I'm using xorg 6.8.1 with: 01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01) The problem is that mplayer with vo=xv show only blue screen instead of picture. There was no problem with exactly the same config on 6.7.0. I'm running in 16 bit depth on 1024x768. Running with vo=x11 of course works without any problems. [arekm@mobarm ~]$ xvinfo X-Video Extension version 2.2 screen #0 Adaptor #0: "Savage Streams Engine" number of ports: 1 port base: 56 operations supported: PutImage supported visuals: depth 16, visualID 0x22 depth 16, visualID 0x23 depth 16, visualID 0x24 depth 16, visualID 0x25 number of attributes: 5 "XV_COLORKEY" (range 0 to 16777215) client settable attribute client gettable attribute (current value is 2110) "XV_BRIGHTNESS" (range -128 to 127) client settable attribute client gettable attribute (current value is 5) "XV_CONTRAST" (range 0 to 255) client settable attribute client gettable attribute (current value is 128) "XV_SATURATION" (range 0 to 255) client settable attribute client gettable attribute (current value is 128) "XV_HUE" (range -180 to 180) client settable attribute client gettable attribute (current value is 0) maximum XvImage size: 1024 x 1024 Number of image formats: 6 id: 0x32595559 (YUY2) guid: 59555932-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: YUV (packed) id: 0x32315659 (YV12) guid: 59563132-0000-0010-8000-00aa00389b71 bits per pixel: 12 number of planes: 3 type: YUV (planar) id: 0x30323449 (I420) guid: 49343230-0000-0010-8000-00aa00389b71 bits per pixel: 12 number of planes: 3 type: YUV (planar) id: 0x35315652 (RV15) guid: 52563135-0000-0000-0000-000000000000 bits per pixel: 16 number of planes: 1 type: RGB (packed) depth: 15 red, green, blue masks: 0x1f, 0x3e0, 0x7c00 id: 0x36315652 (RV16) guid: 52563136-0000-0000-0000-000000000000 bits per pixel: 16 number of planes: 1 type: RGB (packed) depth: 16 red, green, blue masks: 0x1f, 0x7e0, 0xf800 id: 0x31313259 (Y211) guid: 59323131-0000-0010-8000-00aa00389b71 bits per pixel: 6 number of planes: 3 type: YUV (packed) (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16 (==) SAVAGE(0): RGB weight 565 (==) SAVAGE(0): Default visual is TrueColor (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) SAVAGE(0): Using HW cursor (==) SAVAGE(0): Using video BIOS to set modes (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) SAVAGE(0): initializing int10 (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0): VESA VBE Version 2.0 (II) SAVAGE(0): VESA VBE Total Mem: 15296 kB (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Twister BIOS (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1 (--) SAVAGE(0): Chip: id 8d02, "ProSavage KN133" (--) SAVAGE(0): Engine: "ProSavage" (--) SAVAGE(0): mapping MMIO @ 0xdfe80000 with size 0x80000 (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) (--) SAVAGE(0): probed videoram: 16384k (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) SAVAGE(0): VESA VBE DDC supported (II) SAVAGE(0): VESA VBE DDC Level none (II) SAVAGE(0): VESA VBE DDC transfer in appr. 0 sec. (II) SAVAGE(0): VESA VBE DDC read failed (--) SAVAGE(0): Detected current MCLK value of 14.318 MHz (II) SAVAGE(0): Monitor0: Using hsync range of 30.00-70.00 kHz (II) SAVAGE(0): Monitor0: Using vrefresh range of 50.00-90.00 Hz (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "640x512" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "640x512" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "896x672" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "896x672" (hsync out of range) (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "928x696" (hsync out of range) (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "928x696" (hsync out of range) (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "960x720" (hsync out of range) (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "960x720" (hsync out of range) (II) SAVAGE(0): Not using default mode "1152x768" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "700x525" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1024" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "960x720" (hsync out of range) (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (--) SAVAGE(0): Found 11 modes at this depth: [10e] 320 x 200, 70Hz [111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz [114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz [117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz [11a] 1280 x 1024, 60Hz, 75Hz [11d] 640 x 400, 70Hz [122] 1600 x 1200, 60Hz [133] 320 x 240, 72Hz [13c] 1400 x 1050, 60Hz, 75Hz [143] 400 x 300, 72Hz [153] 512 x 384, 70Hz (**) SAVAGE(0): Virtual size is 1024x768 (pitch 1024) [...] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) SAVAGE(0): initializing int10 (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0): VESA VBE Version 2.0 (II) SAVAGE(0): VESA VBE Total Mem: 15296 kB (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Twister BIOS (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1 (--) SAVAGE(0): mapping framebuffer @ 0xd0000000 with size 0x1000000 (==) SAVAGE(0): Write-combining range (0xd0000000,0x1000000) (--) SAVAGE(0): Chose mode 117 at 85Hz. (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SAVAGE(0): Using 1279 lines for offscreen memory. (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) SAVAGE(0): Backing store disabled (**) Option "dpms" (**) SAVAGE(0): DPMS enabled (==) RandR enabled [arekm@mobarm /mnt/storage3/oftp/Video]$ mplayer xorg.avi MPlayer 1.0pre5-3.3.4 (C) 2000-2004 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1534 MHz (Family: 6, Stepping: 1) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Compiled with runtime CPU detection - WARNING - this is not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection. Reading config file /etc/mplayer/mplayer.conf Reading config file /home/users/arekm/.mplayer/config Reading /home/users/arekm/.mplayer/codecs.conf: 73 audio & 180 video codecs font: can't open file: /home/users/arekm/.mplayer/font/font.desc font: can't open file: /usr/share/mplayer/font/font.desc Using Linux hardware RTC timing (1024Hz). Input config file /home/users/arekm/.mplayer/input.conf parsed: 53 binds Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0 : Brak dostępu Can't init input joystick Setting up LIRC support... mplayer: could not connect to socket mplayer: Nie ma takiego pliku ani katalogu Failed to open LIRC support. You will not be able to use your remote control. Playing xorg.avi. Cache fill: 0,00% (0 bytes) AVI file format detected. AVI_NI: No audio stream found -> no sound. AVI: No audio stream found -> no sound. VIDEO: [DIVX] 858x774 24bpp 25,000 fps 4041,2 kbps (493,3 kbyte/s) Clip info: Software: MEncoder 1.0pre4-3.3.3 vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4) ========================================================================== Audio: no sound Starting playback... VDec: vo config request - 858 x 774 (preferred csp: Planar YV12) Opening video filter: [pp] VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1,11:1 - prescaling to correct movie aspect. VO: [xv] 858x774 => 858x774 Planar YV12 [fs] V: 1,2 30 23% 124% 0,0% 0 0 71%
*** This bug has been marked as a duplicate of 1417 ***
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.