acpi0: using Intel ACPI CA subsystem version 20060217
>acpi0: X/RSDT: OemId <IBM   ,TP-1Q   ,00003020>, AslId < LTP,00000000>
>acpi0: found ECDT, GPE 28
>acpi0: SCI interrupting at int 9
>acpi0: fixed-feature power button present
>timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
>timecounter: selected timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
>ACPI-Fast 24-bit timer
>LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
>LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
>LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
>LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
>LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 11
>LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
>LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
>LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
>LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
>LNKC: ACPI: Found matching pin for 2.0.INTC at func 2: 11
>LNKA: ACPI: Found matching pin for 2.1.INTA at func 0: 11
>LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 11
>ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
>acpi: activated PNP0C0F
>acpi: activated PNP0C0F
>acpi: activated PNP0400
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C0F at acpi0 not configured
>PNP0C01 at acpi0 not configured
>acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
>acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
>PNP0A03 at acpi0 not configured
>PNP0C02 at acpi0 not configured
>PNP0000 at acpi0 not configured
>attimer1 at acpi0 (PNP0100): AT Timer
>attimer1: io 0x40-0x43 irq 0
>PNP0200 at acpi0 not configured
>pcppi1 at acpi0 (PNP0800)
>pcppi1: io 0x61
>midi0 at pcppi1: PC speaker (CPU-intensive output)
>sysbeep0 at pcppi1
>npx0 at acpi0 (PNP0C04)
>npx0: io 0xf0 irq 13
>npx0: using exception 16
>PNP0B00 at acpi0 not configured
>pckbc1 at acpi0 (PNP0303): kbd port
>pckbc1: io 0x60,0x64 irq 1
>pckbc2 at acpi0 (IBM3780): aux port
>pckbc2: irq 12
>com0 at acpi0 (PNP0501)
>com0: io 0x3f8-0x3ff irq 4
>com0: ns16550a, working fifo
>lpt0 at acpi0 (PNP0400)
>lpt0: io 0x3bc-0x3be irq 7
>com1 at acpi0 (IBM0071)
>com1: io 0x2f8-0x2ff irq 3 drq 3
>com1: ns16550a, working fifo
>acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
>acpiec0: io 0x62,0x66
>ACPI Object Type 'Power' (0x0b) at acpi0 not configured
>acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
>acpibat1 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
>acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
>IBM0068 at acpi0 not configured
>acpitz0 at acpi0: ACPI Thermal Zone
>acpitz0: unable to get polling interval; using default of 30.0s
>acpitz0: passive cooling mode only
>acpitz0: critical 91.0C passive 34.0C
>pcppi1: attached to attimer1
>pckbd0 at pckbc1 (kbd slot)
>pckbc1: using irq 1 for kbd slot
>wskbd0 at pckbd0: console keyboard
>pms0 at pckbc1 (aux slot)
>pckbc1: using irq 12 for aux slot
>wsmouse0 at pms0 mux 0
>pci0 at mainbus0 bus 0: configuration mode 1
>pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
>pchb0 at pci0 dev 0 function 0
>pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
>agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
>ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
>pci1 at ppb0 bus 1
>pci1: i/o space, memory space enabled
>vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M6 LY (rev. 0x00)
>wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
>wsmux1: connecting to wsdisplay0
>uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
>uhci0: interrupting at irq 11
>usb0 at uhci0: USB revision 1.0
>uhub0 at usb0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
>uhci1: interrupting at irq 11
>usb1 at uhci1: USB revision 1.0
>uhub1 at usb1
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
>uhci2: interrupting at irq 11
>usb2 at uhci2: USB revision 1.0
>uhub2 at usb2
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
>ehci0: interrupting at irq 11
>ehci0: BIOS has given up ownership
>ehci0: EHCI version 1.0
>ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
>usb3 at ehci0: USB revision 2.0
>uhub3 at usb3
>uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub3: 6 ports with 6 removable, self powered
>ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
>pci2 at ppb1 bus 2
>pci2: i/o space, memory space enabled
>cbb0 at pci2 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xaa)
>cbb1 at pci2 dev 0 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xaa)
>fwohci0 at pci2 dev 0 function 2: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x02)
>fwohci0: interrupting at irq 11
>fwohci0: OHCI version 1.0 (ROM=0)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:06:1b:03:10:03:af:90
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>ieee1394if0 at fwohci0: IEEE1394 bus
>fwip0 at ieee1394if0: IP over IEEE1394
>fwohci0: Initiate bus reset
>wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
>wm0: interrupting at irq 11
>wm0: 32-bit 33MHz PCI bus
>wm0: 64 word (6 address bits) MicroWire EEPROM
>wm0: Ethernet address 00:0d:60:80:47:94
>makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
>makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
>ath0 at pci2 dev 2 function 0
>ath0: interrupting at irq 11
>ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3
>cbb0: interrupting at irq 11
>cardslot0 at cbb0 slot 0 flags 0
>cardbus0 at cardslot0: bus 3
>pcmcia0 at cardslot0
>cbb1: interrupting at irq 11
>cardslot1 at cbb1 slot 1 flags 0
>cardbus1 at cardslot1: bus 4
>pcmcia1 at cardslot1
>ichlpcib0 at pci0 dev 31 function 0
>ichlpcib0: Intel 82801DB ISA Bridge (rev. 0x01)
>ichlpcib0: TCO (watchdog) timer configured.
>ichlpcib0: SpeedStep enabled
>piixide0 at pci0 dev 31 function 1
>piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
>piixide0: bus-master DMA support present
>piixide0: primary channel configured to compatibility mode
>piixide0: primary channel interrupting at irq 14
>atabus0 at piixide0 channel 0
>piixide0: secondary channel configured to compatibility mode
>piixide0: secondary channel interrupting at irq 15
>atabus1 at piixide0 channel 1
>Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
>auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
>auich0: interrupting at irq 11
>auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
>auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
>Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
>isa0 at ichlpcib0
>isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
>isapnp0: no ISA Plug 'n Play devices found
>WARNING: Callback scheduled before sysmon task queue thread present.
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>ieee1394if0: bus manager 0 (me)
>timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
>auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
>audio0 at auich0: full duplex, mmap, independent
>wd0 at atabus0 drive 0: <IC25N040ATMR04-0>
>wd0: drive supports 16-sector PIO transfers, LBA addressing
>wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
>wd0: 32-bit data port
>wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
>wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
>boot device: wd0
>root on wd0a dumps on wd0b
>root file system type: ffs
>wdc0 at pcmcia1 function 0: <TOSHIBA THNCF128MMG , , , >
>wdc0: i/o mapped mode
>atabus2 at wdc0 channel 0
>wd1 at atabus2 drive 0: <TOSHIBA THNCF128MMG>
>wd1: drive supports 1-sector PIO transfers, LBA addressing
>wd1: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors
>wsdisplay0: screen 1 added (80x25, vt100 emulation)
>wsdisplay0: screen 2 added (80x25, vt100 emulation)
>wsdisplay0: screen 3 added (80x25, vt100 emulation)
>wsdisplay0: screen 4 added (80x25, vt100 emulation)

Actions: View

Attachments on bug 8166: 6859 | 6860 | 6861

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.